Double Suction Centrifugal Supply Water Pump - China

Double suction centrifugal water pump The working principle of a double suction pump is based on the basic principle of a centrifugal pump Impeller design: The impeller of a double suction pump consists of two back-to-back impellers, which allows liquid to enter from both ends of the impeller simultaneously, thereby increasing the flow rate.

The operation of a double suction pump The role of centrifugal force: When the impeller rotates at high speed, the liquid is thrown out of the impeller under the action of centrifugal force, forming a high-pressure area.

Formation of Low Pressure Zone: A low-pressure zone is formed at the center of the impeller, where atmospheric pressure continuously draws liquid into the center of the impeller.

Circulation process: After the liquid is thrown out, it flows into the pressurized water pipeline through the volute, forming a continuous suction and discharge process.

Difference from single suction pump Water inlet method: Double suction pumps inlet water from both ends of the impeller, while single suction pumps inlet water from one end of the impeller.

Flow rate: Due to the design of the double suction pump impeller, its flow rate can be doubled under the same impeller outer diameter.

Price: Double suction pumps are usually priced higher than single suction pumps due to their complex structural design.

Double suction pumps have been widely used in engineering due to their high flow rate and head characteristics.

For example, in transportation systems that require a large amount of fluid, double suction pumps can effectively meet the demand, and their horizontally split pump casing design is also easy to inspect and maintain.

In addition, the design of the inlet and outlet of the double suction pump in the same direction and perpendicular to the pump shaft is beneficial for the layout and installation of the pump and inlet and outlet pipes.

‌

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.