Dg Industry Boiler Feed Water Pump - China

DG industry boiler feed water pump is single suction multistage hot water centrifugal pump.

DG boiler feed water pump is used to convey clean water or other liquids with similar physical and chemical properties to clean water.

Liquids temperature is no higher than 105 DegC.

DG feed water pump is suitable for small boiler feed water or transfer of hot water and other similar medium to hot water.

The suction inlet and discharge outlet of the multistage pump are vertically upward and the axial force of the rotor is balanced by the balancing plate.

The shaft seal may be either a packing seal or a mechanical seal.

The bearings of the rotor are lubricated by plain bearings with thin oil (for DG85-67, DG85-80, DG55-67) and other models have rolling bearing.

Flow(Q): 6 to 346m3/h

Head；102-1050m

Rotation direction: From the motor end, the pump rotates clockwise.

Material of main parts: Cast iron or cast steel (for DG8580, 200DG43)

Supply pump, motor, check valve, gate valve, base.

Application: ”

DG boiler feed water pump is Suitable for medium and low pressure boiler water supply, factory, city high lift water transmission.

DG pump is used to convey clean water or liquid with similar physical and chemical properties to clean water, the temperature of conveying medium: -20 to 105℃ (except DG85-80 and 200DG43, the temperature of conveyed medium is -20℃to 150℃), the inlet pressure of the pump shall not exceed 0.6Mpa (6kgf/cm2).

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.