D Dg Multistage Horizontal Supply Water Pump - China

D, DG multistage horizontal single suction sectional type centrifugal pump is used to convey clear water or other liquids similar to water.

D multistage centrifugal pump is used to transfer the water with temperature lower than 80 DegC and widely used for water discharge in mine, factories and cities etc.

DG Series multistage pump is used to transfer the water with temperature lower than 105 DegC and widely used for water supply of various boilers.

Medium D multistage pump is used for clear water and DG multistage pump is used for water supply of boilers and water temperature is higher than 100 DegC.

Material: D multistage pump is normally made of cast iron and DG multistage pump is normally made of cast steel for the high head and medium with high temperature.

Structure: D multistage pump is without cooling system.

DG multistage pump is with cooling system.

D, DG multistage pump is mainly composed of stator, rotor, bearing and shaft seal: The stator part is mainly composed of suction segment, middle segment, discharge segment and guide vane, and each segment is clamped with tension bolts to form a workroom.

D pump is with general horizontal suction and vertical discharge.

D pump used for oilfield water injection, pump inlet and outlet are vertical upward.

DG type pump is with vertical out and inlet .

The rotor is mainly composed of shaft, impeller, balance disc and shaft sleeve.

The axial force is balanced by the balance plate.

The bearing is mainly composed of the bearing body, bearing and bearing gland.

The bearing is lubricated with grease or thin oil.

The shaft seal adopts soft packing seal, which is mainly composed of inlet section and sealing box, packing and water retaining ring on the tail cover.

D - type pump water seal water from the pump pressure water.

DG pump water seal water from external supply.

The drive pump is driven directly by the electric motor through an elastic coupling.

Look at the pump from electric motor end, the pump rotates clockwise

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.