Automatic Coupling Type Submersible Sewage Dewatering Pump - China

Submersible sewage pumps generally adopt automatic coupling (hereinafter referred to as auto coupling) installation method.

The auto coupling installation system mainly consists of a quick interface, water drainage base, guide rail, guide rail positioning bracket, etc.

During installation, the pump body and quick interface are tightly connected together by bolts.

The water drainage base is first fixed in the water tank by anchor bolts, and the quick interface drives the pump to slide down along the guide rail.

It is automatically coupled and installed with the water drainage base through the auto coupling sealing surface.

After installation, the entire pump body and motor are connected together by the pump body outlet flange and the quick interface inlet flange.

There is a rubber sealing ring between the outlet of the submersible sewage pump and the coupling interface of the auto coupling base.

The submersible sewage pump is suspended in the air through the auto coupling system and the sealing ring is compressed by its own weight to ensure reliable sealing between pipelines.

The main components of the WQ submersible sewage pump are the impeller, pump body, and submersible motor.

The water pump and motor are on the same shaft, and since the water pump is located at the bottom of the entire sewage pump, it can maximize the suction of excess sewage from the ground.

The WQ submersible sewage pump is suitable for conveying granular sewage and waste in industries such as chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction sites, etc.

It can also be used to pump clean water and corrosive media.

Pump can be made of cast iron or stainless steel material and equipped with high quality mechanical seal.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.