Ametek Pressure Transmitter Sta Kool Cooling Element - China

Description

Model 742 Pressure Transducer ( General Information) : The 742 Pressure Transducer has been specially designed to meet the needs of military and/ or marine applications and conforms to military specification MIL- T- 24742 ( SH) .

The 742 accurately measures pressure and transmits a fully adjustable 4 to 20 mA or 0- 5 VDC output signal for remote display, recording, or control.

Model 742R Gage Pressure Version: The 742R is available in gauge, compound, vacuum and absolute ranges from 30”Hg vacuum to 0- 10, 000 psi.

Model 742D Differential Pressure Version: The 742D is available in differential ranges from 10 inches of water to 600 psi.

Direct Replacement

The 742D transducer is directly interchangeable with existing pressure transducers designed to MIL- T- 24742 - The mounting is designed to match the footprint of existing transducers for quick and easy installation.

Minimal Maintenance

Calibration is quick and easy with the non- interacting zero and span adjustments.

Â

Specifications

Functional SpecificationsÂ

in accordance with MIL- T- 24742 ( SH)

Applications

steam, sea water, fl ue gas, ammonia, oxygen, other gases, fresh water, condensate, nitrogen, inert gases and liquid hydrocarbons

Output

4- 20 mADC, 0- 5 VDC

Power Supply

28 VDC ±4.5 VDC with reverse polarity protection

Loop Resistance

0 to 250 ohms

Zero/ Span Adjustments

±5% full scale output

Temperature Limits

Compensated: 0°C to 65°C ( 32°F to 149°F)

Overpressure

200% of range or maximum rated line pressure ( whichever is greater)

Humidity

0 to 100% RH

Volumetric Displacement

less than 0.002 cc

Weight

18 oz.

( 0.51 kg)

5 - AMETEK pressure transmitter Model 831

The Model 831 transmitters are the most durable, accurate and cost effective fixed range pressure transmitter available.

An all 316 stainless steel transmitter, it is designed for years of stable performance in even the toughest environmental and corrosive media conditions.

With its all- welded construction, this transmitter is weatherproof and capable of a direct spray with forces up to 200 psi without internal leakage.

The Model 831 ( standard and low power) has FM and CSA explosion- proof ratings.

The 831D ( differential pressure) also carries the CSA explosion- proof rating.

All Model 831s meet NACE standards for offshore applications.

A one year warranty is standard with every unit.

The small size and light weight of the Model 831 transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby substantially reducing installation time.

The in- line connection permits simple field wiring without the need for additional hardware, adding to the speed and ease of installation.

The standard Model 831 and the Model 831D feature a 4 to 20 mA output standard with a 12 to 30 VDC power supply.

The Model 831 Low Power provides a three wire 1- 5 or 0.8- 3.2 voltage output and requires less than 30 millwatts of total power to operate.

The combination of low power requirement, small size, excellent performance and low price make the Model 831 Low Power Transmitter ideal for critical outdoor applications.

This model requires 6 or 8- 14 VDC excitation and is available in pressure ranges from 15 to 5000 psi.

Overall Features

• Available in Differential Pressure, Low Power or Standard version

• All welded 316L stainless steel construction and wetted parts

• 3/ 4 inch NPT female conduit connection cable

• 1/ 2 inch NPT female pressure port

• 24 inch cable length standard

• All models are CSA approved, explosion proof, and meet NACE standards for off- shore applications

• The Low Power and Standard versions are FM approved with the explosion proof rating

Product Features

Model 831 Standard

• Available in pressure ranges from 6 psig to 5000 psig

• Rugged construction

• Available with conduit adapter

• Optional EMI protection

Model 831 Low Power

• 8 to 14 or 6 to 14 VDC with reverse polarity protection

• Perfect for solar or battery applications

• Current draw < 3 mA

Model 831D

• Measures differential pressure

• Available in pressure ranges from 6 psid to 500 psid

Functional Specifi cation Service

Standard Pressure Ranges

Null Offset at 77°F ( 25°C)

Span Offset at 77°F ( 25°C)

Power Supply ( Transmitter must be powered by an approved power supply.

)

Loop Resistance ( max.

) for mA or Load ( min.

) for VDC

Operating and Electronics ( Ambient)

Process Interface and Storage

Compensated

Burst Pressure

Overrange Limits

Humidity Limits

Accuracy

Stability

Temperature Effect ( between - 20° and 180°F ( - 29° and 82°C) Referenced to 77°F ( 25°C)

Zero and Span

Vibration Effect

Overrange Effect

Physical Specifications

Process Wetted Parts

Non Wetted Parts

Safety Classifications

6 - AMETEK pressure transmitter Model 851

The Model 851 is designed for years of stable performance in even the toughest environmental and media conditions, such as refineries, petrochemical facilities, paper & pulp plants, and waste water treatment facilities.

Approvals include FM and CSA for explosion- proof and CSA for intrinsic safety ratings.

The Model 851 also meets NACE standards for offshore applications.

A one year warranty is standard with every unit.

The small size and light weight of the Model 851 transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby reducing installation time substantially.

The in- line connection permits simple fi eld wiring without the need for additional hardware, adding to the speed and ease of installation.

Its slim profi le allows for mounting in places too tight for most other transmitters.

A 4- 20 mA output is standard with a 12- 40 VDC power supply.

The Model 851 is bench adjustable, allowing for calibration of zero and span.

With the cover sealed double O- ring assembly, this transmitter is weather proof and capable of direct spray, clean- in- place applications

Ambient Operating

FM Intrinsically Safe: - 40° to 140°F ( - 40° to 60°C)

FM Explosion- proof: - 40° to 180°F ( - 40° to 82°C)

CSA Intrinsically Safe T3C: - 40° to 140°F

( - 40° to 60°C)

CSA Explosion- proof: - 40° to 180°F ( - 40° to 82°C)

Process Interface

- 40° to 212°F ( - 40° to 100°C)

Storage

Overhang

300% upper range limit

7 - AMETEK pressure transmitter Model 88

Standard Version ( Model 88C) :

A full- featured, all stainless steel transmitter, Model 88 is designed for years of stable performance in even the toughest environmental and media conditions.

Approvals include FM and CSA for explosion- proof and CSA for intrinsic safety ratings.

The Model 88 also meets NACE standards for offshore applications.

A five year warranty is standard for the 88C.

The small size and light weight of the Model 88 Transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby reducing installation time substantially.

The integral junction box permits simple field wiring without the need for additional hardware, adding to the speed and ease of installation.

An amplifier PCB enclosed in a sealed chamber is used to convert the millivolt signal from the sensor to a calibrated 4 to 20 mA transmitter output.

Feedthroughs for EMI and RF protection are used between the amplifier board and the terminal housing.

A 4 to 20 mA output is standard with a 12 to 40 VDC power supply.

With all 316 stainless steel welded construction, the Model 88 is compatible with corrosive media and hazardous environments.

With the cover retained by a stainless steel chain and no internal jumpers for span turndown, losses due to misplaced or dropped parts are eliminated.

Flushmount Version ( Model 88F) :

The Model 88F Pressure Transmitter is a durable, full featured, flush diaphragm pressure transmitter with all the features of the standard Model 88C.

In addition, it is designed to mount flush against process media and to prevent any media particles, such as from paper slurry, from collecting at the diaphragm.

Its rugged 316 stainless steel and HASTELLOY® C construction make it perfect for tough environments and corrosive media conditions.

Surge Current Rating

30, 000 amperes on 8x20 µs wave

Response Time

Less than 1 nanosecond

Leakage

Very low ( in the microampere range)

8 - AMETEK pressure transmitter Model 89

DescriptionÂ

Model 89 Pressure Transducer ( General Information) : The Model 89 pressure transducer has been specially designed to meet the needs of military and/ or marine applications and conforms to military specifications.

The Model 89 accurately measures pressures and transmits a fully adjustable 4- 20 mA output signal for remote display, recording or control.

The Model 89 is available in gage, compound, vacuum and absolute ranges from 30”Hg vacuum to 0- 6000 psi and differential pressures from 300 inch wtr to 400 psi.

Model 89 Gage Pressure Version, QPL- MIL- R- 24212C ( SH)

• Available in gauge, compound, vacuum and absolute ranges from 30”Hg vacuum to 0- 6, 000 psi.

Model 89 Differential Pressure Version, QPL- MIL- D- 24304B ( SH)

• Available in differential ranges from 300 inches of water to 400 psi.

Direct Replacement

The Model 89 transducer is directly interchangeable with existing pressure transducers designed to MIL- Standards.

The mounting is designed to match the footprint of existing transducers for quick and easy installation.

Minimal Maintenance

Functional Specifications

in accordance with

MIL- P- 24212C ( SH)

steam, oil, sea water, fl ue gas, ammonia, oxygen, other gases, fresh water, condensate

4- 20 mADC

28 VDC ±4.5V with reverse protection

0- 250 ohms

8% F.

S.

output

200% of range up to maximum of 10, 000 psi ( whichever is less)

0- 100% RH

9 - AMETEK pressure transmitter Model ACT

Description

The Model ACT builds upon the successful DCT product line by offering an Analog Compensated Transducer with 0 to 100mV output.

The Model ACT is ideal for OEM customers that desire high- speed differential outputs into their control system.

The Model ACT is available in brass and stainless steel.

This product is offered in a variety of mounting options, stainless steel or brass construction, and numerous pressure ranges.

It is fully compensated for the ef-

fects of pressure and temperature change and calibrated to produce industry standard electrical outputs.

The ACT accepts both regulated and pulsed excitation voltages and provides output signals such as 0 to 100mV.

The ACT Transducer is offered in pressure ranges from 1 psi up to and including 3000 psi.

The Model ACT is extremely accurate, less than ±0.3% full scale over pressure.

The universal design incorporates a stainless steel isolation diaphragm and 316 stainless steel construction for use with most media types.

An economical non- isolated brass transducer, used for clean, dry media is also available.

The ACT offers premium performance and versatility of use for many applications, both for the general industrial end user and original equipment manufacturers ( OEM) .

It combines precision along with the durability to operate under difficult environmental conditions.

The ACT is manufactured in the United States under ISO 9001: 2008 control.

Pressure Range

Vacuum to 3000 psi ( brass limited to 500 psi

Reference Accuracy( includes repeatability, hysteresis, non- linearity – BFSL)

±0.2% full scale TYP, ±0.3% full scale maximum ( consult factory for ranges below 15 psi)

1 Yr.

Stability

<0.25% full scale

Thermal Effect On Null

±2% full scale ( ±1% typical) TYP over compensated range

Thermal Effect On Span

±2% full scale ( ±1% typical) TYP over compensated range ( 2% maximum)

Operating Temperature

- 40°C to 80°C

Process Temperature

- 40°C to 100°C

Compensated Temperature

- 5°C to 55°C

0 to 100 mVDC @ 10 VDC

Maximum Input Supply Voltage

10 VDC, output ratiometric with input from 2V to 10 VDC

Output Resistance

3.5 KΩ to 6 KΩ

3x full scale for all ranges except 300 and 500 psi units, which have a burst pressure of 750 psi; higher over- pressure upon request

Vibration

10G, 55 to 2000 Hz

Shock

30G

Process Wetted Material

316L stainless steel; ( borosilicate silicon, RTV, epoxy on brass models)

Housing Material

Aluminum or ULTEM ( for Packard connector)

Process Connection

7/ 16- 20 SAE, 1/ 8 NPT, 1/ 4 NPT*

Electrical Connection

Cable, DIN, Packard, conduit ( 1/ 2 NPT only) *

Less than 5 oz.

( 140 grams)

Temperature Measurement Option

Additional linear temperature measurement available, please consult factory

10 - AMETEK pressure transmitter Model DCT

The Model DCT Pressure Transducer is designed for general industrial and commercial requirements offering excellent performance over a wide range of applications.

This model is based on proven micro- machined silicon technology providing high reliability, long- term stability, and low cost relative to competing technologies.

AMETEK has been developing and manufacturing high performance pressure sensing products for nearly 100 years, and the DCT brings a new level of accuracy to the AMETEK product portfolio.

This product is offered in a variety of mounting and electrical output options, stainless steel or brass construction, and numerous pressure ranges.

It is fully digitally compensated for the effects of pressure and temperature change and calibrated to produce industry standard electrical outputs.

The DCT accepts both unregulated and regulated excitation voltages and pro- vides output signals such as 1 to 5 VDC, 1 to 6 VDC, 0 to 5 VDC, 0.5 to 4.5 VDC ratiometric and 4 to 20mA.

The DCT Transducer is offered in pressure ranges from 1 psi up to and including 3000 psi.

The Model DCT is extremely accurate, less than ±0.3% full scale over pressure and less than ±1.0% full scale over a wide compensated temperature range ( ±0.5% full scale optional) .

The design incorporates a stainless steel isolation diaphragm and 316 stainless steel construction for use with most media types.

An economical non- isolated brass transducer, used for clean, dry media is optional.

The DCT offers premium performance and versatility of use for many applications, both for the general industrial end user and original equipment manufacturers ( OEM) .

It combines precision along with the durability to operate under difficult environmental conditions.

Also available is the ACT, an analog compensated 0- 100 mV unit in brass and SST.

The DCT and the ACT are manufactured in the United States under ISO 9001: 2008 control.

Pressure Ranges*

Vacuum to 3000 psi

1 psi full scale

6 psi full scale

15 psi full scale

30 psi full scale

60 psi full scale

100 psi full scale

150 psi full scale

200 psi full scale

300 psi full scale

500 psi full scale

1000 psi full scale

2000 psi full scale

3000 psi full scale

Reference Accuracy ( includes repeatability, hysteresis, non-

linearity – BFSL)

Total Error Band ( includes temperature effects and null and span

set points)

±1% full scale ( ±0.5% typical, consult factory for ranges below 15 psi

- 25°C to 75°C

3x full scale for all ranges except 300 psi and

500 psi units, which have a burst pressure of 750 ps

EMC

Rated 3 V/ m ( requires “PE” option)

11 - AMETEK pressure transmitter Model IND- 100

The Model IND- 100 Pressure Transmitter has been designed for use in a variety of industrial applications such as plant process and utility pressure measurements, compressor control, and hydraulic and pneumatic manufacturing systems.

The AMETEK IND- 100 offers exceptional reliability in industrial as well as outdoor environments.

It provides unequaled performance and is perfectly suited for the demanding price requirements of this market.

EMI/ RFI resistance is critical and is provided on the AMETEK IND- 100 Transmitter as protection against noise- generating variable speed motors and radio equipment that is common on the factory fl oor.

In addition, all AMETEK transmitters are thermally compensated over a wide temperature range to handle outdoor environments.

AMETEK utilizes the most stable sensor available for IND- 100 transmitters, sputtered METAL THIN FILM technology.

The wetted surfaces are 316L, and Hastelloy.

The circuits are isolated from external interference with RFI/ EMI fi lters and a power limiting circuit which has been agency approved to meet Class I, Div.

1 intrinsic safety standards.

IND- 100 transmitters with pigtail connectors are also NEMA 4x rated to meet the needs of outdoor installations.

AMETEK will supply the product through its global distribution partner network so each application will receive personal support throughout the life of the product.

Service

Liquid, gas or vaporÂ

Range Limits

100 psig, 250 psig, 1000 psig, 2000 psig, 3000 psig; alternate

ranges, including bar also available ( consult factory)

4- 20 mA, 2- wire, current limited, 0- 5 VDC

12- 30 VDC with reverse polarity protection

0 ohms at 12 VDC; 900 ohms at 30 VDC ( mA onlyÂ

Output Loading

75 kohm ( VDC output only

Span/ Zero Adjustment

±5% of FS

Compensated: 0° to 50°C

Operating: - 25° to 85°C

Storage: - 40° to 85°C

0- 95% RH, pigtail modeb

Overrange

150% FS

400% FS

Hazardous Locations

Intrinsic safety ( with barrier) : Class I, Div.

1

Non- incendive: Class I, Div.

2

12 - AMETEK pressure transmitter Model LMA

Lightning protection units are available to help protect your AMETEK U.

S.

Gauge, PMT Products Level Measurement System from unexpected lightning and secondary surges.

These high performance LP units are easy to install, are maintenance- free and respond in less than one nanosecond.

When placed at the meter and at the transmitter, they defend against powerful surges on both the signal and power lines.

If a surge should occur, the LP unit will clamp the circuit, preventing excessive voltage from damaging your sensitive equipment.

This saves you replacement and downtime costs.

Features

• Protection for the LevelMate, Model DMC Meter, Model SST, and Model

• 575 Transmitters

• Nanosecond, bipolar response

• AC and DC protection available

• Powerful surge protection

• Small, compact size

• New or existing installation

• Enhances system integrity

• Reduces downtime

• Maintenance free

13 - AMETEK pressure transmitter Model SPT

The Model SPT general purpose industrial pressure transducer is designed for use in a variety of industries.

Providing excellent media compatibility with all 316 stainless steel wetted parts, it is perfectly suited for applications where media compatibility is a problem.

With its superb stability, low cost and proven reliability, it is ideal for OEM applications.

This model provides a high level voltage output from an unregulated supply.

Each unit is shipped fully compensated for pressure and temperature and is completely interchangeable without the need for further calibrations.

The SPT features a solid state silicon piezoresistive sensing element, electrostatically bonded to glass to virtually eliminate the effects of induced stress and vibration.

Behind every SPT series transducer is over 15 years of stainless steel/ oil isolation technology.

The silicon sensor is completely isolated via an oil- filled chamber.

The transducer has a computer- controlled laser trimmed custom hybrid circuit which standardizes output and provides precise temperature and pressure compensation.

Rugged construction and a standard Packard electrical connector make it truly cost effective.

Pressure Range1

Reference ordering information rangesÂ

Maximum Overpressure

2 times full scale

Burst Pressure ( At 25°C)

3 times full scale or 12500 psi, which- ever is less ( 300 and 500 psi limited to 750 psi maximum)

Excitation

8 to 15 VDC

Null Offset ( At 25°C)

1.0 VDC ±2% span

Span ( At 25°C)

5.0 VDC ±1% span

±0.25% span from best fit straight line including non- linearity, repeatability and hysteresis

Operating Temperature Range

- 40° to 105°C

Compensated Temperature Range

- 5° to 55°C

Thermal Effect On Zero ( Null) 2

±0.5% span ( typical) overcompensated temperature range, 2% max

Thermal Effect On Span2

<20 milliseconds

±0.25% span/ year

Shock3

50 g

50 grams

Electrical Terminations

Packard connector # 12162189 with 18 inch leads

Media Compatibility

316 stainless steel wetted parts

Passes MIL- STD- 202F Method 103B, Condition A

Protection Class

IP- 64

Output Impedance

>50K ohms

14 - AMETEK pressure transmitter Sta- Kool Cooling Element

Extreme process temperature reduces the accuracy, reliability, durability, and the overall life of a pressure gauge.

The AMETEK U.

S.

Gauge ( USG) Sta- Koolâ„¢ cooling element was designed for pressure measurements with this extremely high temperature environment in mind.

 Under actual laboratory testing condition, in still room air, the 316L stainless steel Sta- Kool™ cooling element was able to reduce 400°F ( 204°C) liquid process temperature

down to 100°F ( 38°C) at the active portion of the Bourdon tube ( see chart 1 on next page) .

AMETEK USG recommends using a Sta- Kool™, capillary or diaphragm seal to protect pressure gauges, pressure transmitters or pressure switches ( not supplied by USG) from process temperatures exceeding 190ºF.

Anything exceeding 190ºF will start to degrade weld joints and electronics.

The Sta- Koolâ„¢ can be either threaded or welded ( to eliminate a potential leak path) to any pressure gauge with 1/ 2' NPT male connection made out of

compatible material.

Furthermore, the Sta- Koolâ„¢ cooling element can be attached in between a pressure gauge and diaphragm seal for the most comprehensive process measurement protection possible, protecting the instrument from pulsation and temperature extremes.

Connection

1/ 2- 14 NPT male X 1/ 2- 14 NPT female

Body Material

316L stainless steel

15 oz.

( 0.4 kg

Operating Parameters

5000 psi maximum at 100°F ( 38°C)

750ºF ( 400°C) maximum at 3500 ps

Company Contact:

• Posted By: Contranspower Co., Ltd

• Phone: 862860201516

• Address: Huayangnian,huahaoyuan community,Jitou Town, Wuhou, Chengdu , Sichuan , China

• Email:

• Business Description: Established in 2003, Contranspower Co., Ltd was an integrated trading, technology and service company engaged in retail and wholesale of international automotive products, imported hydraulic and pneumatic components, instruments, meters and various kinds of valves and valve accessories.
  
  With establishing partnerships with many international leading manufactures, we can provide customers with a comprehensive range of high quality services from process control valve accessories, petroleum and chemical instruments and meters to industrial automation.
  
  We possess extensive knowledge in technical requirements of related projects and capacity in equipment selection.
  
  We has leading expertise in petroleum and natural gas, petroleum chemical, refining, pulp and paper manufacture, water treatment and various process industries.
  
  The company is the agent for following recognized international brands: Parker Automatic, USA (hydraulic, pneumatic, EMD, CIC, instruments and meters, flow connectors, etc.
  
  ); explosion proof solenoid valves from ASCO (USA), Kaneko, Konan SMC and CKD (Japan); electrical, hydraulic and pneumatic drives from TYCO BIFFI (USA); Cameron combined hydraulic pneumatic mechanisms, limit switches from WESTLOCK, AVID, HONEWELL (UK) and AZBIL(Japan), valve position controllers from ABC, Siemens, SMC and AZBIL;Borsch Rexroth (Germany), FESTO hydraulic and pneumatic components and Nass coils (German) and so on.
  
  In industrial automation area, the company offers following leading products and services:
  
  Valves, actuators and accessories (mainly for project cooperation)
  
  The company is the selling agent for flow drives (with imported BIFFI) from Cameron and Tyco (USA); Ledeen pneumatic actuators and electrical actuators, and pneumatic hydraulic interlocked actuating mechanism; TYCO AVID valve accessories: filter regulator, solenoid valve; Westlock and AVID value limit switch;and electrical/pneumatic and pneumatic/pneumatic localizers from ABB, Siemens, SMC, AZBIL (Japan) and YAMATAKE.
  
  We also can collaborate with customers in projects with selecting high quality and proven products and supplying complete equipments according to customer specific requirements.
  
  Automatic instruments (including project cooperation)
  
  To provide instruments, meters, automatic devices, filters, flow connectors, seals, etc.
  
  components and parts from the international industrial leader Parker (Parker Hannifin);ASCO explosion proof solenoid valves; Honeywell limit switches (USA), Herion explosion proof solenoid valve (Germany), and transformers, transducers, rasters, isolated gates, flow meters and controllers from TURCK, P+F, Burkert and other domestic and international recognized manufacturers.
  
  Parker, BEKO etc.
  
  imported complete filter series and flow detection products
  
  Only for filter, we can provide more than 5000 kinds of interchangeable components and parts of different brands and provide spare parts supporting services.
  
  Pneumatic components and generic flow controlling valves
  
  Products from Usa, German, Japan, UK and Korean leading manufactures such as PARKER, ASCO JOUCOMAITC, BOSCH, AIRTEC, KANEKO, SMC, CKD, NORGREN, FESTO and YTC; and equivalent products of domestic leading manufacturers.
  
  These products includes various solenoid valves, pneumatic valves, proportioning valves (flow pressure), cylinders, special cylinders, pressure switches, sensors and filter/pressure regulator assemblies.
  
  Hydraulic components and parts and medium small sized system retrofitting
  
  Hydraulic components and parts and whole sets of Parker hydraulic (including engineering hydraulic), Bosch Rexroth, Atos, Rexroth China, Vickers, Moog and equivalents of domestic manufacturers.
  
  We also provide medium small sized system retrofitting services for customers in Sichuan and adjacent provinces.
  
  We hope to have the opportunity to work with you and we will make every effort to satisfy your requirements!
  
  MOOU-8-D12P G-TF
  
  MOOU-8-D12PG-01-TF
  
  M 00U-8-D12PG-TF
  
  M00U-8-D12 PG-01-TF
  
  MOOU-8-D12PG-TF- B
  
  MOOU-8-D12PG-TF-C
  
  MOOU- 8-D12PG-01-TF-B
  
  MOOU-8-D1 2PG-01-TF-C
  
  M00U-8-D12PG- TF-B
  
  M00U-8-D12PG-TF-C
  
  M0 0U-8-D12PG-01-TF-B
  
  M00U-8 -D12PG-01-TF-C
  
  MOOU-8-DE1 2PU
  
  MOOU-8-DE12PU-01
  
  M00U -8-DE12PU
  
  M00U-8-DE12PU-0 1
  
  MOOU-8-DE12PU-B
  
  MOOU-8- DE12PU-01-B
  
  MOOU-8-DE12PU -C
  
  MOOU-8-DE12PU-01-C
  
  M00 U-8-DE12PU-B
  
  M00U-8-DE12P U-01-B
  
  M00U-8-DE12PU-C
  
  M0 0U-8-DE12PU-01-C
  
  MOOU-8-E 22P00
  
  MOOU-8-E22P00-01
  
  M0 0U-8-E22P00
  
  M00U-8-E22P00 -01
  
  M00U-8-E22P00-B
  
  M00U- 8-E22P00-01-B
  
  M00U-8-E22P 00-C
  
  M00U-8-E22P00-01-C
  
  M OOU-8-E22P00-01
  
  MOOU-8-E2 2P00-B
  
  MOOU-8-E22P00-01-B
  
  MOOU-8-E22P00-C
  
  MOOU-8-E 22P00-01-C
  
  MOOU-8-E22P0L
  
  M00U-8-E22P0L
  
  MOOU-8-E22P 0L-B
  
  M00U-8-E22P0L-B
  
  MOOU -8-E22P0L-C
  
  M00U-8-E22P0L -C
  
  M15G-8-D12PG-TF
  
  M15G-8 -D12PG-TF-B
  
  M15G-8-D12PG- TF-C
  
  M15G-8-DE12PU
  
  M15G-8 -DE12PU-B
  
  M15G-8-DE12PU-C
  
  M15G-8-E22P00
  
  M15G-8-E22 P00-B
  
  M15G-8-E22P00-C
  
  M15 G-8-E22P0L
  
  M15G-8-E22P0L- B
  
  M15G-8-E22P0L-C
  
  M15G-8- IEX01A
  
  M15G-8-IEX01B
  
  M15G -8-IEX01C
  
  MOODU-8D12PRS-M -TF
  
  MOODU-8D12PRS-01-M-TF
  
  M00DU-8D12PRS-M-TF
  
  M00DU -8D12PRS-01-M-TF
  
  MOODU-8D 12PRS-M-TF-B
  
  MOODU-8D12PR S-01-M-TF-B
  
  M00DU-8D12PRS -M-TF-B
  
  M00DU-8D12PRS-01- M-TF-B
  
  MOODU-8D12PRS-M-TF -C
  
  MOODU-8D12PRS-01-M-TF- C
  
  M00DU-8D12PRS-M-TF-C
  
  M0 0DU-8D12PRS-01-M-TF-C
  
  MOO DU-8-DE12PRS-M
  
  MOODU-8-DE 12PRS-01-M
  
  M00DU-8-DE12PR S-M
  
  M00DU-8-DE12PRS-01-M
  
  MOODU-8-DE12PRS-M-B
  
  MOODU -8-DE12PRS-01-M-B
  
  M00DU-8 -DE12PRS-M-B
  
  M00DU-8-DE12 PRS-01-M-B
  
  MOODU-8-DE12PR S-M-C
  
  MOODU-8-DE12PRS-01- M-C
  
  M00DU-8-DE12PRS-M-C
  
  M 00DU-8-DE12PRS-01-M-C
  
  M15 DG-8-D12PRS-M-TF
  
  M16DG-8- D12PRS-M-TF
  
  M15DG-8-DE12P RS-M
  
  M16DG-8-DE12PRS-M
  
  MK 15G-8-D12PG-TF
  
  MT16G-8-D1 2PG-TF
  
  MK15G-8-DE12PU-DMI
  
  MT15G-8-DE12PU
  
  MT16G-8-D E12PU
  
  MK15G-8-E22P00-DMI
  
  MT16G-8-E22P00
  
  MK15G-8-E2 2P0L-DMI
  
  MT16G-8-E22P0L
  
  M K15G-8-IEX01-DMI
  
  MT16G-8- IEX01
  
  MK15G-8-DE12PU-DMI
  
  MT16G-8-DE12PU
  
  MK15G-8-IE X01-DMI
  
  MOOU-8-LE12PU
  
  M00 U-8-LE12PU
  
  M15G-8-LE12PU
  
  MK15G-8-LE12PU
  
  MOOU-8-CE1 2PU-DL
  
  MOOU-8-CE12PU-01-D L
  
  M00U-8-CE12PU-DL
  
  M00U-8 -CE12PU-01-DL
  
  M15G-8-CE12 PU-DL
  
  MK17G-8-CE12PU
  
  MK17 G-8-E22PO
  
  MK17G-8-E22P0
  
  M 55C-32-AE55
  
  M55C-32-AESS
  
  MB15G-8D-10-CE-12PU
  
  M51RC -8-AE55
  
  M51RC-8-AESS
  
  M55R C-32-AE55
  
  M55RC-32-AESS
  
  M 81RC-8-AE55
  
  M81RC-8-AESS
  
  MB1RC-8-AESS
  
  M65G-32-CE12 PU
  
  MOOU-8-AE12PUT-SDP
  
  MOO U-8-AE12PUT-5DP
  
  MOOU-8-AE 12PUT-01-SDP
  
  MOOU-8-AE12P UT-01-5DP
  
  M00U-8-AE12PUT- SDP
  
  M00U-8-AE12PUT-5DP
  
  M0 0U-8-AE12PUT-01-SDP
  
  M00U- 8-AE12PUT-01-5DP
  
  M15G-8-A E12PUT-SDP
  
  M15G-8-AE12PUT -5DP
  
  M30C-15-AE44-BS11
  
  M3 0C-15-AE66-BS11
  
  M30C-50-A E44-BS11
  
  M30C-50-AE66-BS1 1
  
  M30C-15-AE44-SF12
  
  M30C- 15-AE66-SF12
  
  M30C-50-AE44 -SF12
  
  M30C-50-AE66-SF12
  
  M 31RC-15-AE44-BS11
  
  M31RC-1 5-AE66-BS11
  
  M31RC-50-AE44 -BS11
  
  M31RC-50-AE66-BS11
  
  M31RC-15-AE44-SF12
  
  M31RC- 15-AE66-SF12
  
  M31RC-50-AE4 4-SF12
  
  M31RC-50-AE66-SF12
  
  M22C-10-FE32-SS12
  
  M22C-2 5-FE32-SS12
  
  M23C-10-E22P1 L
  
  M23C-25-E22P1L
  
  M20C-15- CE12PU-035
  
  M20C-25-CE12PU -035
  
  M28C-15-DE55-01
  
  1/28 US-S#208AE55
  
  MZ285C-25-AE 55
  
  MK17G-8-A12PG-TF
  
  MK17G -8-D12PG-TF
  
  M51RC-8-D11
  
  M 55RC-32-D11
  
  M81RC-8-D11
  
  M B1RC-8-D11
  
  M65G-32-A12PG- TF
  
  M65G-32-D12PG-TF
  
  M30C- 15-AE44-BS11-TF
  
  M30C-15-A E66-BS11-TF
  
  M30C-55-AE44- BS11-TF
  
  M30C-55-AE66-BS11 -TF
  
  M30C-15-AE44-SF12-TF
  
  M30C-15-AE66-SF12-TF
  
  M30C -55-AE44-SF12-TF
  
  M30C-55- AE66-SF12-TF
  
  M31RC-15-AE4 4-BS11-TF
  
  M31RC-15-AE66-B S11-TF
  
  M31RC-55-AE44-BS11 -TF
  
  M31RC-55-AE66-BS11-TF
  
  M31RC-15-AE44-SF12-TF
  
  M3 1RC-15-AE66-SF12-TF
  
  M31RC -55-AE44-SF12-TF
  
  M31RC-55 -AE66-SF12-TF
  
  M20C-15-A12 PG-03S-TF
  
  M20C-15-D12PG-0 3S-TF
  
  M20C-25-A12PG-03S-T F
  
  M20C-25-D12PG-03S-TF
  
  K1 -40-B
  
  K1-50-B
  
  K1-80-B
  
  K1- 100-B
  
  K1-150-B
  
  K1-200-B
  
  K 1-250-B
  
  K2-40-B
  
  K2-50-B
  
  K 2-80-B
  
  K2-100-B
  
  K2-150-B
  
  K3-40-B
  
  K3-50-B
  
  K3-80-B
  
  K 3-100-B
  
  K3-150-B
  
  K4-40-B
  
  K4-50-B
  
  K4-80-B
  
  K4-100-B
  
  K4-150-B
  
  K8-40-B
  
  K8-50-B
  
  K8-80-B
  
  K8-100-B
  
  K8-150-B
  
  K5-40-B
  
  K5-50-B
  
  K5-80-B
  
  K5-100-B
  
  K5-150-B
  
  K5-200- B
  
  K5-250-B
  
  K7-40-B
  
  K7-50- B
  
  K7-80-B
  
  K7-100-B
  
  K7-150 -B
  
  K7-200-B
  
  K7-250-B