Air Cooled Finned Tubes Heat Exchangers - China

Air Cooled Heat Exchangers (Fin Fan Coolers) are apart from traditional Tubular heat exchangers manufacturing, We also have good experience in designing and manufacturing air-cooled heat exchangers for various industries.

We can provide various types of Fin Tube for different design applications.

The most common type of Fin Tube used are L, LL, KL, G, Extrusion, and Wire wound.

Finned tubes Heat Exchangers Application for finned tubes heat exchangers:

- Cooling or heating of air process

- Air cooling for electrical machines CACW

- Cooling water

- Transformer oil cooling for terrestrial or offshore equipment.

- Intake air Protection filters for power generation turbines - Marine applications or offshore.

- Air Cooled Heat Exchangers (Fin Fan Coolers)

- Air Cooled Heat Exchangers (Fin Fan Coolers) Construction:

- Flat finned Tubes with turbulators, welded or expanded in collectors FLAT - Possibility of cleaning bundle inspection

- High mechanical strength of the finned block

- Use in restricting industrial environments

- Flat-finned Tubes with turbulators brazed on collectors

- For industrial environments use

- Flat finned Tubes with turbulators expanded into the single or double tube sheet

- Removable header covers to access the tubes for cleaning - Leak detection system with double plates - Double flat finned tubes with turbulators, expand the ed on the double tube sheet - Removable header covers to access the tubes for cleaning - Leak detection - U Finned bundle expanded on tube sheets - Removable covers or complete welded water boxes All exchangers are manufactured and tested in accordance with the European Directive on Pressure Equipment (PED).

On request, they can be subjected to an inspection or certification of your choice.

Mechanical calculations notes are performed according to our standard construction codes or on your request:

- EN 13445

- AD Merkblatter

- STOOMWEZEN

- ASME VIII Div 1 Air Cooled Heat Exchangers:

An air-cooled heat exchanger system uses the ambient air temperature to cool a fluid circulating through a coil.

This type of cooling can be used when the fluid being cooled is 5 F degrees or higher than the ambient temperature.

An air-cooled heat exchanger is comprised of a coil, inlet/outlet headers, fans, motors, a structural stand, and several potential options.

Coils:

Our coil tubes and fins can be manufactured using copper, stainless steel, aluminum, steel, and galvanized steel Inlet/Outlet Headers:

Headers can be threaded pipe, flanged pipe, boxed end headers, and plugged headers Fans:

Aluminum and Plastic fan blades are used in several different configurations.

Fan Arrangement: Induced Draft or Forced Draft Motors:

NEMA and EC.

Direct drive or Belt driven Structural Stand:

Heavy-duty galvanized steel with polyurethane paint, galvanized steel (no paint), or aluminum OPTIONS

- Epoxy-coated fins

- E-Coat over the entire coil

- Air filters

- Fin spacing to meet specific applications

- Individual fan disconnects

- Custom mounting legs to meet height requirements

- Vibration dampers

- Control panels

- Pump Station

- Mist assist (lowers dry bulb temperature of the air before going over the cooling coil)

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.