Tantalite Enrichment Equipment Niobite Ore Extraction Plant Forui Mining Beneficiation - China

Tantalite and niobite content is usually low with its complex

composition.

The density of TaNb mineral is big while the magnetism is

weak.

So there are many beneficiation methods for TaNb enrichmentand its

processing is complex.

The main beneficiation mainly covers gravity

separation, magnetic separation, electric separation, and floatation

separation while sometimes hydrometallurgy will be involved.

Rough separation and fine selection will be needed to get high grade TaNb mineral concentrate.

At this moment, the main beneficiation way for Tantalite and niobite ore is gravity separation with its lowest plant investment.

However, for the micro fine inlay tantalite and niobite ore, the efficiency will be not so good while the recovery rate is low.

Plants of jigging machine, spiral washing machine, shaking table, and centrifugal separator are involved in gravity processing line for tantalite and niobite.

For some uneven inlay TaNb mineral separation, the raw ore shall be crushed t be 10- 15mm, and the rod mill will be involved to to make the ore to be - 2mm, and then the output from the rod mill can go for jigger for rough separation.

Then the shaking table will be involved to upgrade the concentrate from the jigger furtherly.

The tailings from the shaking table can go for spiral washing machine to get the coarse grains of TaNb and the concentrate from spiral washing plant can be upgraded by shaking table.

And final TaNb concentrate can be gained.

Gravity separation is the main way to beneficiate columbite- tantalite ore while sometimes combination of gravity separation- floatation separation- gravity separation, gravity separation- floatation separation, and gravity separation- magnetic separation- floatation separation can be involved.

About the gravity separation of raw columbite- tantalite mineral enrichment, muilti- milling and multi- gravity separation is mainly used.

During the separating machine is usually for each milling machine to recover the liberated columbite- tantalite granules.

Crushing and milling is usually not needed for columbite- tantalite sand ore with its high degree of dissociation.

Screening is used before gravity rough separation to remove the block stone or gravels, and the fine output from screen can be separated by columbite- tantalite jig separator.

The rough concentrate from jigger can be upgraded further by shaking table.

Company Contact:

• Posted By: Gongyi Forui Machinery Factory

• Phone: 008615137815262

• Address: Heluo , Gongyi , Henan , China

• Email:

• Website: http://www.frjig.com

• Business Description: Founded in 1986, Forui machinery factory owns a over 25 year long
  
  history of ore(slag) beneficiation(recovery).
  
  With its enrichment
  
  experience, it becomes a researcher and manufacturer of new energy
  
  saving beneficiation equipment.
  
  Forui is specialized in manufacturing
  
  kinds of metal & non metal beneficiation machines like jiggers, magnetic
  
  separators, floatation separators, ball mills, crushers, etc.
  
  And
  
  national standard for all products is guaranteed.
  
  Forui jiggers and magnetic separators are mainly used in beneficiation of kinds of mines like hematite, limonite, magnetite, siderite, specularite, manganese ore, lead zinc mine, galena, tungsten mine, tin mine, alluvial gold mine, rock gold mine, mercury mine, barite, lapis lazuli, fluorite and so on.
  
  These processing machine for metal or non metal enrichment can also be used for the recovey of kinds of slag or residue like silico manganese salg, ferro chromium salg, ferro manganese slag, nickel slag, stainless steel slag , etc.
  
  With years' efforts, we have gained appreciation & praises from customers all over the world.
  
  Our products have been successfully exported to many countries and regions, like Thailand, Laos, Myanmar, the Philippines, Indonesia, Nigeria, Namibia, South Africa, Russia and the United States, etc.