Sand Dryer Are On Sell - China

Product introduction

Sand dryer or sand drying machine is a handling large

quantity material dryer.

As reliable work, flexible

operation, strong adaptability, large capacity, it widely

used in building material, metallurgy, food, chemical, coal,

medicine in mining industry .

Sand dryer, or sand drying

machine is a rotating cylinder drying machine.

It generally

adapted to granular materials, and can also be used for dry

and sticky paste like material way for some mixed materials

or materials with higher water content.

Especially for dry

sand, Bailing sand drying machine drying effect is excellent

.

Advantages of sand dryer or sand drying machine is the

production of large capacity, wide application range, small

flow resistance, operation allows a larger range, convenient

operation etc.

Because the different materials have high requirement on the

dryer texture , the Bailing dryer’s lifter can choose

different texture depend on the the different material

properties, such as stainless steel, high manganese steel

etc.

! Drying machine roller made of 45Cr material and roller

adopt 35CrMo material .

It is wear- resistant practical! To

the greatest extent to reduce the degree of replacement of

wearing parts of the equipment, it brings great benefits to

customers later equipment repair and production operation!

Working principle

In the process of drying , Sand by belt conveyor or a

bucket elevator to the hopper, and the feed hopper through

the feeding pipe into the feed end.

Feeding pipeline rake

angle must be more than the natural material, so that the

material can flow of dryer smoothly .

Dryer cylinder is a

horizontal rotating cylinder which has slightly tilt.

Material from high end to put in and heat carrier from the

low- end entry put in , then materials into countercurrent

contact with a heat carrier or the material flow into the

cylinder with heat carrier together .

With the rotating end

materials run by gravity to the lower cylinder.

Sand in the

cylinder body to move forward in the process, directly or

indirectly by heat body heat, make the sand to dry, and then

in the discharge by the screw conveyor or belt conveyor .

A

lifter is arranged on the inner wall of the barrel body, it

is the function of the material lifting up and down , the

materials and the contact surface increases airflow, to

improve the drying rate and promote material progress.

Heat

carrier are generally divided into hot air, flue gas.

Heat

carrier by the dryer, the general need of cyclone dust

collector in the gas with material collected.

For further

reduction of exhaust gas dust content, sand should be

through the bag dust collector and wet dust before discharge

.



Sand dryer structure ,

1, cylinder body; 2, the front roll ring; 3, after the roll

ring, gear; 4; 5, 6, a roller; roller; 7, the small gear; 8,

discharging part; 9; Yang plate; 10, reducer, motor; 11; 12,

air duct, 13, feed chute; 14, furnace body, also can

according to user requirements design gas furnace,

combustion chamber or supporting the lifting machine, belt

conveyor, feeder, cyclone dust collector, draught fan.

Product Characteristics

1, Equipment investment is 20% of imported products .

It

adopt wear- resistant manganese plate .

It is more wear-

resistant than ordinary steel 3- 4 times.

2, The material initial moisture is15% , final moisture can

be ensure the following 0.5- 1% .

It is the preferred product

of slag powder, dry mortar production line and other various

drying engineering in cement plant.

3, Its thermal efficiency is more 40% than the traditional

single cylinder drying machine .

4, the fuel can be used anthracite, bituminous coal, coal

gangue, oil, steam.

It can bake 20- 40mm block, granular,

powdery materials.

5, Its area is less about 60% than the single cylinder drying

machine .

Construction investment is reduced by about 60%

and it is convenient for installation.

6, no leakage phenomenon, completely solves the sealing

problem.

7, the material temperature below 60 degrees .

It can be

directly into the database, without cooling roof process.

8, the outer cylinder body temperature is below 60 degrees ,

the temperature of exhaust gas is below 120 degrees, dust

removal equipment bag ' s service time is more than 2 times.

9, coal consumption is 1/ 3 of single cylinder drying machine

, saving 40% power , and tons of standard coal consumption

is below 18 kg.

Henan Bailing River sand dryer technology advantage :

1, scale advantage: Bailing machinery is largest

manufacturer of the river sand drying production machine,

sand drying machine, dryer, three return the in China at

present .

It has a professional production workshop and

production team , can fully guarantee the quality of

equipment.

2 , Technology advantages: Bailing Machinery has the first

Innovation Engineer in river sand drying machine.

Leading by

the engineer' s production team keep the new technology to

the equipment production, continuously improve the drying

efficiency, reduce production cost.

3 service advantage: Bailing machinery has gone through 26

years in the manufacturing of drying machine.

Every business

is hold on the customer responsible attitude, so that every

customer can buy rest assured products.

4 Materials advantage: in the river sand drying machine

manufacturing process, Bailing machinery choose the high

quality machine equipment manufacturers.

we are cautious in

the process of purchasing parts, ensure the parts service

life, reduce the customer' s production cost.

5 .

Guaranteed capacity : at present a lot of river sand

drying machine manufacturer, just put a model of river sand

drying machine to zoom in and out as river sand drying

machine big size or small size, simply can not achieve the

requirements of production.

Bailing sand drying machine

models include HAS623, HAS625, HAS628, HAS6210 .

Different

types has different capacity , in the range of 3- 15 tons /

hour, fully meet customer demand for production.

Company Contact:

• Posted By: Henan Bailing Machinery Co., Ltd.

• Phone: 008637167996061

• Address: 3rd, 79th Kexue Road, hi-tech zone of Zheng, Zhengzhou , China

• Email:

• Website: https://www.bailingmachinery.com

• Business Description: Henan Bailing Machinery Co., Ltd. is a modern enterprise specialized in
  
  manufacturing mining equipment which is integrated with research,
  
  production, and marketing of the mining equipments.
  
  The headquarter is
  
  located at the HI TECH industrial development zone in Zhengzhou,
  
  covering above 28 thousand square meters.
  
  For the time being, Bailing
  
  Machinery has passed the authoritative certificates such as ISO9001: 2008
  
  and CCC authentication(China Compulsory Product Certification).
  
  We are
  
  aslo honored as "contract abiding and trustworthy" enterprise of Henan
  
  province.
  
  And the enterprise has followed the scientific management
  
  method of modern enterprises, producing equipments with meticulous care
  
  and endless innovation, in this way, it has rapidly delevoped and become
  
  an outstanding enterprise in the mechanical industry in China.
  
  Henan Bailing Machinery Co., Ltd. is committed to designing, producing grinding mills, crushers, conveyors, feeding machines, drying and calcinating as well as beneficiation equipments and etc, which are widely applied in electricity, metallurgy, mine and quarry, wharf, granary, chemical industry.
  
  Our products have been spreaded all over China, and also exported to European, American, Asian, African countries and enjoyed great popularity among our customers.
  
  Our company owns an experienced and skilled sales and service team which compose a perfect service network.
  
  We will send the professional engineers to the installation sites and provide guidance for the installation, commissioning and initial run as well as planning administration of the equipments after purchase.
  
  All the staff are improving the study ability of whole team with full passion, fresh vitality, and diligency.
  
  We are striving to be the strong, professional, and best enterprise with "high quality, best service, good faith" and aim at being the first class mining equipment enterprise in domestic with advanced international standard.
  
  We warmly invite customers all over the world to visit our factory, guide our work, and cooperate with us.