Double Suction Water Pump - China

Brief introduction:

ZSS series axial split casing pump is a updated product which absorbed the advantages of same type pumps.

It is a replacing product of old S series and SH series double suction pump.

This updated product owns the features of better hydraulic performance, high efficiency, stable operation, smaller in size.

Parameters:

Flow rate: Q=50~6330m3/h

Total head: H=9~160m

Speed: n=980 rpm/2950rpm

S.

g: γ ≤1.15 Temperature: T=-0~105ºC

P ump diameter: 80~600mm

Features:

1 - Excellent energy-saving hydraulic models.

2 - Optimized hydraulic design, precisely casted impeller+casing+pump over and dynamic balanced impeller ensure the accurate performance of pump.

3 - Instead of traditional external circulation structure, a revolutionary design of sealing cooling and lubrication is adopted, which enables the complete internal circulation of cooling, lubrication and flushing.

4 - Internal sealing lubrication structure, the flushing to sealing system is more efficient.

5 - Straight line outline with stiffeners on pump cover, internal sealing lubrication structure, flexible structure design makes the pump more elegant.

Structure:

1 - Single stage, double suction, axial split casing centrifugal pump.

Double passage casing to reduce the axial forces.

2 - Both pump inlet and outlet are beneath the pump centerline, the rotary part can be removed from the casing without dismantle the pipelines.

3 - Shortened shaft and enlarged diameter of shaft design to increase the life of bearings and mechanical seals.

4 - Completely sealed shaft design, zero contact with fluids.

5 - Various materials of shaft sleeve to prevent the shaft from abrasion and corrosion.

6 - Both mechanical seal and packing seal are available;mechanical seal can be changed without dismantle the pump cover.

7 - Different rotation directions are available.

Application:

1 - It is suitable to pump clean water and fluids have close physical and chemical characters of water.

2 - Widely used in sections of mining, city water supply, power plant water supply and drainage, farm irrigation and various water conservancy project.

Company Contact:

• Posted By: Sichuan Zigong Pump & Valve Co., Ltd.

• Phone: 13738006567

• Address: No.56, Golden Hill Rd, Hi-Tech Industrial Zone, Yantan District, Zigong, Sichuan Province, Sichuan , Zigong , China

• Email:

• Website: https://www.zgpumpvalve.com/

• Business Description: Sichuan Zigong Pump & Valve Co., Ltd. shorted as Zigong Pump & Valve, is the biggest chemical pump manufacturer with full specifications in West China.
  
  It was formerly known as Zigong Pump Factory which was designated as the key manufacturer of slurry pumps and anti-corrosive pumps by the former Mechanical & Industrial Ministry of China.
  
  Now after decades' development, successfully Zigong Pump & Valve ranked itself as the essential company and is selected as the council member of Pump industrial branch of CGMA(China General Machinery Association)
  
  Located in National High-Tech Industrial Zone of Zigong City, with 160 million RMB registered capital(approximately 26 million US dollar), Zigong Pump & Valve covers an area of 96,700 ㎡which enable the annual capacity of around 10,000 pieces pumps in various series and sizes.
  
  The leading products of Zigong Pump & Valve covers four categories of slurry pumps, chemical pumps, water pumps and petrochemical pumps, including more than 600 specifications of 41 series.
  
  All the products are widely used in chemical, petrochemical, metallurgy, mining, textile, environment protection, electricity and public facilities, etc.
  
  As a High-Tech enterprise and a provincial level technical center, Zigong Pump & Valve built up a graduate workstation of fluid machinery and engineering with West China University.
  
  And by deeply working with famous design companies and universities, Zigong Pump & Valve is able to continuously focus on R & D, and provide customers optimized pump solutions.
  
  Also as the biggest chemical pump manufacturer in West China, Zigong Pump & Valve owns the most advanced pump testing center and other advanced facilities as CNC boring and milling machining center,5 meter and 3.5 meter CNC vertical lathe, resin-bonded sand process line of 20T/h, 3tAOD refining system,instant spectrum metal analyzer, etc.
  
  The mature management and strict quality control system enable Zigong Pump & Valve to pass the authentication of ISO9001: 2008, and to obtain the "National License of Industrial Products" and "Safety Certificate of Mining Machinery".
  
  Zigong Pump & Valve owns over 17 branch offices scatter among the key cities, forming the sales and after sales service network through out the whole country.