Aluminum Alloy Rapid Prototype Service - China

Customized aluminum alloy machining parts and aluminum alloy Rapid prototype service

CNC Machining and Manufacturing, Custom CNC Machining, CNC Manufacturing High Quality

If you need aluminum alloy machined parts and aluminum alloy rapid prototype, ZhuanXin Precision is one of the fully capable to complete your custom aluminum alloy products.

Aluminum alloy is the largest one among the metal materials we use, and we provide the corresponding surface treatment., save time and cost for customers, you can send 3D/CAD files directly to us

Aluminum alloy material is favored by most engineers because it has low density, light weight, easy processing, and good surface treatment effect.

It is suitable for various industries.

70% of the rapid prototype is aluminum alloy material.

Each grade has a different state, hardness, strength, corrosion resistance, processability, weldability, and decorative properties.

The selection should be based on the product's performance requirements, the use of the environment, processing and other factors.

ZhuanXin Precision has stocks of these commonly used materials to ensure that customers can shorten the delivery time when they need to process rapid prototype and machined parts.

Low Density The density of aluminum is 2171 g/cm3, which is about one third of the steel density (7187 g/cm3).

Hardness Many customers are very concerned about the hardness when ordering aluminum alloy machined parts and aluminum alloy hand model.

The hardness has a direct relationship with the chemical composition and state of the alloy.

The hardness of the aluminum alloy is ranked from high to low: 7 series, 2 series, 4 series, 6 series, 5 series, 3 series, 1 series.

Strength strength is an important factor that must be considered when designing a product.

In particular, when an aluminum alloy component is used as a structural component, an appropriate alloy should be selected according to the pressure applied.

The strength of pure aluminum is the lowest, and the strengths of heat-treated alloys of 2 and 7 series are the highest.

There is a certain positive correlation between hardness and strength.

The Corrosion Resistance Corrosion resistance includes chemical resistance, electrochemical corrosion resistance, and stress corrosion resistance.

In general, the corrosion resistance of 1 series pure aluminum is the best, 5 series is good, followed by 3 series and 6 series, 2 series and 7 series are poor, which can be judged, 1 series, 5 series, 3 series, 6 The anodizing effect is good, and the anodizing effect of the 2 and 7 series is poor.

Processing performance Aluminum alloy CNC machining, bending, stretching and other molding processability is very good, cutting performance and alloy composition have a great relationship, usually high strength aluminum alloy cutting performance is better.

Environmental protection Aluminum has a low melting point (660 °C) and is easy to recycle.

Conducive to environmental protection and in line with sustainable development strategies.

Aluminum alloy not only has great advantages in mechanical processing, but also has many options in surface treatment.

The surface treatment of aluminum alloy products can be: anodizing, dusting, painting, electroplating, passivation, polishing, drawing, spraying Sand, silk screen, laser engraving, electrophoresis, CD pattern, etching, corrosion pattern, epoxy, etc.

No matter what kind of personality design you have, we will be happy to provide you with customized services.

The aluminum alloy parts and aluminum alloy prototype produced by ZhuanXin Precision can be manufactured using a variety of different processing technologies, such as: CNC milling, CNC lathe machining, wire cutting, electric spark, laser cutting, CNC bending, punching, drilling, and tapping.

Teeth, braces and so on.

Company Contact:

• Posted By: Dongguan Zhuanxin Precision Hardware Co.,LTD

• Phone: +8676981553687

• Address: 11# Gangsha Road, Shagang, Chang’an Town, Dongguan City, Guangdong Province, China

• Email:

• Website: https://www.zx-cncmachining.com/

• Business Description: ZhuanXin Precision Chinese transliteration is, it means to keep promise, founded by Mr.
  
  Kelvin Yang, Since 2005, he has been training students with CAM/CAD and other engineering software.
  
  He hopes to provide talent output for China's CNC engineering technology.
  
  Considering the combination of theory and practice, Mr.
  
  Yang began to introduce CNC processing equipment and machining equipment in 2006 - Students have more room for development in CNC engineering technology, and provide rapid prototype and CNC custom parts processing services for designers and engineers.
  
  Our professional technology and service, as well as the cost advantage of the Chinese market, we have helped many engineers and designers to quickly produce from low-volume creative---rapid prototype, which makes many customers take the lead in opening up the market and getting many customers.
  
  Affirmation, as the market demand is getting bigger and bigger, ZhuanXin Precision has added advanced quality testing equipment and passed ISO9001: 2015 quality certification in order to further provide customers high quality products.