Ion Exchanger - China

Full-Automatic Ion Exchanger Overview Full-automatic ion exchanger is a

brand new environmental-friendly, economical and safe soft water

treatment system, developed based on successful engineering practical

experience, in accordance with national and industrial standards.

Resin

tank of the full-automatic ion exchanger is made from top-grade glass

steel, stainless steel, carbon steel-lined plastics, and other

antiseptic materials.

With superior quality and stable and reliable

performance, the equipment realizes full automatic operation, requires

no special attendance, and has high cost performance and satisfactory

effect.

This system can be applied to boilers, air conditioning, and

refrigeration systems in petrochemical industry, light and textile

industry, food sanitation, and hotels, etc.

Working Principle Water

hardness is mainly contributed by calcium (Ca2+) and magnesium (Mg2+)

ions.

When hard raw water flows through the resin layer of an ion

exchanger, calcium and magnesium ions therein will be absorbed by the

resin; and meanwhile, sodium ions will be released.

In this way,

hardness ions are removed and the water flowing out of the exchanger is

soft water.

When the resin is saturated with calcium and magnesium ions,

outlet water hardness will increase.

In this circumstance, water

softener will start to regenerate the resin automatically according to

the preset program.

High-concentration sodium chloride solution (salt

solution) will pass through the resin, so that the ineffective resin

will be restored to the sodium form.

Equipment Characteristics

1 - High degree of automation; stable operating conditions;

2 - Advanced program control ensures accurate and reliable operation; manual operation is replaced; full automatic operation of water treatment is realized.

3 - High efficiency, low power consumption, and low running cost; the reasonable design of water softener brings into full play the absorbing capacity of resin.

Jet self-suction pump is used as a substitute for salt pump, which reduces energy consumption.



4 - The equipment is compact in structure, requires small floor space and low investment in basic construction, and is easy to install, debug and operate; with steady performance.

Water Intake Requirements

Residual chlorine< 0.1ppm Turbidity< 2 Fe<03ppm

Mn < 0.3ppm Total salt content < 500 ppm

Main Points of Construction and Installation

1).

A support shall be provided for the pipeline to prevent stress on the control valve.

2).

When the water inlet pipe of the softener is connected with the domestic water pipeline, a backflow preventer shall be installed on the inlet pipe.

3).

When the inlet water pressure is lower than 0.15MPa, pressure application measures shall be taken.

4).

The drain pipe length shall be less than 6m, with no valves thereon; the outlet shall not be higher than the valve body; the drain pipe shall be open ended, for fear of syphonage.

5).

There shall be a 220V power supply at the operation site, apart from the softener with a water power multiple unit valve.

6).

Iodized salt cannot be used; calcium-added salt shall be used as regenerant.

Technical Parameters

2 - Water Intake Requirements

Raw water hardness: in conformity with 'Specification for Automatic Sodium Ion Exchanger (GB/T 18300-2001)'

Inlet water turbidity: <10mg/L;

Inlet free chlorine: ≤0.3mg/L;

Inlet suspended substance: <5mg/L;

Inlet iron content: <0.3mg/L;

Inlet water pressure: 0.2-0.6 MPa;

Inlet water temperature: 5-45 degreesC

3 - Operating Parameters

Resin Model: 001×7 strong acid cation exchange resin;

Working power supply: 220V±22V/50HZ:

Regeneration mode and control: cocurrent flow dynamic regeneration; time control, flow control, and detection control

Connection type: thread or ABS flange

Ion Exchanger

Please see our contact information below

Company Contact:

• Posted By: China Qilian Power Equipment Co., Ltd

• Phone: 8651583062789

• Address: No.23Yanma Road, yancheng , China

• Email:

• Website: http://en.jsycql.com

• Business Description: involved in international trade import export of goods, products, and services