Truck Mounted Water Well Drilling Rig Spc300 St - China

SPC300-ST Truck Mounted Water Well Drilling Rig

Brief Introduction

1 SPC-300ST truck mounted water well drilling rig is a vehicle-mounted rotary drilling rig.

2 SPC-300ST truck mounted water well drilling rig is installed 'STEYR' full-wheel automobile chassis as its driving force.

3 SPC-300ST truck mounted water well drilling rig is equipped with separated diesel engine which helps enhance the rig's driving characteristics.

4 The main drilling process of SPC-300ST truck mounted water well drilling rig is rotary plate and slurry Positive cycle.

5 SPC-300ST truck mounted water well drilling rig is of strong adaptability, could drill in clay, sand, gravel and pebble, float stone stratum and bedrock.

6 If with proper tools, SPC-300ST truck mounted water well drilling rig can be used for other drilling technologies.

7 The main transmission of SPC-300ST truck mounted water well drilling rig is a mechanical one and the control mechanism is hydraulic mechanical.

8 SPC-300ST truck mounted water well drilling rig is featured with: good mobility, high integrity, convenient in operation, reliable transmission, wide application and high efficiency.

9 For rotary drilling, mud is used as flushing fluid (positive cycle).

Moreover, the two—arms drilling tool is equipped as air lifting reverse cycle; The shallow—bore hammer tool, air compressor and speed reducer of increasing rotary table are equipped as foam drilling, Auger tool is equipped as Auger drilling 10 At the beginning of boring, pressuring mechanism may be used for drill tool to effect pressuring drilling, thus promoting the efficiency of shallow hole drilling.

With the increased depth, when the weight of the drill tool is greater than the pressure required to apply to the drill tool, the main hoisting system should be used to carry out reduced—pressure drilling.

SPC-300ST truck mounted water well drilling rig is provided with one main hoist and tow secondary hoists.

The main hoist is used for lifting or lowering of the drill tool, lowering of the well pipe, reduced-pressure drilling and percussive drilling.

One of the secondary hoists is used for driving percussive earth excavator or other coring tool and sand reel to extract sand sample or core and silt in the well.

The other secondary hoist is used for elevating the movable table.

SPC-300ST truck mounted water well drilling rig is equipped four jacks to reduce physical labor and improve install efficiency.

SPC-300ST truck mounted water well drilling rig isn’t used the truck engine.

It is separately equipped diesel engine (The buyer can choose model 6135AN or F6L912 or BF6L913 etc diesel engine).

Main Applications

SPC-300ST truck mounted water well drilling rig features in best maneuver ability, compact construction, high integrity, economical transportation, and simple operation, reliable transmission, high versatility and efficiency.

After loosening the first turn of thread of the lock joint with the aid of breakout-gun cylinder, the drill pipe can be rotated in clockwise or counter-clockwise direction by the rotary table to reduce greatly the labor intensity and prolong service life of the component parts.



In order to improve efficiency of drilling, SPC-300ST truck mounted water well drilling rig is equipped with related drilling tool that can be applied various advanced drilling technology.

SPC-300ST truck mounted water well drilling rig may be used for drilling in quaternary period stratum and matrix water well.

Rotary drilling can be made right with a depth of 300m.

And bore diameter of 500mm.

http: //www.

sino-drillrig.

com/

http: //www.

sino-drillrig.

com/Water well drilling rig

http: //www.

sino-drillrig.

com/products/trailer-mounted-water-well-drilling-rig

http: //www.

sino-drillrig.

com/products/truck-mounted-water-well-drilling-rig

http: //www.

sino-drillrig.

com/products/small-water-well-drilling-rig

http: //www.

sino-drillrig.

com/water well drilling rigs for sale

http: //www.

sino-drillrig.

com/Drilling rig for water well

http: //www.

sino-drillrig.

com/Water well drilling rig manufacturer

Company Contact:

• Posted By: Zhengzhou Sinosun Machinery Co., Ltd.

• Phone: 18612345678

• Address: Industrial Zone, Dongfeng Road, zhengzhou , China

• Email:

• Website: http://www.sino-drillrig.com

• Business Description: SINOSUN is one of China s dominant manufacturers and exporters of
  
  precisioned Asphalt Machines and Plants.
  
  An asphalt plant is a plant used for the manufacture of asphalt, macadam and other forms of coated road stone.
  
  www.
  
  sinoasphaltpl ant.
  
  com