Tricycle Powder Coating Line Equipment Plant - China

Drying curing furnace is mainly a baking curing temperature environment for coating, hot air circulate in the oven heating, high thermal efficiency, furnace temperature equilibrium, to save energy.

Heat source can use electricity, coal, oil, gas, choice of biological particles and so on widely.

Oven insulation layer USES the aluminum silicate cotton or rock wool, the mechanism of forming, assembled on plate shape; Oven structure tightly, solid and durable, good insulation sealing; Heating up fast, small temperature difference, energy-saving effect is remarkable; Scope of its temperature, holding time, heating speed, automatic protection can be arbitrarily set program; With simple operation, stable operation, fully automatic control, without the personnel unattended; Widely used in the drying and curing of all kinds of products.

Commonly used heating mode and features:

: 1, the electricity heating equipment cost low, use cost is high, no pollution.

: 2, fuel heating equipment cost slightly higher, use cost, slightly polluted.

: 3, coal-fired heating equipment cost is low, use cost low, pollution is serious.

: 4, particle heating equipment cost is high, the cost is low, there is pollution.

: 5, gas heating equipment cost in general, the use of lower cost, no pollution.

Professional Design For Free

Professional Scheme For Free

Professional Installation For Free The powder sprayed from the spray gun, the part which is not adhesion on the workpiece is brought to the inside of the large cyclone by the airflow that generated by the exhaust fan, the larger powder is be separated in the separator and drop on the vibrating screen, shake the sieve through the vibration motor, then the powder which has been removed impurities is dropped into the powder recovery group.

Return to the powder box through the powder recovery pump and the powder supplying tube, then be reused.

Effectively reduces the waste of powder.

The powder that has not been separated from the large cyclone is sucked into the secondary recovery, the filter element in the secondary recovery separates the remaining powder from the air, then the purified air is discharged to the inside of the workshop.

The filter element will be cleaned with compressed air for a period of time via the rotate wing and the powder will be blown into the powder collecting bucket.

Company Contact:

• Posted By: Hebei Hanna Technology Co.,Ltd

• Phone: +8618633045156

• Address: Zhongshan Road, Shijiazhuang City, Hebei Province, China

• Email:

• Website: https://www.coating-equipment.com/

• Business Description: Hebei Hanna Technology Co., Ltd, China largest powder coating equipment factory，since 1990 .
  
  From simple manual spraying to automatic powder spraying system.
  
  Has through CE &ISO9001 standards.
  
  We are specialized in the development, Design -- production -- installation -- after-sales service for powder coating line.