New Machine Made Charcoal Briquette Equipment - China

Shuliy's new machine-made charcoal briquette equipment is fully compliant with the production standards, so in the case of other factors are qualified, it will inevitably produce high quality good charcoal.

However, the quality of raw materials also plays a certain role in whether it can produce high-quality charcoal.

Because of the composition of the raw materials, there are two factors that determine the quality of the carbon, that is, the amount of raw material lignin and the composition of the fiber.

The former determines the carbon content of the finished product, while the former directly affects the density and strength of the finished product.

This shows the importance of the two contents of raw materials.

In addition to the above two points, in addition, the size of the raw materials on the machine-made charcoal produced by the new machine-made charcoal briquette equipment should also be considered.

Excessively large raw materials need to be crushed before they can be used, such as wood shavings.

Raw materials with too small volume need to be mixed with raw materials with a slightly larger particle size and higher density, such as hibiscus, sanding powder, etc.

Since these raw materials are very fluffy and light in weight, it is difficult to automatically fall into the molding zone, so it is necessary to mix Other raw materials are produced together.

The standard for measuring the volume of raw materials is to see if they can continue into the forming zone continuously, evenly and sufficiently.

The indicator light of the power supply is not bright.

It may be that the power of the new machine-made charcoal briquette equipment is not connected, or the fuse of the equipment may be blown.

It may also be the indicator of the new machine-made charcoal briquette equipment.

There was damage.

If the above three situations occur, you can judge according to the situation at the time and make corresponding repairs.

If the motor does not start normally, there may be damage to the control button of the new machine-made charcoal briquette equipment.

It may also be that the three-phase power is connected to the two-phase power, or the local voltage frequency may not be Meets the needs of the new machine-made charcoal briquette equipment.

When the above faults occur in the equipment, it is necessary to make corresponding repairs as soon as possible.

The situation that shuliy's new machine-made charcoal briquette equipment is likely to occur is the temperature of about four hundred tons that is required for production, which cannot be achieved anyway.

When this happens, there are only three aspects that we can consider, such as the power supply voltage used by the device is too low, or the resistance heating coil of the device is damaged, or the heating coil wire that you replaced the device.

However, the selected model does not match the wire.

In these cases, it is possible that the heating temperature will not be reached.

In this case, you need to make judgments and repairs according to the situation at the time.

Company Contact:

• Posted By: Zhengzhou Shuliy Machinery Co., Ltd

• Phone: 086 17303831295

• Address: 56 Ninth Street, zhengzhou , 河南 , China

• Email:

• Website: https://www.charcoal-machines.com

• Business Description: Mainly export some agricultural machinery and environmentally friendly machinery。Zhengzhou Shuliy Machinery Co., Ltd is a well-known enterprise that integrates scientific research, development, design, manufacturing and sales as a whole.
  
  It is located in Zhengzhou Economic and Technological Development Zone, which is a commercial and economic center, mainly engaging in the import and export of mechanical equipment .
  
  Here is empowered with more than 300 employees all motivated with the joy of working as a family.