Horizontal Thermal Shock Test Chamber - China

Application

JOEO thermal chamber, thermal test chambers are used in all industries such as automotive, electronics, aerospace, communication equipment, medical equipment, etc., to help find product defects in electronic components and product assembly.

Meet Standards IEC 60068-2-14 Nc - Rapid change of temperature, two-fluid-bath method

MIL-STD-883J Method 1011.9 - Military standard, test methods for microcircuits Thermal Shock

MIL-STD-202 Method 107 - Military standard, test methods for electronic and electrical component parts Thermal Shock

JESD22-A106B - Thermal Shock

IEC 60749-11 - Semiconductor devices, Mechanical and climatic test methods Part 11: Rapid change of temperature, Two-fluid-bath method

EIAJ ED-4701/307 - Environmental and endurance test methods for semiconductor devices Thermal Shock

Description

JOEO horizontal thermal shock test chamber, horizontal thermal shock machine, thermal cycling chambers, thermal cycle test chamber are ideal for batch testing and larger test loads.

The chamber is designed for custom environmental stress screening of components and board level electronic components.

The carrier basket transfers the load between the hot and cold zones in a two - or three-zone configuration.

In the horizontal three zones, the product moves through the carrying basket between the cold zone and the environmental zone, and the hot zone moves to surround the carrying basket.

A dual-effect thermal test systems (DTS) consists of three zones: a hot chamber at each end and a cold chamber in the middle.

This design allows products to be moved between areas simultaneously through two product baskets - exposing twice as much product in one system to maximize your investment.

Feature The reference test load of the JOEO temperature shock chamber is composed of 12 steel plates.

Each pound of steel has an exposed surface area of 65 square inches.

The test load is oriented in the product carrier, with the airflow parallel to the steel plate.

The load is distributed between two product carriers.

The weight of any additional racks must be included in the test load shown above.

The capacity depends on the stability of the product at extreme temperatures before transfer.

Do not use environment dwell time.

When assisted by liquid nitrogen, smaller mechanical refrigeration systems will maintain low temperatures.

Liquid nitrogen is required to meet the recovery time.

For a liquid nitrogen only thermal chambers, the maximum load is liquid nitrogen cooling without mechanical cooling.

Use IC chip product loading to recover 9 point products in 15 minutes or less.

The load is distributed between two product carriers.

Company Contact:

• Posted By: Guangdong ALI Testing Equipment Co,.Ltd

• Phone: 86076985914911

• Address: No. 2, Shajiao Four Gate, Humen Town, Dongguan, Guangdong, Dongguan , Guangdong , China

• Email:

• Website: https://www.chamber-testing.com/

• Business Description: ALI Testing takes pride in offering a wide range of cutting-edge products, including climatic test chamber and vibration test system.
  
  These high-end devices are essential for evaluating the quality and reliability of industrial products, as they accurately simulate climatic, temperature, humidity, vibrations, shocks, drops , other mechanical and comprehensive environments.
  
  The products find extensive application in sectors such as automotive, electronics, telecommunications, rail transportation, aerospace, and shipbuilding.