Smt Large Size Hot Air Lead Free Reflow Oven Eta S10 - China

ETA E10 Lead free hot air reflow oven

Heating System

> Ten groups of top and bottom forced hot air convection heating zones.

> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.

> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.

> Power consumption savings of 1/3 as compared to other systems.

> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.

> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.

> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.

Cooling System

> Two (2) groups of forced air convection cooling zones.

Distortion-free Conveyor System with Automated Chain Lubrication

> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support.

)

> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.

> Automated chain lubrication system with a computer controlled central reservoir.

Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.

Fresh Air Recharge System

> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.

Flux Management System

> Air amplifier forces supercharged flux collection and recirculation.

> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.

Control System

> PC control system with windows based control software.

Additional Features

> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.

> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.

> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.

> Swing arm control PC station

> Four (4) emergency stop switches

> Two (2) exhaust ports

> SMEMA interface

> System documentation

Specifications : E10(10-Zone)

General

Outside Dimension(L*W*H) : 6100x1350x1490mm

Standard Color : Computer Grey

Weight : Approx.

2350KG

Number Of Heating Zones : Up10/Bottom10

Length Of Heating Zones : 3200mm

Exhaust Volume : 10M3/minx2 Exhausts

Standard Feature Of Control System

Electric Supply Required : 3phase, 380V 50/60Hz

Power For Warm : Up35KW

Power Consumption : 12KW

Warming Time : Approx.

20 minute

Temp.

Setting Range : Room Temp.

- 300℃

Temperature Control Method : PID Close Loop Control + SSR Driving

Temperature Control Precision : ± 1.0℃

Temperature Deviation on PCB : ± 1.5℃ (by MR Board Test Standard)

Heating Element : Especial Heating elements For Long Life ;

Commutated Element : Aluminium Alloy Plate

Max.

Temp.

Gap Between Preheat & Reflow Setting : 80℃

Max.

Temp.

Gap Between Preheat Zones Setting : 40℃

Max.

Temp.

Gap Between Reflow Zones Setting : 50℃

Data Storage : Process Data and Status Storage

Abnormal Alarm : Abnormal Temperature (Extra-high / Extra-low Temp.

)

Board Dropped Alarm : Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal

Features Of Conveyor System

Rail Number : 1 Lane

Max.

Width Of PCB : 320mm (Option: 610mm )

Components Clearance : Top/ Bottom Clearance of PCB is 25mm

Converyor Direction : L→R (Option: R→L)

Fixed Rail Side : Front Rail Fixed(Option: Rear Rail Fixed)

Transmission Agent : Air-Reflow = Chain + Mesh , N2-Reflow=Chain(Mesh is option)

Center Support (Option) : Preventing PCB warp such too wide and heavy component load

Converyor Height : 900+/-20mm

Converyor Speed Range : 300～2000mm/min

Lubrication Auto-Afflux : Standard

Temp.

Thermocouple Slot : Standard

Driven Top Hood Opening : Standard

On Line Editing : Standard

Cooling Method : Forced-Air (Standard), Water-Chiller (Option)

Model for Nitrogen Process

Power For Warm : Up40KW

Power Consumption : 15KW

Flux Management System : Flux Reclaimed and Filtration standard for N2Oven, easy clean-up.

N2 containment at Entry and Exit End : Standard

Flux Reclaim System : Standard

Nitrogen Flow Meter : Standard

Oxygen Analyser : Option

Nitrogen Consumption [Standard] : 400~1000PPM 20M3/H

Water Chiller : 3 HP ; External Stand-alone Type ; Powerful Cooling suit to Lead-Free Process Required

Skype: chinasmai, www.

etasmt.

com

Company Contact:

• Posted By: ETA Electronic Equipment Co., LTD.

• Phone: 8615986790076

• Address: No.3 road 3,yangyong industrial zone shapu village, shenzhen , China

• Email:

• Website: http://www.etasmt.com

• Business Description: smt, smt mounter, lead free reflow soldering, lead free reflow oven, wave
  
  soldering machine, reflow soldering, wave soldering, smt pick place
  
  achine, smt equipment, wave soldering machine, AOI, Three lacquer coating
  
  machine, smt chip mounter, stencil printer, LED glue machine, reflow
  
  oven, smt semi automatic printer, solder paste, smt turnkey
  
  solutions, Samsung chip mounter, juki chip mounter, yamaha chip
  
  mounter, Panasonic chip mounter, fuji chip mounter, solder reflow, pcb
  
  solders, pb free soldering, reflow furnace, smt mounter, smt shooter, LED
  
  equipment, LED machine, BGA rework station, solder paste, fluxes, Bar Solder,
  
  ETA Electronic equipment Co., LTD. was founded in 2000 - Now, we have more than 260 employees , more 80 Skillful employees are bachelor degree or above , over 8000M2 manufactory area , all sorts of processing equipment surpass 60 sets, and have a strong ability in research and development and manufacture in SMT.
  
  contact: , smtvivi888@gmail.
  
  com , SKYPE: chinasmtai, www.
  
  etasmt.
  
  com