Surface Roughness Tester Srt6200 - China

Model: SRT6200 FEATURES This instrument is compatible with four

standards of ISO, DIN, ANSI and JIS and is widely used in production

site to measure surface roughness of various machinery-processed

parts, calculate corresponding parameters according to selected

measuring conditions and clearly display all measurement parameters.

When measuring the roughness of a surface, the sensor is placed on the

surface and then uniformly slides along the surface by driving the

mechanism inside the tester.

The sensor gets the surface roughness by

the sharp built-in probe.

This roughness causes displacement of the

probe which results in change of inductive amount of induction coils

so as to generate analogue signal, which is in proportion to the

surface roughness at output end of phase-sensitive rectifier.

The

exclusive DSP processes and calculates and then outputs the

measurement results on LCD.

* Very easy to operate

* Multiple parameter measurement: Ra, Rz

* Highly sophisticated inductance sensor

* Built-in lithium ion rechargeable battery and control

circuit with high capacity

* Small in size, light in weight and easy to use

* Can communicate with PC computer for statistics,

printing and analysing by the optional cable and the

software for RS232C interface.

*Manual or automatic shut down.

The tester can be

switched off by pressing the Power key at any time.

On the other hand, the tester will power itself off

about 5 minutes after the last key operation.

SPECIFICATIONS

Display 4 digits, 10 mm LCD, with blue backlight

Parameters: Ra, Rz

Display Range

Ra: 0.05-10.00um/1.000-400.0u inch

Rz: 0.020-100.0um/0.780-4000u inch

Accuracy: Not more than 10%

Fluctuation of display value: Not more than 6%

Sensor :

Test Principle: Inductance type

Radius of Probe Pin: 10um

Material of Probe Pin: Diamond

Measurement Force of Probe: 16mN(1.6gf)

Probe Angle: 90°

Vertical Radius of Guiding Head: 48mm

Maximum driving stroke: 17.5mm/0.7inch

Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional

Evaluation length: 1~5 cut off optional

Driving speed:

sampling length = 0.25mm Vt=0.135mm/s

sampling length = 0.8mm Vt=0.5mm/s

sampling length = 2.5mm Vt=1mm/s

returning Vt=1mm/s

Resolution : 0.001μm if reading ＜10μm

0.01μm if 10μm≤reading&# 65308;100μm

0.1μm if reading ≥100μm

Power Li-ion battery: rechargeable

Operating conditions: Temp.

0-50℃

Humidity <80%

Size 140x57x48 mm (5.5x2.2x1.9 inch)

Weight: about 420 g

Attachment:

Standard Sensor RP-100

Groove Stylus SRP-110

curvature Probe SRP-120

Extension Rod SER-150

Mesurement Stand SRS-1

Standard Sample Plate SSP-180

Cable and Software for RS-232/USB)

Bluetooth interface

Surface Roughness Tester Srt6200

Thank you in advance for your consideration

Company Contact:

• Posted By: GUANGZOU LANDTEK INSTRUMENTS CO.LTD

• Phone: 8602081609116

• Address: Flat C,Kengkou Electronic Base,NO.9 Huaxi Rd. Fang, GUANGZHOU , China

• Email:

• Website: http://landteknet.com

• Business Description: GUANGZHOU LANDTEK INSTRUMENTS CO.
  
  LTD is one of leading professional manufacturers of meters and instruments in China.
  
  We have a team of dedication, high level education, cooperation and strong creativity.
  
  They always apply the advanced contemporary techniques and experience to their new products.
  
  The instruments are of both high quality and high ratio of performance to price so that products are salable to world wide market.
  
  Quality first and user uppermost are one of our claims.
  
  Landtek Instruments strive for best in quality and after sale service.
  
  Satisfying your needs are our wishes.