Portable Surface Roughness Tester Srt 6100 - China

Model: SRT6100

1 - FEATURES

This instrument is compatible with four standards of

ISO, DIN, ANSI and JIS and is widely used in production

site to measure surface roughness of various

machinery-processed parts, calculate corresponding

parameters according to selected measuring conditions

and clearly display all measurement parameters.

When measuring the roughness of a surface, the

sensor is placed on the surface and then uniformly

slides along the surface by driving the mechanism

inside the tester.

The sensor gets the surface roughness

by the sharp built-in probe.

This roughness causes

displacement of the probe which results in change of

inductive amount of induction coils so as to generate

analogue signal, which is in proportion to the surface

roughness at output end of phase-sensitive rectifier.

The exclusive DSP processes and calculates and then

outputs the measurement results on LCD.

* Very easy to operate

* Multiple parameter measurement: Ra, Rz

* Highly sophisticated inductance sensor

* Built-in lithium ion rechargeable battery and control

circuit with high capacity

* Small in size, light in weight and easy to use

* Can communicate with PC computer for statistics,

printing and analysing by the optional cable and the

software for RS232C interface.

*Manual or automatic shut down.

The tester can be

switched off by pressing the Power key at any time.

On the other hand, the tester will power itself off

about 5 minutes after the last key operation.

2．SPECIFICATION S

Display: 4 digits, 10 mm LCD, with blue backlight

Parameters: Ra, Rz

Display Range

Ra: 0.05-10.00um/1.000-400.0u inch

Rz: 0.020-100.0um/0.780-4000u inch

Accuracy: Not more than 10%

Fluctuation of display value: Not more than 6%

Sensor :

Test Principle: Inductance type

Radius of Probe Pin: 10um

Material of Probe Pin: Diamond

Measurement Force of Probe: 16mN(1.6gf)

Probe Angle: 90°

Vertical Radius of Guiding Head: 48mm

Maximum driving stroke: 17.5mm/0.7inch

Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional

Evaluation length: 1~5 cut off optional

Driving speed:

sampling length = 0.25mm Vt=0.135mm/s

sampling length = 0.8mm Vt=0.5mm/s

sampling length = 2.5mm Vt=1mm/s

returning Vt=1mm/s

Resolution : 0.001μm if reading ＜10μm

0.01μm if 10μm≤reading&# 65308;100μm

0.1μm if reading ≥100μm

Power Li-ion battery: rechargeable

Operating conditions: Temp.

0-50C

Humidity <80%

Size: 140×52×48mm(5.5 x2.2x1.9 inch)

Weight: about 280 g

Battery : 4×1.5V AA (UM-3)battery

Attachment:

Standard Sensor RP-100

Standard Sample Plate SSP-180

Cable and Software for RS-232/USB)

Bluetooth interfac

Company Contact:

• Posted By: guangzhou landtek isntruments

• Phone: 8602081609116

• Address: Flat C,Kengkou Electronic Base,No.9 Huaxi Rd., guangzhou , China

• Email:

• Website: https://www.landteknet.com

• Business Description: GuangzhouLandtekInstrumen ts Co.
  
  Ltd. is one of leading professional
  
  manufacture rs of meters and instruments in China.
  
  They have a team of
  
  dedication, high level education, cooperation and strong creativity.
  
  They
  
  always apply the advanced contemporary techniques and experience to
  
  their new products.
  
  Our instruments are of both high quality and high
  
  ratio of performance to price so that products are salable to world
  
  wide market.
  
  Quality first and user uppermost are one of our claims.
  
  Our Instruments strive for best in quality and after sale service.
  
  Satisfying your needs are our wishes.