160w Folding Solar Panel Cell Module - China

Specification:

Solar panel type: Monocrystalline Wattage: 160W

Voltage: 13.4-14.03V

Open circuit voltage: 22.4V

Peak current output: 8.75A

Regulator type: PWM (Pulse-Width Modulator) Dimensions: 770*670*65mm

Extension lead: 5m

Solar regulator IP Rating: IP68 Note: all prices are excluding tax and shipping.

All parameters may differ between ±3%—±5%.

The price is for FOB Zhongshan Port and the offer is valid for 15 days.

Warranty for two years.

Features:

1 - Highly efficient monocrystalline modules in the solar panel guarantee efficient charging.

2 - When the 160W folding solar panel is folded up, it’s space-saving and portable; when the folding solar kit is open, it has double the sunlight charging area, providing a good consistent charge.

3 - The regulator is designed to protect the battery from overcharging under voltage, as well as short circuiting.

4 - Specially designed support legs enable the160W folding solar panel to stand on rough surfaces, and on a desired angle for direct sun exposure.

USING YOUR 160W FOLDING SOLAR PANEL: The Adventure Kings 160W folding solar panel will perform at its peak when the solar panel face/monocrystalline cells are angled directly towards the sun.

Set the legs to your desired position: (below) TWO STEPS FOR USING THIS ADJUSTABLE SUPPORT LEG 

1 - When the locking handle is at 90 degrees a right angle.

The support legs are loose and the angle of the solar panel can be adjusted.

2 - When the locking handle is in the down (45 degree) position, the support legs are locked and cannot move or shake at all.

CONNECTING YOUR SOLAR PANEL 1 - Now that the panel is setup facing directly towards the sun.

Proceed to connect the positive and negative clamps to your battery.

2 - DO NOT connect the solar panel straight to the battery or it will damage the Solar controller.

3 - Always connect the battery clamps to the battery first, then plug the solar panel Anderson plug into the battery cables Anderson plug.

Your regulator will then light up to show that it is working.

DISCONNECTING AND STORING YOUR SOLAR PANEL 

1 - Disconnect the Anderson plug off the battery clips first and then proceed to take the battery clips off the battery.

2 - Roll the extension lead up neatly into the storage clips behind the Solar panel.

NOTE: MAKE SURE NOT TO TWIST OR KINK THE WIRING IN AN UNNATURAL WAY.

3 - NEVER STORE YOUR SOLAR PANEL WITH THE BATTERY LEADS CONNECTED TO THE PANEL.

4 - PLACE THE BATTERY LEADS SEPERATELY IN THE FRONT POCKET OF THE CARRY BAG.

TIP: For optimal performance through-out the day, set the panel to approximately 30° from the ground.

Anywhere between 10° and 40° will gain the best power absorption across the course of the day.

Company Contact:

• Posted By: Guangdong Jiuzhou Solar Energy Science&Technology Co., Ltd.

• Phone: 13427022198

• Address: No.9,Xingye Road, Zhongshan , Guangdong , China

• Email:

• Website: http://en.jiuzhousolar.com

• Business Description: Guangdong Jiuzhou Solar Energy Science & Technology Co., Ltd. is a high-tech enterprise specializing in the integration of R & D, production, sales and after-sales service of solar PV application system.
  
  The main products are solar PV power system, green electricity storage generator, solar LED street light, lithium-ion battery pack for energy storage, intelligent PV power supply system, all of which have been widely used in municipal transportation, new rural construction, coast defence, remote areas, tourism, navigation and other fields.