Steel Case Zr 80we Co2 Laser Power Supply - China

ZR-80W LASER POWER SOURCES

Feature:

1 - The 80W laser power supplies have good compatibility : The air cooling laser power supplies can work with most brand 1250mm, 1400mm or 1450mm 80W or 90W glass laser tube, besides this feature, the network port laser power supplies also have strong adaptability and fast response, engraving or cutting benefits good effect.

2 - The laser power control is simple, the network port laser power supplies can use 0-5V analog signal to control the laser power.

Also the 80W laser power supplies can also use the PWM (pulse width modulation) signal for laser power control.

3 - The air cooling laser power supplies have good protection function: The network port laser power supplies have open circuit protection to make the 80W laser power supplies to short-term work in the open state, so as to make it avoid the laser tube broken.

4 - This 80W laser power supplies has simple control which selects high and low level for laser power control.

The use of TTL-level control can realize start and stop.

At the same time the air cooling laser power supplies add a protection switch, testing is made by external water and ventilation.

5 - This 80W laser power supplies have stable laser output performance: Each air cooling power supplies have been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each network port laser power supplies.

6 - The ZR-80W laser power supplies uses ordinary H/L/P/G/IN/5V as laser control signal.

And it uses aluminum top cover and galvanized plate bottom case Specification

lnput Input voltage AC220V±10% (AC110V specified while order) AC frequency 47~440HZ Maximum input power 750W Maximum input current 3.4A

Output Maximum output voltage 32KV Maximum output current 33mA

(depending on the laser tubes of different manufacturers)

Efficiency More than 90% (Full load)

Response speed Not more than 1ms

Control lnterace TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)

Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection

Open Circuit Protection Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)

Environmental Requested Working temperature -10℃~50℃ Storage of temperature -20℃~75℃ Relative Humidity Maximum 85%RH (non-condensing) Altitude 100, 000 feet of work

200, 000 feet of storage, dose not work

Cooling methods Forced air cooling (fan cooling)

Dimensions (LxWxH) 283mmx178mmx106mm

Company Contact:

• Posted By: Jinan Ruby Laser Technology Co.,Ltd

• Phone: 13295411923

• Address: 8510 Room.Huiju Building.intersection of West Second Ring Road and Meili Road,Tianqiao District, Jinan , Shandong , China

• Email:

• Website: http://www.rlaserpowersupply.com

• Business Description: Jinan Ruby Laser Technology Co.,Ltd is main laser power supply manufacturer which was established at 2007 - From then on ,she has more than 17 years experience to research & develop, produce and sell ZRSUNS brand CO2 laser power supply and other laser cutting or engraving machine accessories.
  
  At present, our CO2 power supply has three series products(ZR series,BR series and DY series).
  
  ZR/BR series laser power supplies are used for ordinary CO2 laser tube and DY series CO2 power supply is specially for RECI brand CO2 laser tube.
  
  Based on client’s using feedback and’ innovation in electronic technology,the company developed LCD screen display laser power supply.
  
  Now ZRSUNS products covers 40W/50W/60W/80W/100W/150W /200W CO2 laser power supplies.
  
  Since its establishment,Jinan Ruby Laser Technology Co., Ltd attaches great importance to the quality of laser power supply to establish ZRSUNS brand’s good reputation in domestic and foreign markets In order to realize this goal, it has an experienced management team and skilled technical workers.
  
  And all accessories are purchased from United States, Japan,France, Taiwan and China’s well-known companies, some electronic components have UL,CE,CCC,TUV,SA certification.
  
  The laser power supplies are also produced accordance with the requirements of ISO9001 quality system.
  
  At present, all CO2 laser power sources have obtained CE certification, and they are used by the main laser engraving machine, laser cutting machine and laser marking machine manufacturers.
  
  Excellent quality, reasonable price and professional pre-sale and after-sales service team make ZRSUNS power supply become one of three great power supply manufacturers in China.
  
  ZRSUNS CO2 power source’s feature,specification and wiring connection method are completely same with each other, which can replace these two brands power supplies.
  
  Now Jinan Ruby Laser Technology Co., Ltd 's laser power supply have occupied about 40% of the Chinese market.
  
  Jinan Ruby Laser Technology Co., Ltd has 25 skilled technical workers, which can finish large quantity purchase orders in very short time with good quality.
  
  The company also has 4 chief engineers which make sure the company can customize the power supply on clients’ special requirement.
  
  esides standard laser power supply, ZRSUNS can also provide OEM services which can meet different clients special requirement in business.
  
  Now Jinan Ruby Laser Technology Co., Ltd hopes to establish good business relationship