Fb Ksc Coriolis Mass Flow Meter - China

Brief Introduction:

FB-KSC Coriolis Mass Flow Feeder System is developed by our company according to the principle of Coriolis.

It is complete measuring equipment for continuous feeding and measuring powdery material.

It is mainly used in coal feeding for kiln head and kiln tail of cement plant and measurement for mixture of fly ash in cement grinding plant, of course, the different technology stage have different measurement system.

For fly ash, measurement by combining the unidirectional screw gate valve + steady flow feeder + Coriolis powdery flowmeter

For pulverized coal, measurement by combining the unidirectional screw gate valve + steady flow feeder + Coriolis powdery flowmeter + electric and pneumatic control valve

Structure:

1 - All bearings inside the feeder are imported and the motor and reducer are the products of SEW company;

2 - Steady flow feeder is mainly used for steady the material flow with structure of three-layer and mixing device to prevent material arching and flushing in the silo and material rocketing out caused by air pressure, the steady flow feeder can make the feeding well-distributed, steady and reliable;

3 - The system is inspected by Coriolis principle.

The instantaneous mass flow of the material is measured.

It is the real flow meter different from the chute-type flow meter and impact flow meter and also different from loss-in-weight feeder, rotor weighfeeder and ring-typed balance;

4 - Steady and accuracy feeding is realized by adopting frequency control of motor speed to ensure high accuracy and quick responses;

5 - As a pre-feeding device, steady flow feeder is mainly used in powdery weighing system which requires a certain conveying pressure and higher weighing accuracy (eg.

kiln head and kiln tail of cement plant for coal feeding);

6 - The pre-feeding instrument can also be rotary vane feeder + electronic flow control valve + air chute in normal pressure.

The cost of this system is slightly low and is widely used in fly ash weighing and conveying;

Working principle:

The Core part for Coriolis mass flow meter is measuring disc, which is drived by the main axes.

The material is flow into the central measuring disc, and then threw out by revolving disc.

The material will give a force to the vane of the disc, the force is called Coriolis force, the force is proportional to the material of the mass, the material flow rate will be got after measuring the force.

In Coriolis mass flow meter, the measured force is torques which caused by the driving axes on measuring disc.

Due to the radius of disc is fixed, the Coriolis force will be calculated when measuring the torques, at the same time, the material instantaneous flow rate also can be got indirectly.

There is no influence on the measurement result for friction between material particles and measuring disc, as well as the friction among the material layer caused by different speed, to ensure the precision of the system.

Function Characteristics:

1 - The system adopts the following structure: EB-DAC5000 control system, namely PLC+touch screen or intelligent instrument.

2 - It is a set of system that can realize continuous feeding and weighing.

3 - Reasonable structure, convenient maintenance and reliable operation.

4 - Automatically measure system zero and calculate calibration factor.

5 - Friendly touch screen operating interference makes the operation simple, and the control process and system statue can be displayed on-line.

6 - Special parameter table is set to make the system operate in best conditions, and the centralized and local switching can be realized in screen.

7 - The system has the display function of shift accumulation, daily accumulation and total accumulation.

8 - Torque detection adopts customized dynamic torque sensor

9 - The system has the function of self-diagnosis and can be connected to DSC system.

10 - The system adopts integrated framework, vertically fix dynamic torque sensor, assemble precision, stable running.

Parameter:

Weighing Range: 3~160M3 / h

Weighing Accuracy: ±0.5%

Company Contact:

• Posted By: Henan Fengbo Automation

• Phone: 8637156981134

• Address: High-Tech Industrial Park, Economic and Technologi, Zhengzhou , China

• Email:

• Business Description: Henan Fengbo Group was established in 1997, it is located in Henan province, which is one of the biggest auto machine producing area in China.
  
  To be the pioneer of the industrial automation supplier, Fengbo not only owns its design, manufacturing room, it also owns the first dynamic metrology institutes and dynamic measurement network in China, as well as the experiment device for continuous measures of solid granular materials and leading measure experiment device for powder continuous measurement.
  
  Since the company was founded, it has devoted itself to providing comprehensive solution in industrial production, infrastructure, energy saving.
  
  It manufactures FB IWFL/M Informatization Weigh Feeder, FB DRFS Fengbo Rotor Weighfeeder, FB CWLF Continuous Loss in Weight Feeder, FB CMF Coriolis Powdery Feeder System, FB WFL/M/S Weigh Feeder, FB S/DHM Screw Feeder, FB BMP Dual idler Electronic Belt Scale and Large scale DCS Automatic Systems , which refer to cement industry , building materials industry, chemical industry, metallurgy industry, electric power industry, coal industry, food and beverage industry, etc.
  
  With more than 14 years experience in researching and producing, by means of strict quality control and efficient management, our company passed ISO9001: 2000 and ISO9001: 2008 and low voltage complete 3C certificate, and also applied for more than 20 national patents.
  
  we are able to offer high quality products, one stop service, prompt delivery and attractive price to customers.
  
  We warmly invite clients from all over the world to contact or visit us in order to discover for themselves that Henan Fengbo is the best choice.