Very Cheap Solar Film Building Glasses Transmission Tester Yt Tm106 Heat Insulation - China

YT-TM106 transmittance meter is a high-precision optical transmittance meter.

Transmittance is an important technical index of many optical products, such as glass, solar film, film coated glass, etc.

The test principle of the transmittance meter is to irradiate the tested substance with a visible light source.

The sensor detects the incident light intensity of the light source and the light intensity after passing through the tested substance.

The ratio of the transmitted light intensity to the incident light intensity is the transmittance, which is expressed as a percentage.

YT-TM106 solar film tester is specialized in testing the transmittance of automobile solar film, automobile heat insulation film, building film, building film heat insulation rate, as well as ultraviolet and infrared barrier rate.

The operation is simple and the measurement is fast.

Just put the tested object into the test tank and display multiple test results at once! The test principle of the transmittance meter is to irradiate the tested substance with different wave band light source, and the sensor detects the incident light intensity of the light source and the light intensity after passing through the tested substance.

The ratio of the transmitted light intensity to the incident light intensity is the transmittance, which is expressed by percentage.

A.

Yt-tm106 solar film tester parameters

1 - Test slot size: 50mm wide, large thickness glass can be measured;

2 - Resolution: 0.1%;

3 - Measurement accuracy: better than ± 2% (colorless, uniform and transparent substance), and better than ± 1% for factory standard sample;

4 - UV band: peak wavelength 365nm;

5 - Visible band: peak wavelength 550nm;

6 - Infrared band: peak wavelength 950nm;

7 - Mid infrared band: peak wavelength 1400nm;

8 - Display interface: Chinese and English display for selection;

9 - Put the test object into the test tank and automatically activate the test interface;

10 - USB charging: 2000mAh rechargeable lithium battery, convenient for mobile measurement.

B, Characteristics of yt-tm106 solar film tester

1 - Ultraviolet barrier rate, infrared barrier rate, visible light transmittance meter (transmittance meter) three in one.

2 - Suitable for the transmittance test of automobile film, explosion-proof film, building film, heat insulation film, film coated glass, etc.

3 - The instrument has a real-time dynamic self calibration function, which can be automatically calibrated after startup.

4 - It is easy to operate and fast to measure.

It is only necessary to put the tested object into the test tank and immediately display multiple test results such as heat barrier.

5 - Suitable for solar film performance exhibition, production, quality inspection, inspection and other occasions.

C, Precautions

1 - The thickness of flat transparent material can be measured to about 50 mm.

2 - The instrument has a real-time dynamic self calibration function, which can be automatically calibrated after startup.

3 - Avoid contact with corrosive substances and keep away from high humidity and high temperature environment.

4 - If there is no test object occasionally, the display data cannot be returned to normal, just shut down and restart the instrument.

5 - When the battery power is low, the battery needs to be charged.

Company Contact:

• Posted By: Shenzhen Yantuo Electronics Co.,Ltd

• Phone: +8618344297761

• Address: 宝安区 , 深圳 , guangdong , China

• Email:

• Website: http://www.yt-elec.com/

• Business Description: 3D cinema, 3D Polarization Modulator,3D Projector,passive 3D glasses, realD cinema,active shutter 3D,circular polarized 3D,DLP-Link Projector,3D system, digital Cinema,YANTOK