Uv Led Ink Testing System - Denmark

LED curing technology offers many benefits over traditional Mercury UV curing, such as lower operating costs and No stand by time and No ozone exhaust risks, the only problem for LED curing is wavelength.

Compared with mercury UV curing, LED curing system will provide much more energy at single wavelength, such as 365nm, 395nm, but Mercury UV curing system provide a “curing area” from UVB to UVA, which is more suitable for current ink system.

So it become more important to our clients test their LED ink before they decide to invest LED curing system for their printing or coating machine.

Compared with other suppliers in the market, SpeedyTM use sliding block carry ink sample or radiation meter by Linear Motion system with servo driver +Integrated PLC control to reach precision measurement at speed from 4-300m/min.

Our clients set testing speed and UV Energy on Touchscreen, Sliding block with ink sample run automatically at the setup speed when it passes the curing area, in the meanwhile lamp, will be automatic reach the setup energy.

After curing, the sample will be automatic return back to the start position.

SpeedyTM provides real-time picture for your curing result same as your printing machines.

See Video

Specification LED Curing Area: 82x60mm or up to client’s request Peak Wavelength: combination 365-385-395-410nm Peak Energy Output: up to 26w/cm2 Traditional UV curing (optional): 100mm Speed control: automatic, from 4-300m/min Control System: Integrated PLC Power Control Range: 0-100% with instant on-off Cooling System: closed loop water chilling with automatic flow control Certifications: CE, UL… Optional: LED or UV radiation test system - EIT LED-R

Company Contact:

• Posted By: DPL Industri A/S

• Phone: 004521785728

• Address: HEJREVANG 26 3450 ALLERØD DENMARK, ALLEROED , Denmark

• Email:

• Website: https://www.dpl.dk

• Business Description: DPL Industri A/S is a 100% Danish owned company.
  
  In the past 20 years,
  
  we sold more than 3000 UV curing system to our clients in the world.
  
  Since 2006, we started to produce COLD UV curing system, which can reduce the printing surface temp through our patent technology on UV lamp house, so your printing surface temp will be only 5 10C degree higher than your environment temp.
  
  In 2014, we delveoped our new multi function UV curing system, which is suitable for mercury lamp and LED lamp in same lamp house.
  
  DPL UV curing system is equiped with full closed water chilling system and air chilling inlet and outlet both.
  
  Our client can use the same system for Nitrogen air curing without invest extra equipment.