Wholesale Zr 50w Hv Co2 Laser Psu - China

ZR-50W CO2 power supplies

Feature

1 - This ZR-50W CO2 power supply adopts G/P/L/G/IN/5V as control signal output port with 5V/24V output and use gray aluminum case.

2 - This 50w laser power supply has stable performance: Each co2 power supply has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each50w laser power supply.

3 - Laser power control is simple on this 50w laser power supply, you can use 0 ~ 5V analog signal control the laser power, you can also use the PWM (pulse width modulation) signal to control output laser power.

4 - Good compatibility: This PWM/0-5V laser power supply can match with most brand 1000mm 50W CO2 laser tube and it also has a strong adaptability and fast response, engraving, cutting advantages of good effect.

5 - Control is simple: This co2 laser power supply selects high or low level control, the use of TTL-level control of the laser can start and stop.

At the same time it increases the protection switch, testing is through the external water and ventilation on this PWM/0-5V laser power source.

6 - Protection function: This PWM/0-5V laser power supply has open circuit protection: Under the condition of good protective earth, the50w laser power supply can work in open-circuit for a short time, which could avoid the damage to this PWM/0-5V laser power supply.

Specification

lnput Input voltage AC220V±10% (AC110V specified while order) AC frequency 47~440HZ Maximum input power 370W Maximum input current 1.7A

Output Maximum output voltage 25KV Maximum output current 25mA

(depending on the laser tubes of different manufacturers)

Efficiency More than 90% (Full load)

Response speed Not more than 1ms

Control lnterace TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)

Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection

Open Circuit Protection Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)

Environmental Requested Working temperature -10℃~50℃ Storage of temperature -20℃~75℃ Relative Humidity Maximum 85%RH (non-condensing) Altitude 100, 000 feet of work

200, 000 feet of storage, dose not work

Cooling methods Forced air cooling (fan cooling)

Dimensions (LxWxH) 162mmx145mmx97mm

Company Contact:

• Posted By: Jinan Ruby Laser Technology Co.,Ltd

• Phone: 13295411923

• Address: 8510 Room.Huiju Building.intersection of West Second Ring Road and Meili Road,Tianqiao District, Jinan , Shandong , China

• Email:

• Website: http://www.rlaserpowersupply.com

• Business Description: Jinan Ruby Laser Technology Co.,Ltd is main laser power supply manufacturer which was established at 2007 - From then on ,she has more than 17 years experience to research & develop, produce and sell ZRSUNS brand CO2 laser power supply and other laser cutting or engraving machine accessories.
  
  At present, our CO2 power supply has three series products(ZR series,BR series and DY series).
  
  ZR/BR series laser power supplies are used for ordinary CO2 laser tube and DY series CO2 power supply is specially for RECI brand CO2 laser tube.
  
  Based on client’s using feedback and’ innovation in electronic technology,the company developed LCD screen display laser power supply.
  
  Now ZRSUNS products covers 40W/50W/60W/80W/100W/150W /200W CO2 laser power supplies.
  
  Since its establishment,Jinan Ruby Laser Technology Co., Ltd attaches great importance to the quality of laser power supply to establish ZRSUNS brand’s good reputation in domestic and foreign markets In order to realize this goal, it has an experienced management team and skilled technical workers.
  
  And all accessories are purchased from United States, Japan,France, Taiwan and China’s well-known companies, some electronic components have UL,CE,CCC,TUV,SA certification.
  
  The laser power supplies are also produced accordance with the requirements of ISO9001 quality system.
  
  At present, all CO2 laser power sources have obtained CE certification, and they are used by the main laser engraving machine, laser cutting machine and laser marking machine manufacturers.
  
  Excellent quality, reasonable price and professional pre-sale and after-sales service team make ZRSUNS power supply become one of three great power supply manufacturers in China.
  
  ZRSUNS CO2 power source’s feature,specification and wiring connection method are completely same with each other, which can replace these two brands power supplies.
  
  Now Jinan Ruby Laser Technology Co., Ltd 's laser power supply have occupied about 40% of the Chinese market.
  
  Jinan Ruby Laser Technology Co., Ltd has 25 skilled technical workers, which can finish large quantity purchase orders in very short time with good quality.
  
  The company also has 4 chief engineers which make sure the company can customize the power supply on clients’ special requirement.
  
  esides standard laser power supply, ZRSUNS can also provide OEM services which can meet different clients special requirement in business.
  
  Now Jinan Ruby Laser Technology Co., Ltd hopes to establish good business relationship