Yixiang Brand Highly Profitable Aac Block Manufacturing Plant Cost - China

Yixiang Non-autoclaved Aerated Concrete Blocks Production Line Program can make a large use of fly ash, slag, stone powder and other wasted materials to produce new-type wall materials.

Raw materials are easily obtainable in every place, and are wasted materials.

No autoclaving is needed during whole production process, no emitting waste water, waste gas and waste solid.

Low investment, fast reward, easy operation, and blocks forming period is short, easy curing, significantly increase investment to build factory and cost of product, profit margin is large, reduced contamination the waste materials caused to environment.

This program truly integrates economic benefits, social benefits and environmental benefits.

1 - Raw materials are in wide range, cost is low

Not only fly ash, slag, sand, stone powder, lime, construction waste, etc can be used with our company's technology and machines to produce Non-autoclaved aerated concrete blocks, but also waste-utilization rate can reach 70%, raw materials are in wide range, no consumption of coal, low consumption of electric power, high automation level, workforce required is few, production cost is largely reduced meanwhile quality and strength of product will not decline.

2 - Low investment, quick reward

Traditional autoclaved aerated concrete blocks require investments of more than 3 million US dollars.

However the production technology and machines are only 150, 000 to 300, 000 US dollars.

Establishing factory is very easy, required land area is small, going into production after installation is fast, only one month is needed to go into production after installation, the investments is only within 20% of autoclaved aerated blocks factory.

And that the most technical parameters of non-autoclaved aerated concrete blocks transcend the traditional autoclaved aerated concrete blocks, and reach national technical standard.

3 - Low carbon & environmental friendly, energy saving & reducing emission

No burning and no autoclaving during the whole production process, no carbon emitting, no pollution, no waste water and waste residue, true green energy saving & environmental friendly construction materials.

4 - High technology

The manufacturing techniques and special technology researched and developed by our company, enhanced strength indexes(3.0~4.0Mpa) meanwhile improved waste utilization rate(70%), largely decreased cost, raised threshold that allows competitors enter into this industry and make competitors unable to and unallowed to imitate, effectively protected the market space and benefits of our company's product.

5 - Easily start up business

Adopt the method of overall output and support during whole process, design plan of building factory specifically suitable for you, guide construction on site, install and adjust machines, provide product formula and full sets of manufacturing techniques & procedure, provide operation training, leave no anxiety after building factory to entrepreneur.

There are two types of aerated concrete blocks in the market, one type is Autoclaved Aerated Concrete Blocks, which is featured of big and long autoclave reactors, the other type is Non-autoclaved Aerated Concrete Blocks, which needs far less investment than the Autoclaved Aerated Concrete Blocks.

Non-autoclaved aerated concrete blocks is a kind of lightweight porous silicate product, its main raw materials are siliceous materials(sand, fly ash and silicon-containing gangue, etc.

) and calcareous materials(lime, cement), added with aerating agent(aluminum powder), produced through process of batching, mixing, pouring, precuring, cutting, curing.

The existing construction heat preservation wall blocks, which contains a small number of cement and lime, its strength is mainly produced from hydrate crystal formed by steam heating and curing.

Company Contact:

• Posted By: Jingmen Yixiang Machinery Lt., Ltd

• Phone: +86 17786224233

• Address: Anzhankou Road, Dongbao District, Jingmen , Hubei , China

• Email:

• Website: http://www.jmyxjx.com/

• Business Description: Jingmen Yixiang Machinery Co., Ltd is a professional manufacturer of construction machinery and paper machinery since 2006 - Block/brick making machines can produce various environment-friendly bricks, blocks, road bricks, pavers, curbs etc.
  
  The company currently covers an area of 30000 square meters located in Dongbao Industrial Park of Jingmen city, central China.
  
  The company integrates R&D, production and marketing into its business scope, it sticks to the business concept as “ credit is the basis, clients are the first”.
  
  The company products are equipped with comprehensive and reasonable mechanical structure and functions, being dedicated to perfect and convenient operating procedures, will serve customers with integration of safety, high efficiency and professional.
  
  REGIONAL SERVICE
  
  The company establishes diversified regional offices and parts warehouses within the national range, provides 24 hour immediate service for customers.
  
  High quality service team in all these regional office realizes the functional service system which combines immediate response, return visits to customers, technical consultation, extra-value based supply of parts and accessories and employees training etc.
  
  The company has won a good reputation from customers at home and abroad with its professional and elaborate excellent service.
  
  PRE-SALES, IN SALES, AND AFTER SALES SERVICE
  
  Pre-sales service
  
  Factory planning, solution to technical problems and preparation consultation, profit analysis.
  
  In sales service
  
  On-site installation and debugging, training of operation technique, training of electromechanical maintenance personnel.
  
  After sales service
  
  Guarantee supply of various parts and accessories, strict implementation of “three guarantees” (for repair, replacement or compensation for faulty products), one year warranty (repair free of charge), lifetime maintenance after sales service.