Gsh Model Arc Grating Cleaner - China

GSH type series arc grille waste removers are used in water intake canal

of sewage treatment plant to hold up floater（as below called scum）in

the sewage, and so as to ensure the following process to operate safely

and normally.

IDENTIFICATION CODES

GSH－ － × － × GSH- Arc grille waste remover - Rake arm radius ( m) - Canal width ( m) - Canal depth ( m) - Bar net space ( mm) - Bar thickness ( mm)

CHARACTERISTIC

GSH type series are a new generation of waste remover designed on digesting imported equipment.

They have the following characteristic: 1 - With new type shaft- mounted reducer of vertical motor drive, without coupling, unnecessary aligning the centreline, low weight, much less occupied area than of epicyclic reducer, easy to parallelize several sets with small occupied area; 2 - With hydraulic pressure buffer, effectively reducing impact and noise as the scum skimming rake is repositioned; 3 - With over- torque protector, when the rake arm overloads due to accident electric power shall be cut off and the machine be stopped and alarms be given.

STRUCTURE AND OPERATING PRINCIPLE

As shown in the diagram 1, GSH type series arc grille waste remover is made up of arc bars, rake, rake arm, driver with base, frame and over- torque protector, scum skimming rake with buffer, scum guiding plate, and control panel.

The rake arm shall be by driver rotated around the centre of arc bars.

The work of waste removing shall start while the rake enters the gap between bars.

The scum intercepted by the bars shall be move up.

When the teeth rake touches the scum skimming rake, the scum shall be extracted by the effect of relative motion of teeth rake and scum scum board and sent to conveyor through scum guiding plate.

That is a complete process of waste removing.

When the teeth rake passes the scum scum board the scum skimming rake shall by repositioned slowly under the effect of the buffer.

Company Contact:

• Posted By: Nanjing lanshen Pump Corp.LTD.

• Phone: 15262427114

• Address: NO.305,East Xiongzhou Rd,Liuhe, Nanjing , China

• Email:

• Website: https://en.lanshengroup.com

• Business Description: Nanjing lanshen Pump Corp.
  
  LTD., founded in 1958, after 50 years of development, is now a registered capital of 50 million yuan, with assets exceeding 400 million yuan, accounting for area of 280 acres.
  
  China s first submersible sewage pump and mixer in the birth and to fill the gap.
  
  Currently has a centrifugal pump, switch type electric control, water treatment equipment for mass production of special machines ability to produce its own sewage plant and pumping station for more than 70% of the equipment.
  
  Lanshen Pump R & D and manufacture Submersible Sewage Pump , sewage pump, axial pump, submersible sewage pump.