Doing Latest Continuous Waste Tire Pyrolysis Plant - China

Doing latest fully continuous waste tire pyrolysis plant is designed to ensure safety, economy and environmental protection.

And this plant not only can work continuously for 24 hours.

but also feed in one side and dischage in another side.

The continuous tire pyrolysis plant can deal with tire, rubber, plastic, medical waste and oil sludge.

Introduction of Doing latest continuous waste tire pyrolysis process:

1, Tire pretreatment

Before pyrolysis, the whole tires need to be shredded into small pieces.

First, pull out the steel wire in tire sidewall; Then cut the tires into bulks.

If the tires diameter less than 1200mm, don’t need this step.

And can directly use next comprehensive shredder to cut into small pieces.

Crush the tire bulks or diameter less than 1200mm whole tires into 2-5cm small pieces.

2, Feed raw materials

Feeding tire pieces into reactor by feeding system.

3, Heat the reactor

Fire the fuel in the burning room, the fuel could be diesel, natural gas, LPG.

The hot air will flow into the reactor for heating.

When the inner temperature of the reactor reaches to 100 degree, the oil gas will be generated.

Then goes into the buffer tank firstly.

In the buffer tank, the heavy particles will be liquefied into heavy oil and drop in the heavy oil tank.

The light oil gas rise up.

The buffer tank will reduce the oil gas moving speed and then goes into condensers uniformly.

4, Condensation

In the horizontal cooling system, the oil gas will be liquefied into fuel oil.

A large scale of oil gas will be liquefied into fuel oil and enter oil tank.

In the hydroseal, the combustible gas will be desulfurated and cleansed.

Then recycled to the reactor to provide heat, saving a lot of fuel.

Hot smoke gets out from the reactor through smoke cleaning system.

system.

The clean smoke can meet the EU environmental protection and emission standards.

5, Discharge

The cabon black with steel wire will be discharged by the auto screw discharger.

Through the magnetic separator, the steel wire and carbon black will be separated, and transported into the storage tank.

Final products of Doing latest continuous continuous waste tire pyrolysis plant:

And the final pyrolysis products have many uses.

For example, the tire pyrolysis oil can be used as industrial fuel materials for burning, or further refined to diesel or gasoline by waste oil distillation machine.

The carbon black from tire pyrolysis can be used for construction bricks with clay or used as fuel.

The steel wire can be re-sale or reprocessing.

There is also a little combustible gas producing in the process, the gas can be recycled to heat the reactor as fuel, which will save energy for the whole working process.

Advantages of Doing latest continuous waste tire pyrolysis plant:

1 - Continuous pyrolysis plant adopts the screw feeding sealing system technology, which is hold by the company’s invention patents, hot air heating furnace circulating heating technology, heat drying technology with high heat exchange efficiency and capacity.

2 - Impeccable electrical control system save labor costs.

3 - Three waste utilization reasonable recovery can basically realize of zero emissions, safety and environmental protection.

So far, Doing pyrolysis plants have been exported to many countries: they are Ukraine, Korea, Brazil, Indonesia, Dominica, Nigeria, Hungary, South Africa, Romania etc.

Welcome to visit our factory, we are looking forward to cooperating with you!

After-sales Service of Doinglatest continuous waste tire pyrolysis plant:

1 - Design the installation drawings according to your site.

2 - 1 year warranty, engineers available to service at any time.

3 - Periodical call visit, to make sure there is no problems of the equipment.

4 - Design specific maintenance program according to different situation of your plant.

5 - For each set of machine, one technician will be sent to guide your installation, test the machine and train your workers.

Company Contact:

• Posted By: Henan Doing Mechanical Equipment Co., Ltd

• Phone: +86-371-5677 1821

• Address: Room 1408, 14th Floor, Building 9, No.133 Yaozhai Road, Jinshui District, Zhengzhou City , Henan , China

• Email:

• Website: https://www.wastetireoil.com

• Business Description: Doing produced pyrolysis plant , the pyrolysis plant can recycling waste tire/plastic/rubbber and convert waste tyre/plastic/rubber to fuel oil .
  
  Henan Doing Mechanical Equipment Co., Ltd is a leading manufacturer specialized in waste tire /plastic/rubber recycling machine, waste tire & rubber pyrolysis plant, waste tire/plastic/rubber crude oil distillation plant and copper wire recycling machine from Research & Development, Design, Manufacturing to Installation & Commissioning.
  
  DOING GROUP focus on the international market, and products are 100% exported.
  
  We have an international trade team with 30 members, 5 senior process engineers, 7 senior mechanical design engineers and 100 workers for production.
  
  Our products have been exported to more than 20 countries and regions such as Italy, Macedonia, Turkey, Iran, Egypt, Mexico, Ecuador, Haiti, Congo, Uganda, Nigeria, India, Pakistan, Thailand, Malaysia, Bangladesh etc.
  
  With factory area more than 20000㎡and equipped with digital control cutting machine, auto-welding machine, large rolling machine, p&c lab for quality control and X-ray detection room etc, DOING GROUP is capable of modern production.
  
  The headquarters of DOING GROUP is located in Zhengzhou the capital city of Henan province, where it takes 30 minutes driving from the Xinzheng International Airport(CGO) and only 20minutes driving from east high-speed railway station, and the transportation is very convenient.
  
  Also we specially prepare cars for customers pick up.