Led Lighting Power Box - China

LED control electric box / cabinet ■ Overview LED control

electrical cabinet applies to the information screen, traffic guidance

screen, advertising screen, car screen, stadium screen, stage rental,

screen and staircase screen display control system, which serve to

control the LED display, executive function, through power, protection,

monitoring and distribution of electric energy role.

■ Usage and

Functionality: The power monitor: screen step-by-step delay power

through the control box / cabinet pre-installed programs, in order to

avoid the catchy switch tripping fault, but also reduce the impact on

power in the power-on screen body.

The fault alarm status box on the

control interface of each power supply power-on state of alarm

indicator.

And through the communication module of the switch to remote

monitoring and operation.

Fire Monitoring: install smoke detectors in

the top of the screen within the screen if the fire occurred, the smoke

detector probe signal to the control box, control box to start alarm

message, the control box / cabinet received signal switch automatically

shut power, so as to protect the screen.

Temperature monitoring: the

upper part of the on-screen to install the temperature sensor, computer

control interface can be as real-time temperature monitor on the

display.

Automatic mode, the screen body temperature exceeds 54 ℃,

the control interface on the current temperature value will be flashing

prompts; when the screen body temperature exceeds 60 ℃, the

temperature sensor will send the signal to the control box / cabinet,

then the control box / cabinet received signal is in charge of auxiliary

contacts of the switch action, switch power failure display will

automatically shut power in order to prevent equipment failure and

causing a fire.

Users can accord to their usage, set alarm temperature

and off-screen temperature on monitoring interface.

Door alarm

monitoring: the inside of the installation of the threshold switch in

the power distribution cabinet door, door alarm monitoring interface

monitoring to prevent someone opened the door to destruct the

distribution cabinet which installed in the outdoors, Display automatic

control: when groups display and perform in different functions, when

you need a control system to control their respectively tasks in the

control box to the implementation of state corresponding function can be

done through the PLC, you can also choose the time control switch, time

relay, communications switches and other electrical components to

achieve the user's orders of the operating instructions.

■

Implementation of standards LED control box / cabinet is assembled by

the manufacturer are fully type test, advanced low-voltage switch box /

cabinet, it is consistent: The national standard GB7251 - 87 low voltage

switchgear; Professional standards ZBK36001 - 89LED voltage switchgear;

International standard IEC439 - ■ Use of the environment Ambient

air temperature is not higher than +40 ℃, and less than a 5

℃, average temperature is not higher than +35 ℃ within 24

hours; Relative temperature of +40 ° C maximum temperature does not

exceed 50%, at lower temperatures allows relatively high temperature,

such as +20℃ 90%; The air is clean, non-corrosive and explosive

gases, non-conductive and without dust can damage the insulation; No

significant shake , shock and vibration occasions, if mounted vertically

the tilt should not exceed 5 degrees; Altitude is not over 2000 meters;

Switchgear for the following temperature transportation and storage: 25

℃ to +55 ℃, in a short period of time (not more than 24

hours) does not exceed +70 ℃; If users can not meet the above

conditions should consult with the manufacturer.

■ The main

technical parameters Rated insulation voltage 660V; Rated working

voltage 380V; Auxiliary circuit rated operating voltage AC 380V, 220V;

Busbar rated current: 10A ~ 1600A; Busbar rated short time withstand

current: 50KA (rms) 1 seconds; Busbar rated peak withstand current:

105KA; Branch busbar rated current: 630A, 800A; Branch bus bar rated

short time withstand current: 30KA, 50KA (rms) of 1 second; Branch

busbar rated fixed peak withstand current: 63KA, 105KA; Housing

protection grade IP40 - ■ Selection and Configuration In general,

unit selection and configuration of an electric switching equipment will

be begin from the following aspects: - Cabinet choices: The

materials have cold rolled steel or angle iron (for welding cabinet, low

cost, high strength general-purpose type); deposited aluminum zinc steel

or galvanized steel (used to assemble the cabinet); stainless steel

plate (not permeability) ; aluminum ((permeability); the SMC composite

unsaturated materials.

Installation types: indoor and outdoor.

-

The cabinet's main electrical components brand choice: High price: ABB,

Schneider, United States AB, Mitsubishi, Siemens, Omron, Muller,

Weidmuller, Phoenix, Hager, Legrand, etc.

Moderate price: Changshu, the

Long March, China through Shanghai Wuchang, Shihlin, refinement, and so

on.

Low price: Tengen, Chint, West Germany, the people of appliances,

Watertown, Taian, river, etc.

- Cabinet auxiliary components

Copper busbar connections, aluminum row connection and wires connected.

■ Control box / cabinet classification A single control box /

cabinet Control box / cabinet Simple control box / cabinet Intelligent

control box / cabinet Built-in control box Independent control box /

cabinet ■ Structure Cabinet by steel sheet metal forming, take the

20mm modulus for the standardized design, with versatility of structural

components and high mechanical strength; upper cabinets body is main

busbar room, the front is the electrical room, the rear is the cable

in/out chamber, each room have steel or insulation board for isolation

in order to ensure safe usage; There have galvanized or two kinds of

electrostatic powder coating on the surface protective layer of the

cabinet structure parts, so it with reliable quality and beautiful

color; ■ Dimensions Number of electrical components according to

user needs and the control box / cabinet is belongs to a custom product.

■ Installation: Household type, outdoor type and semi-outdoor type

■ Order Attention The user should be provided (the user can also

provide specific requirements, all of the following are required to

provide information for the user by the Company engineers designed and

then handed over to the production after the final validation of the

user): Primary circuit of the program and in-line system diagram;

Secondary circuit diagram, if the user does not make demands, will take

the factory standard wiring; Switchgear the Pareto substation plan;

Detailed specifications for each loop circuit elements; The control box

/ cabinet surface color; Other special requirements.

Led Lighting Power Box

For any questions and needs please contact us below

Company Contact:

• Posted By: Langyi Power Equipment Co., Ltd.

• Phone: 8675529822720

• Address: A1 Building ,Yuanling Industiral Park, Shiyan Twon, Shenzhen , China

• Email:

• Website: http://www.langyi-power.com

• Business Description: "Langyi Electrical Group Co., founded in 1980, with more than 35000M2 manufacturing space, 650 employees, it becomes one of the leading manufacturer of industrial electric product in China.
  
  As well as one of the earliest factories in the line with nearly 30 years experience in producing and developing for electric equipment.
  
  The Group has successfully developed and producing various categories in industrial electric products which include: Circuit Breakers, Panel Boards, AC contactors, Meters, Relays, Fuses, Control Units as well as many other electrical accessories such as LED lighting.
  
  
  
  Lanyi Group owns modern R&D center for developing electric products with full line of high tech moulding, manufacturing equipment and great strength of technical support, besides advanced design forces powered by first class engineering teams with super industrial computer systems.
  
  Thus, each piece of the product is fully assured with top reliable quality, scientific and novel design as well as excellent workmanship.
  
  In order to keep the leadship in electrical industry, Langyi Group continuous increase and update manufacturing facilities, keep improving techniques and adopting the most advanced inspect instrument to bring our products to an even higher quality level along with impeccable & rapidly delivery service.
  
  Langyi Group obtained ISO9001 quality system certification, ISO14001, OHSAS18001, CB certification; SEMKO and CE certification, etc.
  
  It is no doubt that the products are warmly welcomed not only in domestic but also in overseas market year after year.