2 Phase Stepper Driver Dvs34ma - China

Constant angle, constant torque micro step driver, the drive voltage of

which is from 12V to 40VDC.

It is designed for use with 2 phase hybrid

stepper motor of all kinds with 42mm to 57mm outside diameter, 6, 8

leads, regulated phase current from 0.5A to 3A.

The unique control

circuit that it adopts can reduce motor’s noise, make motor run more

smoothly, improve motor’s performance by 30% at high speed, reduce

driver’s heating by 50%.

It is widely used in small size of numerical

control devices with higher resolution such as carving machine, laser

labeling machine, inner laser curving machine and etc.

FEATURES

* 4 channels constant angle and constant torque micro step, highest micro step: 64

* Highest response frequency: 200Kpps

* Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second

* Bipolar constant current chopping mode

* Opto-isolated signal I/O

* Drive current is continuously adjustable from 0.5A/phase to 3A/phase

* Single power supply voltage from 12V to 40VDC

2 Phase Stepper Driver Dvs34ma

Please see our contact information below

Company Contact:

• Posted By: Shenzhen DVS Mechatronics Co., Ltd.

• Phone: 8615914061564

• Address: No.401, 7 building, Xili industrial Park, Nanshan , Shenzhen , China

• Email:

• Website: http://www.dvsjd.com

• Business Description: Shenzhen DVS Mechatronics Co., Ltd. is a hi tech enterprise that specializes in the development, production and sell of stepper drivers and stepper motors.
  
  The main products of our company is DVS stepper driver, it has 2 phase and 3 phase two series.
  
  The products are not only high performance, high quality, and powerful functions, but also high efficient and cost effective.
  
  Besides the drivers, we have got DV stepper motor.
  
  Our products are widely used in numerical machine, laser curving machine, computerized embroidering machine, packing machine, labeling machine, coil winding machine, dimensional measuring machine, three dimensional plat, robot, medical apparatus, pottery and porcelain industry and so on.
  
  We have a experienced R&D, production and sales team can provide professional service, helping customers to choose models, design hardware and software for special.
  
  In the meantime, a long term after service is our important job.
  
  We always adhere to our policy good quality and good service above everything and contain the customers good quality production and service.