Pwm To 0 10v Tsr1 Spindle Speed Controller - India

Interface Cards

SPEED Control, PWM to 0- 10 V, VFD interface Mach, EMC

Tiny Controls presents Interface Cards to interface the CNC controlling software like Mach3/ EMC to variable frequency drives.

It is a fully isolated PWM to 0-

10 V convertor for interfacing PC based software like Mach3, Turbo CNC, EMC2, KCAM etc to VFDs and controls the spindle speed.

Listed below are a few important features:

1 - Turn off of PWM at and below 10% of duty cycle.

2 - On board LED indicator for status.

3 - No signals are floating even power is not connected.

4 - PWM to 0- 10V output adjustment with preset.

5 - One General purpose relay and one for Spindle speed controlling function.

6 - PWM to analog voltage and General purpose relay section are isolated for noise immunity.

7 - Input and Outputs are Isolated.

8 - 0- 10V output can be adjusted using preset.

9 - Works over a wide range of PWM frequency.

.

10 - 2 on board relays for On- Off control

11 - One relay is auto triggered when PWM duty cycle is more than 5% and can be used for spindle On/ Off control if CNC software bumps the PWM to zero when

switching off the spindle.

This can save one output pin on parallel port.

12 - Second Relay is independent and can be used for On/ Off or any other function.

Company Contact:

• Posted By: Tiny Controls Pvt Ltd

• Phone: 09911193210

• Address: C 55, Nishat Park Kakrola, New Delhi, India

• Email:

• Website: http://www.tinycontrols.com

• Business Description: we are working since 2011 in the automation field with the aim to
  
  provide the best quality automation products matching the current
  
  standards of CNC industry at reasonable costs.
  
  we are the supliers of
  
  stepper motors and high speed spindle motors and are the manufacturer of
  
  stepper motor drivers, CNC breakout boards, C
  
  USB cnc Controllers, cable drag chains, reduction gear assemblies, power supplies, stepper motor controllers, spindle mounts, stepper pulse generators, CNC controllers, Mach3 CNC controllers