Portable E1 Datacom Transmission Analyzer Gao A0020003 - Canada

Overview – Portable E1/Datacom Transmission Analyzer This E1/Datacom

transmission analyzer is designed for performing comprehensive analysis,

measurement and evaluation of telecom networks.

It performs E1 frame

data monitoring and analysis, dual E1 channel testing, loop delay, APS

delay, pulse measurement, jitter measurement, signal level measurement.

It also has many enhanced test functions such as 'PCM Simulator',

'Mux/Demux', 'Drop & Insert' and 'Network Tools'.

It is widely used in

R&D, production, installation, verification and maintenance of SDH, PDH,

PCM, DTU and Data protocol converter equipment.

Key Features – Portable E1/Datacom Transmission Analyzer

•Easy-to-use, handheld design

•Full-featured measurements to E1, Datacom and unique IP PING testing from Datacom

•Large color touch screen with high resolution

•Smart menu navigation

•Extensive error and alarm generation, detection and indication

•Save/Recall of up to 10 user-defined configurations and 10 groups of results

•Built-in Li-ion rechargeable batteries and AC power supply as well

•Test results can be uploaded, conserved and printed by Test Manager Pro software

Basic Functions – Portable E1/Datacom Transmission Analyzer

E1 Testing

•120 Ω balance and 75 Ω unbalance line interfaces

•HDB3 and AMI line codes

•Out-of-service framed and unframed testing

2 Mb/s, 64 Kb/s BER testing

Frame data and alarm monitoring

Clock slip measurement

•In-service framed and unframed testing

Hi-Z and through mode testing

CODE, FAS, CRC4, E-BIT BER testing

Frame data and timeslot activity monitoring

Monitoring of octet code in any selected timeslot

Built-in 64 kb/s tone channel monitoring capability

ABCD code monitoring in CAS signaling

TS16 monitoring in CCS signaling

•Double E1 channel testing

Double E1 channels Rx Hi-Z and through mode testing

Double E1 channels Code, FAS, CRC-4, E-BIT BER testing

Double E1 channels FAS/NFAS, CAS Multi-frame, CCS timeslot 16 and timeslot activity monitoring

Double E1 channels timeslot data monitoring

Double E1 channels built-in 64 kb/s tone channel monitoring capability

Double E1 channels CAS and CCS signaling monitoring

•Round trip delay measurement

•APS delay measurement

•Pulse Mask Measurement

Input E1 pulse shape display

Pulse width measurement

Pulse width and amplitude ratio measurement

Up-edge and down-edge time measurement

Overshoot and undershoot ratio measurement

Pulse amplitude and level measurement

•PCM simulator

Extensive error insertion and alarm generation

Frame data control and monitoring

Idle word insertion in one or more timeslots with programmable pattern

VF tone generation and measurement in one or more timeslots

Listen to any voice channel in the receiver via earphone

Talk to any voice channel in the transmitter via microphone

Perform the tests of signal level and frequency of the VF channel simultaneously

CAS and CCS signaling generation and monitoring

•Frequency and Offset measurements

•Level measurement

•Transmit clock deviation up to 999ppm

•Clock source: Internal, Interface and External 2 M clock/signal

•Testing pattern: PRBS, Fixed Code, 16-BIT User-programmable word

•Error insertion: Single and Fixed Rate

•Real-time transmit circuit status indication: open/short

•Manual or auto-timer measurements

•Performance analysis according to G.

821, G.

826, and M.

2100

Network Testing

•IP PING

•Trace Route

•IP Config

Other Functions

•Auto-configuration:

E1 frame format, BERT pattern, the timeslots carried BERT pattern automatic detection and setting for E1 testing

BERT pattern and Tx data rate automatic detection and setting for Datacom testing

BERT pattern and octet timing automatic detection and setting for G.

703 64 kb/s CO testing

•Real-time clock

•BERT pattern: PRBS, Fixed Code, 16-BIT User-programmable word and QBF

•Error insertion: Single and Fixed Rate

•Reset the results to zero and auto configure

•Manual or auto-timer measurements

•Self-check, keyboard and LED testing

•Performance analysis according to ITU-T G.

821, G.

826 and M.

2100

•Histogram analysis of error and alarm events

•Upgradeable software via USB interface

Optional Functions

•Option 1: Jitter Testing

Peak-to-peak jitter measurement

Jitter measurement comply with O.

172 filter

Hit seconds and hit free seconds counts

•Option 2: Datacom Testing

Datacom (V.

24, V.

35, V.

36, X.

21, RS-449, RS-485, EIA-530 and EIA-530A) BER testing

Asynchronous BER testing at a baud rate range of 50 b/s to 57.6 b/s

Synchronous BER testing at a data rate of 1.2 kb/s to 2048 kb/s

DTE or DCE equipment emulation

Synchronous clock source selectable

Frequency measurement

Handshaking signals control and monitoring

•Option 3: G.

703 64 kb/s CO Testing

G.

703 64 kb/s Co-directional BER testing

Octet timing control and monitoring

Frequency and offset measurement

Transmit clock source: Internal and Interface

•Option 4: Mux & Demux Testing

E1-Datacom synchronous 64 kb/s, N¡64 kb/s BER testing

E1-G.

703 CO synchronous 64 kb/s BER testing

Frequency and Offset measurement of Rx interface

Handshaking signals monitoring of Datacom interface

E1 framed data and alarm monitoring

•Option 5: Drop & Insert Testing

Insert mode: Insert synchronous 64 k, Nx64 kb/s data from Datacom or G.

703 CO interface to one or more timeslots of E1 signal

Drop mode: Drop one or more timeslots data from E1 signal to Datacom or G.

703 CO interface

Insert Drop mode: Insert and drop one or more E1 timeslots data from or to Datacom or G.

703 CO interface

Technical Specifications – Portable E1/Datacom Transmission Analyzer

E1 Testing

Internal Clock

2048 kb/s 10 ppm

Line Interfaces

75 Ω (Unbalanced)

120 Ω (Balanced)

High Input Impedance>2 kΩ

Line Code

HDB3, AMI

Frame Type

Unframed, PCM30, PCM30CRC, PCM31, PCM31CRC

Tx Clock Source

Internal, Interface and External 2 MHz clock or HDB3 signal

Pulse Mask Measurement

Comply with ITU-T G.

703 recommendations

Jitter Measurement

Comply with ITU-T G.

823, O.

172 recommendations

G.

703 64 kb/s CO Testing

Line Rate

64 kb/s ± 100 ppm

Line Interface

120 Ω, Balanced

Line Code

AMI

Datacom Testing

Line Interfaces

V.

24, V.

35, V.

36, X.

21, RS-449, RS-485, EIA-530, EIA-530A

Data Rate

ASYNC: 50 b/s to 57.6 kb/s

SYNC: 1.2 kb/s to 38.4 kb/s, Nx64 kb/s (N=1 to 32)

Datacom Device Mode

DTE, DCE

Ethernet Testing

Working Mode

Full duplex, 10/100M compatible

Error Insertion

Type: BIT, FAS, CODE, CRC4, E-BIT

Mode: Single, OFF

Others

Display

4.3 inch large size display with backlit color touch screen

Rechargeable Battery

Li-ion battery, continuous working for 4 hours

Recharge Time

Approx.

2 hours

Power Supply

AC Adapter:

Input: 100 V to 240 V AC, 50/60 Hz

Output: 12 V DC /1.5 A

Battery: Li-Ion battery

Test Manager Pro Software

Operating System: WIN98/ME/2000/NT/XP

Operating Temperature

0 °C to 50 °C

Storage Temperature

-30 °C to 70 °C

Humidity

5% to 95% non-condensing

Dimensions

233 mm × 110 mm × 64 mm

Weight

Approx.

800 g

Portable E1 Datacom Transmission Analyzer Gao A0020003

Feel free to contact us with all your questions

Company Contact:

• Posted By: GAO Tek Inc.

• Phone: 4162920038

• Address: 601 Milner Avenue Third Floor Toronto, Ontario, Ca, Toronto , ON , Canada

• Email:

• Website: http://www.gaotek.com/

• Business Description: involved in international trade import export of goods, products, and services
  
  Our Products:
  
  - portable e1 datacom transmission analyzer gao a0020003
  
  - handheld e1 bit error rate ber tester gao a0040007
  
  - portable adsl2 tester gao a0010003
  
  - high performance digital signal level meter gao a0n00010
  
  - handheld catv signal level meter gao a0n00003