Needle Flame Tester Zlt Zy2 - China

The ZLT Needle Flame Tester is used to assess the fire hazard of such

component materials.

The test is performed to determine that the test

flame does not cause ignition of parts, or that a combustible part

ignited by the test flame has a limited duration of burning or a limited

extent of burning, without spreading fire by flames or burning or

glowing particles falling from the test specimen.

The ZLT Needle-Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator.

The Needle Flame Tester consists of a Ф0.9mm needle burner that tilts to 45° from the vertical and is fueled with butane gas.

The test time for the temperature of the standard copper block to increase from 100°C ±5°C to 700°C ±3°C shall be 23, 5s ±1, 0s.

Test flame height is adjusted 12mm ±1mm.

The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen.

It consists of a tube with a bore 0.5/font> 0.1mm and gas-flow regulating valve for adjustment of the flame height.

It shall be used with a pressure regulator.

The instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.

Standard outfit:

1 copper block, Cu-ETP UNS C11000, 4 mm±0, 01 mm, weight 0, 58 g±0, 01 g before drilling, accordance with IEC60695-11-5 figure A1, with clamping mechanism, with Φ0, 5 mm for the thermocouple,

1 needle burner, stainless steel bore, Φ0, 5mm±0, 1mm, outer diameter ＜Φ0, 9 mm, length＞35mm, to produce 12 mm±1 mm flame height,

1 scale to measure flame height,

1 temperature measurement system, the test time for the temperature to increase from 100℃±5℃to 700℃±3℃ is 23, 5 s±1, 0 s,

1 type K thermocouple Chromel-alumel, Φ0, 5 mm, length approx.

500 mm, to indicate the temperature of the copper block, with digital display measuring range 0~1050℃, built-in operable,

1 chamber with a volume of at least 0, 5 m3, black interior,

1 wooden board, 10 mm thick, 10 sheets of wrapping tissue, of grammage between 12g/㎡~30g/㎡ .

Power supply: 220V50Hz other voltages request.

Company Contact:

• Posted By: Guangzhou Zhilitong Electromechanical Co.,Ltd.

• Phone: 862081600059

• Address: 1/F,No.2 Building,287 Longxi Road,Liwan District,G, Guangzhou , China

• Email:

• Website: https://www.electricaltest.com.cn

• Business Description: The ZLT Electrical Safety Testing Equipment is a selection of common
  
  testing equipment for Flammability Testing, Protection Against Water,
  
  Mechanical Durability, and Accessibility.
  
  They are used to test consumer
  
  appliances, enclosures, power cords, plugs, sockets, and other
  
  electrical and electronic items.
  
  All of these instruments conform to
  
  standards such as IEC, EN, UL, VDE, CSA, GB, etc.
  
  Many of our products come with CNAS (ISO17025) calibration certificates or they are available for an extra charge.
  
  In addition, we have very competitive pricing on testing consumables that will work with different makes of test equipment.