Horizontal Vertical Flame Tester - China
price: contact company for price
The ZLT Horizontal-Vertical Flame Chamber Tester is a fully automatic
instrument contained in its own cabinet to maximize the safety of the
operator.
It screening procedure for comparing the relative burning
behaviour specimens made from plastic and other non-metallic materials
, exposed to a flame ignition source of 50W or 500W nominal power.
These
test methods determine the linear burning rate and the
afterflame/afterglow times, as well as the damaged length of specimens.
They are applicable to solid and cellular materials that have an
apparent density of not less than 250kg/m3, determined in accordance
with ISO845 - Then do not apply to materials that shrink away from the
applied flame without ignitiong;ISO9773 should be used for thin
flexible materials.
And it's the combustion test device of plastic
materials represented by UL-94 - It can perform each test of HB, V0 to
V2, 5V and VTM, HBF.
SPECIFICATIONS
Model ZLT-HV50 ZLT-HV500 ZLT-HV1000 ZLT-UL94
Test Flame 50W(burning test for V-0, V-1, V-2 classification) 500W(burning test for 5VA, V5VB classification) 1000W 50W and 500W
Burner Tube Internal diameter: ф 12mm±0.1mm, length: 110mm±0.1mm Internal diameter: ф 9.5mm±0.3mm, length: 100mm±10mm
Burning Angle
Thermocouple
Thermocouple Size O/D
Standard Copper Block Ф5.5mm±0.01mm, weight 1.76g±0.01g before drilling.
Cu-ETP Ф5.5mm±0.01mm, weight 1.76g±0.01g before drilling.
AndФ9mm±0.01mm, weight 10g±0.05g before drilling.
Cu-ETP
Time for Temperature to Increase From 100°C±5°C to 700°C±3°C; 44s±2s (preset) From 100°C±5°C to 700°C±3°C; 54s±2s (preset) From 100°C±5°C to 700°C±3°C; 45s±5s (preset) From 100°C±5°C to 700°C±3°C; 54s±2s and 54s±2s(preset)
Overall Height 18mm~22mm(adjustable) 38mm~42mm(adjustable) 50mm~60mm(adjustable) 20±2mm/40±2mm(adjustabl e)
Gas Supply(do not provide) propane, min.
98% purity, and air methane, min.
98% purity
Flowmeter 105±10ml/min 965±30ml/min 650±30ml/min, 10±0.5l/min 105±10ml/min and 965±30ml/min
Manometer 0 MPa to 0.1MPa 0KPa to 7.5KPa
Input Power
Volume Of Chamber >1m³, black interior >0.75m³, black interior
Outer Dimensions W*D*H=1192*580* 1190mm W*D*H=1192*580*
1190mm W*D*H=1220*700 *1500mm W*D*H=1192*580*
1190mm
Conform to standard UL94, IEC60695-11-4,
IEC60695-11-10 UL94, IEC60695-11-3,
IEC60695-11-20 IEC60695-11-2 UL94, IEC69695-11-3/4, IEC60695-11-10/20
Includes: Flame height gauge and 100% absorbent cotton
Company Contact:
- Phone: 862081600059
- Address: 1/F,No.2 Building,287 Longxi Road,Liwan District,G, Guangzhou , China
- Email:
- Website: https://www.electricaltest.com.cn
Published date: June 20, 2013
- Business Description: The ZLT Electrical Safety Testing Equipment is a selection of common
testing equipment for Flammability Testing, Protection Against Water,
Mechanical Durability, and Accessibility.
They are used to test consumer
appliances, enclosures, power cords, plugs, sockets, and other
electrical and electronic items.
All of these instruments conform to
standards such as IEC, EN, UL, VDE, CSA, GB, etc.
Many of our products come with CNAS (ISO17025) calibration certificates or they are available for an extra charge.
In addition, we have very competitive pricing on testing consumables that will work with different makes of test equipment.
Related listings
-
Tracking Tester Zlt LdqElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 20, 2013 - contact company for price
The ZLT Tracking Tester is used for the determination of comparative tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages. Th...
-
Needle Flame Tester Zlt Zy2Electronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 20, 2013 - contact company for price
The ZLT Needle Flame Tester is used to assess the fire hazard of such component materials. The test is performed to determine that the test flame does not cause ignition of parts, or that a combustible part ignited by the test flame has a limited dur...
-
Glow Wire Testerzlt GtrElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 20, 2013 - contact company for price
To determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards. The ignition source is imitated by an electrically heated wire loop against which the sample is pressed with a constant f...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"