High Quality Ultrasonic Flowmeter - China

Features：

1 - Repeatability Better than 0.2%

2 - Accuracy : ±1% of reading at rates>0.2 mps

3 - Response Time: 0-999 seconds, user-configurable

4 - Velocity: ±32 m/s

5 - Totalizer: 7-digit totals for net, positive and negative flow

respectively

6 - Liquid Types : Virtually all liquids

7 - Security Setup values Modification Lockout.

Access code needs

unlocking

8 - Display 4x8 Chinese characters or 4x16 English letters, display

instant flow, velocity, total flow, signal status

9 - Signal output Non-isolation RS232(FUJI extention protocol) , one

channel isolation OCT output

10 - Transducers Clamp on type transducers

11 - Transducer Cord Length Standard 2x10 meters, optional 2x 500 meters

12 - Power Supply 3 AAA Ni-H built-in batteries.

When fully recharged it will

last over 12 hours of operation.

13.100V-240VAC for the charger

14 - Data Logger Built-in data logger can store over 2000 lines of data

15 - Housing Material ABS

16 - Case Size 100x66x20mm

17 - Handset Weight 514g (1.2 lbs) with batteries

Technology features:

1: operating power: isolation 8-36VDC

2: current: 50mA(under the condition of connection without keyboard display and sound of buzzer)

3: signal output: one channel standard isolation RS485 output

One channel isolation 4-20mA or 0-20mA passive output.

Two channel OCT output(programmed between the pulse

width(6-1000ms), default before leaving factory (200ms))

4: signal input: two channel three wire system PT100 platinum resistor input loop, to make heat

meter has the function of displaying heat quantity.

Three channel 4-20mA input optional, accuracy: 0.1%, has the ability to input the

signals of pressure, liquid level, temperature and so on.



5: display: 2*10 backlit LCD, displaying instant flow rate, velocity, positive, negative, net totaliser

flow rate.

6: operating: 4 keypad tactile keyboard operating

7: other functions: automatic memory the positive, negative, net totaliser or flow rate and heat

quantity of the last 512 days, 128 months, 10years .

Automatic memory the time of power on/off and flow rate of the last 30 times, realize to replenish by hand or automatically, read the datas through Modbus communication protocol.

8: protection level: IP57

9: transducer: clamp-on type, insertion type, in-line type.

Optional accessory:

1: clamp-on transducer(standard S1 type, standard M1 type, high temperature S1H, high temperature

M1H)

2: insertion transducer(standard insertion B, cement insertion B)

3: in-line type transducer(hygienic type, standard type)

4: remote second times operation meter(wall-mounted type, panel-mounted type)

5: PT100 there wire platinum resistor(used for heat meter)

6: strap(applied with installation of transducers on cast iron, GRP, PVC, etc.

that can not be welded

directly.

7: special shielded twisted pair cable

8: ultrasonic thickness gauge(measure the thickness of pipe, reduce error, increase accuracy)

Company Contact:

• Posted By: Kaifeng Qingtianweiye Flow Instrument Co.,Ltd

• Phone: 18637891169

• Address: No.1, Wangbai Road, Huanglong Industrial Zone, Kai, Kaifeng , China

• Email:

• Website: http://www.hnqtyb.cn

• Business Description: We are Kaifeng Qingtianweiye Flow Instrument Co., Ltd, a subsidiary of listed company Henan SunTront Tec Co., Ltd.Our head office is a listed company since 2011 and its main products is intelligent electricity meters, while Our company mainly engaged in electromagnetic flow meter.
  
  The total area of our company is 15000 square meters, and the building area is 6000 square meters.
  
  Our company have five utility model patents, three software copyrights.
  
  And we also have production qualification and liquid calibration settings for flow meters from Dn25mm to DN2000mm.
  
  We have strong R&D capability.
  
  Our company and our head office have large quantity of running water industrial users, and we also have strong marketing capabilities on battery powered electromagnetic flow meter.
  
  We are expecting to cooperate with manufacturer who can provide battery powered flow converter, or through expand cooperation in various
  
  modes.
  
  To develop the Chinese market and international market of battery powered flow metertogether.
  
  To learn from each other and to achieve win win situation.
  
  We are expecting sincere cooperation.
  
  If you have interest, please feel free to contact us at any time.
  
  We are looking forward to hearing from you.