Gdjs Gdjw High And Low Temp Chamber - China

GDJS/ GDJW high and low temp chamber as IEC60068- 2 with programmable

function can print test report

Introduction:

It is according to IEC60068- 2- 1( GB/ T2423.1) and IEC60068- 2- 2( GB/ T2423.2) .

It is used to test the CFL/ LED which meets IES LM- 80- 08, electricity products, electronic components, material and so on.

Specification:

•The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra- fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip.

•The temperature controller is used by Korean TEMI display in English/ Chinese and German Siemens PLC, it can be communicated to PC via RS- 232 - The temperature accuracy is 0.1℃ and humidity is 0.1% R.

H

•The temperature sensor is platinum PT100 Ohms/ MV resistor

•The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater

•The cold system is applied by fully enclosed fan cooled single- stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries

•The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel

•The safety self- protection function include Electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over- current protection

•Working Power: AC380V±10% 3phases and frequency 50Hz/ 60Hz

•Working Environmental: Temperature is 5℃~+30℃ Humidity ≤85% R.

H

Company Contact:

• Posted By: Lisun Electronics Inc.

• Phone: +86 (21) 51083341

• Address: 113-114, No. 1 Building, shanghai , China

• Email:

• Website: https://www.lisungroup.com

• Business Description: Lisun Electronics Inc was found by Lisun Group in 2003 - We have sales & service offices in Shanghai, Russia, India and Korea.
  
  In 2012, we built a high level products show room & lab center in Shanghai.
  
  Lisun Group has set up a new manufactory in China to research and develop the world high-technology CFL & LED Test Instruments.
  
  Its quality system has been strictly certified by ISO9001: 2008 - The Lisun Group products have been authenticated by the third party lab and were awarded by CE certificate.
  
  As a CIE Supportive Member, all of the test instruments produced by Lisun Group are designed according to CIE Standards.
  
  Our main products are Goniophotometer, Spectroradiometer, Integrating Sphere, LED Test Instruments, CFL Test Instruments,Photometer and Colorimeter, EMC & EMI Testing, Electronic Ballast Tester, Electrical Safety Testing, Environmental Test Chamber, Plug and Switch Testing, AC and DC Power Supply and etc.
  
  Lisun Groups products have been sold to more than 150 countries and regions all over the world.
  
  Its quality is well accepted by many world famous companies such as UL, SGS, NIST, NIM, UNDP, Philips, OSRAM and so on.
  
  Lisun Group wins thousands of customers trust with motto “Right Product, Right Price and Right Service”.
  
  We will continue presenting more and more high quality products to our customers in future.