4 Channel Automotive Tester Diagnostic Oscilloscope Gao A0e20001 - Canada

Overview - 4-Channel Automotive Tester/Diagnostic Oscilloscope This 4-

channel, 60 MHz automotive diagnostics oscilloscope has a wide input

voltage range from 8 to 36 V, making it suitable for vehicle power

tests.

It has vehicle diagnosis functions; more than 20 kinds of

automatic measurement functions, automatic cursor tracking

measurements, as well as, fast Fourier transform (FFT) spectrum

analysis.

It is powered directly from the USB port of a computer, so

this kit can be used either in the workshop or on the road to test and

measure virtually all of the electrical and electronic components and

systems in motor vehicles.

Key Features - 4-Channel Automotive Tester/Diagnostic Oscilloscope

•4 Channels and EXT trigger, 60 MHz Bandwidth

•Plug and play, no external power required

•200 MS/s real-time sampling rate, 10 kb to 16 MB memory depth per channel

•8 to 36 V input voltage, suitable for vehicle power tests

•USB 2.0 interface, LAN and WIFI are optional

•More than 20 kinds of automatic measurement functions, PASS/FAIL check functions

•Built-in fast Fourier transform (FFT) spectrum analysis

•Compatible with Windows NT/2000/XP/Vista and Windows 7

Functions - 4-Channel Automotive Tester/Diagnostic Oscilloscope

Vehicle diagnosis

•Ignition (primary and secondary)

•Injectors and fuel pumps

•Starter and charging circuits

•Batteries, alternators and starter motors

•Lambda, Airflow, knocks and MAP sensors

•Glow plugs / timer relays

•CAN bus, LIN bus and FlexRay

Technical Specifications - 4-Channel Automotive Tester/Diagnostic Oscilloscope

Input

Max.

Sample Rate

200 MS/s (Single Channel)

100 MS/s (Dual Channels)

Channels

4 Channels

Bandwidth

60 MHz (-3 dB)

Vertical Resolution

8 bits/channel

Gain Range

10 mV to 5 V/div at x 1 probe(10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V/div1, 2, 5 sequence)

100 mV to 50 V/div at x 10 probe

1 V to 500 V/div at x 100 probe

10 V to 5 kV/div at x 1000 probe

200 mV to 100 V/div at 20 : 1

Range

8 divisions

Offset Level

± 4 divisions

Coupling

AC, DC, GND

Offset Increments

0.02 div

Impedance

1 M ohm

DC Accuracy

± 3%

Input Protection

35 Vpk (DC + peak AC < 10 kHz, without external attenuation)

Display Mode

Y-T, X-Y

Time Base

Time Base Range

5 ns/div to 1000 s/div(1-2-5 sequence)

Acquisition Mode

Real time sampling: 5 ns /div to 200 ms/div.

Roll mode: 500 ms/div to 1000 s/div

Range

10 divisions

Buffer Size

10k to 16M points (Single Channel)

Trigger

Type

Edge trigger, Pulse trigger

Mode

Auto, Normal and Single

Auto Set

Yes

Range

10 divisions

Trigger Level

± 4 divisions

Stability

0.02 div increments

Math

Measurements

Vpp, Vmax, Vmin, Vmean, Vrms, Vamp, Vtop, Vbase, Vmid, positive overshoot, negative overshoot, cycle mean, cycle RMS, period, frequency, positive pulse width, negative pulse width, rise time (10%~90%), fall time (10% to 90%), positive duty cycle, negative duty cycle

Math

Addition, Subtraction, Multiplication, FFT

FFT

Rectangular, Hanning, Hamming, Blackman Window

Physical

Interface

USB2.0 (USB1.1 compatible)

Power

External power source required(8.5 v dc)

Dimensions

224 mm x 168 mm x 37 mm

Weight

1 kg

4 Channel Automotive Tester Diagnostic Oscilloscope Gao A0e20001

Feel free to contact us with all your questions

Company Contact:

• Posted By: GAO Tek Inc.

• Phone: 4162920038

• Address: 601 Milner Avenue Third Floor Toronto, Ontario, Ca, Toronto , ON , Canada

• Email:

• Website: http://www.gaotek.com/

• Business Description: involved in international trade import export of goods, products, and services
  
  Our Products:
  
  - portable e1 datacom transmission analyzer gao a0020003
  
  - handheld e1 bit error rate ber tester gao a0040007
  
  - portable adsl2 tester gao a0010003
  
  - high performance digital signal level meter gao a0n00010
  
  - handheld catv signal level meter gao a0n00003