Jmy506 Iic I2c Uart Interface Hf Rfid Reader Writer Modules - China

JMY506 series are RFID reader/ writer module with UART and IIC serial

ports.

JMY506 has various functions and supports multi ISO/ IEC standard

of contactless card; the cards from different suppliers.

The RF protocol

is complex.

But the designer combined some frequent used command of RF

card and then user could operate the cards with full function by sending

simple command to the module through IIC or UART interface.

And the

module and antenna are separate design.

The impedance between RF module

and antenna was tuned by impedance analyzer.

And then the module has

excellent performance and stability.

The module and antenna is linked by

50ohm coaxial line.

The performance is good, though the wire can reach

10m.

Normally the wire should be 60cm that is the module' s best

performance and stability.

Qualifications:

PCD: NXP RC522, RC523

Working frequency: 13.56MHz

Antenna connection: by 50ohm coaxial line, ( recommend 60cm, Max.

10 meters) , due to order

RF standard: ISO14443A, ISO14443B

Operating distance: 80mm( depending on card and antenna design)

Anti collision ability: Full function anti collision; be able to process multi- cards simultaneously; be able to set operate single card only

Auto detecting card: Supported, default OFF

EEPROM: 512 Bytes

Interface: IIC& UART( selected by SPS pin, recommend to use IIC)

Communication rate: IIC- - 400Kbps, UART- - 19.2Kbps/ 115.2Kbps

Max.

command length: 254 Bytes

Interface level: 3.3V( TTL level; 5V tolerance)

Power supply: DC 5.0V

Power consumption: 50mA

Dimension: 42mm×21mm×8mm

Weight: about 15g

Operating temperature: - 25 ~ +85 ℃ ( - 77 ~ +185°F)

Storage temperature: - 40 ~ +125 ℃ ( - 104 ~ +257°F)

Company Contact:

• Posted By: Jinmuyu Electronics Co., Ltd

• Phone: 861069559637

• Address: Room 132, Building 16, Tian Qiao Wan, XinHua North, Beijing , China

• Email:

• Website: https://www.jinmuyu.com

• Business Description: Jinmuyu is one of the leading 13.56MHz RFID reader manufacturers.
  
  We
  
  build, design and customize products to satisfy a range of customers.
  
  Our production facilities are certified under ISO/IEC10373 6, EMV2000,
  
  EMV2010 and PBOC 2.0 which are recognized all over the world.
  
  Our
  
  products support ISO/IEC14443A, 14443B, 15693 and ISO7816(T=0, 1)
  
  protocols and also support MIFARE 1K, MIFARE 4K, FM11RF08 C, MIFARE
  
  Mini, DESFire, MIFARE Plus; CPU cards(Type A/B, dual Interface, T=CL);
  
  SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, AT88RF020; NXP I.
  
  CODE SLI,
  
  TI Tag_it HF I, ST LRI and so on.
  
  The products contain JMY620 series which are the surface mounted design, can send and receive more than 256 Bytes APDU commands and also support FSDI=8; lower power consumption like JMY504; JMY601 (Integration antenna design); JMY501 (connection outside antenna via four lines); JMY505 (connection outside antenna via 50ohm coaxial cable); JMY680 (applies to some metallic around systems); MR800 (with LCD display); MR600 (inlay LED Nixie tube which with 8 bits LED display); the ID reader MR761 series which can support positive sequence, reverse output in hexadecimal or decimal UID, and can read the data in the card via configuration.
  
  Many of the above products contain one or more than one SAM card slots.
  
  At the same time, the interfaces for the reader we can offer IIC, UART, RS232C, RS485, USB (HID or PC/SC standard), Ethernet RJ45 (TCP/IP), Bluetooth and so on; and the PCD contain NXP RC500, RC531, RC632, RC400, RC522, PN512, RC523, FM1702, FM1712, FM1722; Meanwhile in order to meet the different needs of different users, we use MCU 8051, ARM7, ARM9 and ARM11 to develop the module or reader.
  
  It is worth mentioning that we also provide ODM / OEM customized products and services.
  
  Welcome to contact us, and we will provide you with the high quality products and the excellent services.
  
  Our Products:
  
  - iic uart rs232c or usb interface hf 13 56mhz rfid writer and reader module jmy680
  
  - arm7 mcu hf 13 56mhz rfid desktop reader and writer with usb pc sc interface mr810
  
  - iic uart usb interface hf 13 56mhz rfid writer reader module jmy628
  
  - hf 13 56mhz rfid reader writer lcd display with arm7 mcu mr800
  
  - jmy501 hf 13 56mhz rfid reader writer modules