Nissan Leaf Of Ev Charging Station - China

EV charging station from SETEC POWER can successfully charge Nissan

Leaf, Mitsubishi, Outlander, etc.

Chademo mode electrical cars.

Charging station consists of charging modules, monitor, digital meter, HMI,

communication module, charging connector, management and cabinet.

According to different DC output, there are 2 types.

Usually for cars output

is 450V, and electric bus is 750V.

Pls kindly refer to below datasheet.

EV

charging station is composed of the 10KW charging modules, power up to 100kw.

20KW charging station is wall mounted and 30- 100kw is stand alone.

Portable

EV charger is 10KW.

You can sell this portable charger to every car drivers!

 Integrated the charger, charging port, man- machine interface,

telecommunication, fees collecting into one;

 LCD display screen;

 water and dust proof IP 54;

 750v or 450v output voltage for bus and for cars;

 Flexible allocation and easy method of controlling;

 Meet different kinds of charging model;

• 1 - Overview:

•

• SETQCY series DC charging station is mainly used for electric vehicle

fast charging.

Products can be installed outdoors, with waterproof, dustproof

design IP54 - This DC fast charging station has charging interface, man-

machine interface, communications, billing and other parts, modular design,

easy installation, operation and maintenance and simple, and the charger with

the use of electric vehicles outdoor DC fast charge ideal choice.

• 2 - Product Features:

• 1 - Intelligent module, CPU module built intelligent management, with

manual / automatic dual control ;

• 2 - Distributed control system, a single module failure does not affect

system operation ;

• 3 - Module efficiency up to 95% ;

• 4 - Charging module has a sleep function, based on the number of

modules automatically select the size of the load current to start, so that

the module and efficient operation ;

• 5 - Charging module uses a unique full isolation dust structure, built-

in cooling fan with intelligent speed control, and can automatically adjust

the fan speed according to the load operation, to extend the life of the fan;

• 6 - Acceptable remote trip command to achieve the emergency stop

function.

• 7 - Charging module comes with APFC function, power factor of 0.99, the

total harmonic current distortion THD <5% charging

• 3 - Production Description:

• SETQCY DC quick charger consists of charging modules, monitor,

smartmeter, HMI, communication module, charging connector, management and

cabinet.

• DC Quick charging station offers Electric Vehicle owners an

opportunity to charge their car safely and quickly.

A typical electric car

with 24kWh battery pack may be charged as quickly as 20 minutes to get up to

80% of its capacity.

• different output power of EV charger, different charging speed.

• 4, SETEC charger connector:

• SETEC Power designed two models of DC quick charger connector SET-

EVD- C1 which CHAdeMO conformity.

• And SET- EVD G2 is designed for China market, which use GB/ T

standard.

• SETEVDC1 connector is to be used directly in the CHAdeMO specification

EV fast charger for electric vehicles ( EV) .

Equipped with our proprietary function, the SETEVDC1 ensures a high level of

safety required for quick chargers that transmit a considerably higher level

of electric energy than general home appliances.

This new EV quick charger

connector provides not only a high level of safety but also excellent

operability, high durability and excellent design.

•

• 5 - System Technical Data:

Name content remark

Machine Index

Full load efficiency ≥95%

OHZ~20MHz clutter VP- P 0.20%

Current unaverage in parallel ≤5%

insulation strength ( V) 2000VAC/ 50Hz 10mA, 1min No flash

off

Insulation resistance( MΩ) 10 Ground

Power Surge no Soft Start

Module load indication LED Display output DC current LED10 setion

LED10 , +3LED

Output current display accuracy ≤±10%

Communication Interface CAN2.0B

Environmental Indicators Ambient temperature - 25~55 ℃

storage: - 40~70 Celsius

Humidity ≤90% ( 40±2 Celsius) storage: 95% ( 40±2 )

Altitude 1500m derating use when it is above 1500m

Electromagnetic Compatibility EN55022 CLASS A ( YD/ T983- 1998) A

grade

Input indicators Line Voltage( VAC) 380

Voltage Type AC three- phase four- wire

Frequency( HZ) 45~55

Power Factor 0.99

Current THD value ≤5%

Input undervoltage protection value( V) 323±5V

Output Indicators Nominal output voltage( V) 700V

Output Current( A) 0~100A

Regulation accuracy ≤0.5%

steady current accuracy ≤1%

Ripple Peak factor ≤0.5%

The output voltage range( V) 600~750V

Short circuit current( A) ≤30A Single Module

Output Power 0kW~50kW

Mechanical indicators packaging Wooden packing

Dimensions( W×H×D) 544×88×430( Rectifier module)

2260×600×600( System Cabinets) mm

Module weight 13Kg

System Weight <160Kg

protection grade IP21

other Parallel Extensions ≤6 The number of modules operation in

parallel

Cooling Air Cooled Load, temperature joint control

• SETEC Power Co.

, Ltd

• Mobile: ( 86) 134 2515 7873

Company Contact:

• Posted By: setec power

• Phone: 8613425157873

• Address: 199 setec xili Town shenzhen China, shenzhen , China

• Email:

• Website: https://www.setec-power.com

• Business Description: EV charging station from SETEC POWER can successfully charge Nissan
  
  Leaf, Mitsubishi, Outlander, etc.
  
  Chademo mode electrical cars.
  
  Charging station consists of charging modules, monitor, digital meter, HMI, communication module, charging connector, management and cabinet.
  
  According to different DC output, there are 2 types.
  
  Usually for cars output is 450V, and electric bus is 750V.
  
  Pls kindly refer to below datasheet.
  
  EV charging station is composed of the 10KW charging modules, power up to 100kw.
  
  20KW charging station is wall mounted and 30-100kw is stand alone.
  
  Portable EV charger is 10KW.
  
  You can sell this portable charger to every car drivers!