Portable E1 Datacom Transmission Analyzer - Canada

Portable E1/Datacom Transmission Analyzer This E1/Datacom transmission

analyzer is designed for performing comprehensive analysis, measurement

and evaluation of telecom networks.

It performs E1 frame data monitoring

and analysis, dual E1 channel testing, loop delay, APS delay, pulse

measurement, jitter measurement, signal level measurement.

It also has

many enhanced test functions such as 'PCM Simulator', 'Mux/Demux', 'Drop

& Insert' and 'Network Tools'.

It is widely used in R&D, production,

installation, verification and maintenance of SDH, PDH, PCM, DTU and

Data protocol converter equipment.

Key Features – Portable E1/Datacom

Transmission Analyzer Easy-to-use, handheld design Full-featured

measurements to E1, Datacom and uniqueIP PING testing from Datacom Large

color touch screen with high resolution Smart menu navigation Extensive

error and alarm generation, detection and indication Save/Recall of up

to 10 user-defined configurations and 10 groups of results Built-in Li-

ion rechargeable batteries and AC power supply as well Test results can

be uploaded, conserved and printed by Test Manager Pro software Basic

Functions – Portable E1/Datacom Transmission Analyzer E1 Testing 120

Ω balance and 75 Ω unbalance line interfaces HDB3 and AMI line

codesOut-of-service framed and unframed testing 2 Mb/s, 64 Kb/s BER

testingFrame data and alarm monitoringClock slip measurementIn-service

framed and unframed testing Hi-Z and through mode testingCODE, FAS,

CRC4, E-BIT BER testingFrame data and timeslot activity

monitoringMonitoring of octet code in any selected timeslotBuilt-in 64

kb/s tone channel monitoring capabilityABCD code monitoring in CAS

signalingTS16 monitoring in CCS signalingDouble E1 channel testing

Double E1 channels Rx Hi-Z and through mode testingDouble E1 channels

Code, FAS, CRC-4, E-BIT BER testingDouble E1 channels FAS/NFAS, CAS Multi-

frame, CCS timeslot 16 and timeslot activity monitoringDouble E1

channels timeslot data monitoringDouble E1 channels built-in 64 kb/s

tone channel monitoring capabilityDouble E1 channels CAS and CCS

signaling monitoringRound trip delay measurement APS delay measurement

Pulse Mask Measurement Input E1 pulse shape displayPulse width

measurementPulse width and amplitude ratio measurementUp-edge and down-

edge time measurementOvershoot and undershoot ratio measurementPulse

amplitude and level measurementPCM simulator Extensive error insertion

and alarm generatioFrame data control and monitoringIdle word insertion

in one or more timeslots with programmable patternVF tone generation and

measurement in one or more timeslotsListen to any voice channel in the

receiver via earphoneTalk to any voice channel in the transmitter via

microphonePerform the tests of signal level and frequency of the VF

channel simultaneouslyCAS and CCS signaling generation and

monitoringFrequency and Offset measurements Level measurement Transmit

clock deviation up to 999ppm Clock source: Internal, Interface and

External 2 M clock/signal Testing pattern: PRBS, Fixed Code, 16-BIT User-

programmable word Error insertion: Single and Fixed Rate Real-time

transmit circuit status indication: open/short Manual or auto-timer

measurementsPerformanc e analysis according to G.

821, G.

826, and M.

2100

Network TestingIP PING Trace Route IP Config Other FunctionsAuto-

configuration: E1 frame format, BERT pattern, the timeslots carried BERT

pattern automatic detection and setting for E1 testingBERT pattern and

Tx data rate automatic detection and setting for Datacom testingBERT

pattern and octet timing automatic detection and setting for G.

703 64

kb/s CO testingReal-time clock Error insertion: Single and Fixed Rate

Reset the results to zero and auto configure Manual or auto-timer

measurements Self-check, keyboard and LED testing Performance analysis

according to ITU-T G.

821, G.

826 and M.

2100 Histogram analysis of error

and alarm events Upgradeable software via USB interface Optional

FunctionsOption 1: Jitter Testing Peak-to-peak jitter measurementJitter

measurement comply with O.

172 filterHit seconds and hit free seconds

countsOption 2: Datacom Testing Datacom (V.

24, V.

35, V.

36, X.

21, RS-449,

RS-485, EIA-530 and EIA-530A) BER testingAsynchronous BER testing at a

baud rate range of 50 b/s to 57.6 b/sSynchronous BER testing at a data

rate of 1.2 kb/s to 2048 kb/sDTE or DCE equipment emulationSynchronous

clock source selectableFrequency measurementHandshaking signals control

and monitoringOption 3: G.

703 64 kb/s CO Testing G.

703 64 kb/s Co-

directional BER testingOctet timing control and monitoringFrequency and

offset measurementTransmit clock source: Internal and InterfaceOption 4:

Mux & Demux Testing E1-Datacom synchronous 64 kb/s, N¡64 kb/s BER testingE1-

G.

703 CO synchronous 64 kb/s BER testingFrequency and Offset measurement

of Rx interfaceHandshaking signals monitoring of Datacom interfaceE1

framed data and alarm monitoringOption 5: Drop & Insert Testing Insert

mode: Insert synchronous 64 k, Nx64 kb/s data from Datacom or G.

703 CO

interface to one or more timeslots of E1 signalDrop mode: Drop one or

more timeslots data from E1 signal to Datacom or G.

703 CO

interfaceInsert Drop mode: Insert and drop one or more E1 timeslots data

from or to Datacom or G.

703 CO interfaceTechnical Specifications –

Portable E1/Datacom Transmission Analyzer E1 Testing Internal Clock 2048

kb/s 10 ppm Line Interfaces 75 Ω (Unbalanced) 120 Ω (Balanced)

High Input Impedance>2 kΩ Line Code HDB3, AMI Frame Type

Unframed, PCM30, PCM30CRC, PCM31, PCM31CRC Tx Clock Source Internal,

Interface and External 2 MHz clock or HDB3 signal Pulse Mask Measurement

Comply with ITU-T G.

703 recommendations Jitter Measurement Comply with

ITU-T G.

823, O.

172 recommendations

G.

703 64 kb/s CO Testing

Line Rate 64 kb/s ± 100 ppm

Line Interface 120 Ω, Balanced

Line Code AMI

Datacom Testing

Line Interfaces V.

24, V.

35, V.

36, X.

21, RS-449, RS-485, EIA-530, EIA-530A

Data Rate ASYNC: 50 b/s to 57.6 kb/s

SYNC: 1.2 kb/s to 38.4 kb/s, Nx64 kb/s (N=1 to 32)

Datacom Device Mode DTE, DCE

Ethernet Testing

Working Mode Full duplex, 10/100M compatible

Error Insertion Type: BIT, FAS, CODE, CRC4, E-BIT

Mode: Single, OFF

Others

Display 4.3 inch large size display with backlit color touch screen

Rechargeable Battery Li-ion battery, continuous working for 4 hours

Recharge Time Approx.

2 hours

Power Supply AC Adapter:

Input: 100 V to 240 V AC, 50/60 Hz

Output: 12 V DC /1.5 A

Battery: Li-Ion battery

Test Manager Pro Software Operating System: WIN98/ME/2000/NT/XP

Operating Temperature 0 °C to 50 °C

Storage Temperature -30 °C to 70 °C

Humidity 5% to 95% non-condensing

Dimensions 233 mm × 110 mm × 64 mm

Weight Approx.

800 g

Packing List – Portable E1/Datacom Transmission Analyzer

E1/Datacom Transmission Analyzer 1 set

E1 75Ω Unbalanced Test Cable 2 pcs

E1 120Ω Balanced Test Cable 1 pc

USB Communication Cable 1 pc

Charger 1 pc

Li-ion Rechargeable Battery (Built-in) 1 pc

Test Manager Pro Setup CD 1 pc

User's Manual 1 pc

Waterproof Package 1 pc

Quality Certificate Card 1 pc

Maintenance Card 1 pc

Packing List 1 pc

Option Cable

Datacom Adapter Cables 4 pcs

Datacom Interface Loop-back Connector 1 pc

G.

703 CO Test Cable 1 pc

Order Information – Portable E1/Datacom Transmission Analyzer

A0020003 E1/Datacom Transmission Analyzer (option excluded)

Option 1 Jitter Testing

Option 2 Datacom Testing

Option 3 G.

703 64 kb/s CO Testing

Option 4 Mux & Demux Testing

Option 5 Drop & Insert Testing

Portable E1 Datacom Transmission Analyzer

Thank you in advance for your consideration

Company Contact:

• Posted By: GAO Tek Inc.

• Phone: 4162920038

• Address: 601 Milner Avenue, 3rd Floor, Toronto , ON , Canada

• Email:

• Website: https://gaotek.com

• Business Description: involved in international trade import export of goods, products, and services