Filament Wound Tubing Epoxy Fiberglass Roll Bushing - China

tianze FUSESTUBEcom make FILAMENT WOUND tubing Hi-temp filament wound products.

Resins include epoxies, vinyl esters & polyesters with glass, including round, radomes for antennas, drive shafts, fuse tubes, gas couplings, light weight rolls for paper & plastic markets, & other aerospace, military, & chemical process industries Composites filament-wound, Filament-wound (filament winding) fiberglass tubes and fiberglass tubing provide a very high strength-to-weight ratio, excellent electrical insulation properties and high resistance to corrosion.

Special resin formulations and filament winding patterns have been developed to meet

applications such as: Filament wound tubes have exceptional inter-laminar shear strength and can be machined to very close tolerances.

Tubes weighing half as much and with equal strengths as similar size aluminum tubes may have 33% thinner wall thickness.

Glass/epoxy resin ratios, winding tensions, and pre-determined winding angles provide exceptional directional strength properties.

Various epoxy resin formulations are available with 135°C, 155°C, 180°C, 200°C and cryogenic continuous use ratings.

Tubes can be made with ID’s as small as .

187” and as large as 48” Dia.

Standard lengths are 48”, 90” and 96”, depending on the ID size and some sizes can be made in longer lengths.

.

Common Applications for Machined Filament Wound Tubes: Antennas, Impeder Tubes, Switch Insulation, Waste Water, treatment, Cylinder Tubes, Bearings, Fuse Tubes, Cryogenic Pipe, Bushing Liners, Battery Casings, Cryogenic Neck Tubes, Frac Plug Components, Propellant Tube, Munition Bodies, Launch tubes, Glass/epoxy filament wound tubes offer excellent resistance to weather, ultraviolet radiation, temperature extremes and moisture.

Composites made from glass/epoxy are also excellent electrical insulators, are nonmagnetic and will not interfere with radar or radio frequency signals.

Lamitex glass/epoxy filament wound tube composites, with few exceptions are more resistant to chemical corrosion than stainless steel, monel and titanium　WHATapp: +８� �－１５９５００４ ２２０９

Company Contact:

• Posted By: fuses tube heat shrink tubing PTFE PET Manufacturers Suppliers

• Phone: 15950042209

• Address: south dongwu road 173, SUZHOU , China

• Email:

• Business Description: well electric suppling the electrical industry with quality insulating products.
  
  as vulcanized fiber sheet vulcanized fiber tubes, SNTHETIC FUSE TUBE LINER , filament wound tube , bone fiber liner , G5/G9 Tubes Melamine, CE Phenol insulation Tube, G10 FR4 G11 FR5 Tubes , FR4 , GPO3, SMC laminate sheet, Heat Shrink Tubing and Sleeves , Teflon Tubes high-performance heat shrink tubing in a variety of polymer resins including PTFE, FEP, PFA, ETFE, PET, PEEK; and PTFE / FEP and PTFE / ETFE Dual-Shrink, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire Teflon Sleeving , PTFE Teflon Heat Shrink , FEP, PVDF, PFA, FEP, XR-H PE, shrinkSleeving, Silicone Fiber Glass Braid Sleeving, Teflon Bellows , Laminated tubing phenolic laminated tube, G7 Tubes Glass Reinforced Silicone , d SHEET, Phenolic Paper Tubes, Laminated plywood, Plywood strips , Moulded plywood, Pressure Plates, yokes, clamp plate, blocks Duct spacings , Angle rings, caps snouts , Corner Collars, Corrugated Board, L Profiles Frames, Pressure Plates, Spacers, U Channels shape, Static rings acer Rings, Spacer Strip, Varnished Insulating Tube rods Transformer Bushing etcs we will be able to advise on the best solution and manufacturer to your specifications .
  
  its are fit IEC / ANSI standard look wellelecCOM , ALLINSULATINGcom, EM SALEFIBERatYAHOOcom