Trench Mesh Reinforcement For Footing Slab Construction - China

Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers

Mesh For Footing Slab

Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire

It divided the shape: trapezoid, triangle, two bars and three bars welding.

The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam.

Specification of trench mesh reinforcement

Surface treatment: galvanized or drawn wire

Material: R250N, D500N, D500L, D300E, D500E

The Tensile strength is 300Mpa.

The trench mesh was produced by standard AS NZS 4671-2001

Width: 0.2m - 2.3m

Length: 6m

REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH

Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG

L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8

L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2

L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6

L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9

L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9

L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72

L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13

L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7

L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3

L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8

L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34

L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1

L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3

L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8

L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3

L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8

L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 And Alls of using is accordance to AS NZS 2870-2011.

1 - Footing slap

The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments.

The New Zealand Standard Reinforcement Mesh is used on bottom reinforcement.

The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different.

2 - Waffle rafts beam and piers

The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft:

(a).

pier to be located on the intersection of every third internal beam.

(b).

An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.

Company Contact:

• Posted By: Anping Heyou Wire Mesh Products Co.Ltd

• Phone: 86-311-80768128

• Address: Chang'an District, Shijiazhuang , Hebei , China

• Email:

• Website: https://www.reinforcedsteelmesh.com/

• Business Description: Heyou Wire Mesh was established in 2009 year, which is a professional manufactory for reinforcement mesh, reinforcing mesh, reinforced mesh.
  
  Heyou Wire Mesh can produce National Standard reinforcing mesh, Australian/New Zealand Standard AS-NZS4671-2001 Reinforcement Mesh, British Standard BS4483 fabric reinforcement/reinforced mesh, Osterreichische Norm B4200-7 Grids and reinforcing meshes, Germany Standard DIN488 SD Reinforcing Mesh, Normes Francaises NFA35-016 Steel Rebar Mesh and Swiss Standard SIA 16211 S550 Reinforcement Wire Mesh.
  
  Our production capacity is 2000tons per month.
  
  Heyou factory has 8 workshops and covers 20000sqm area, with advanced international standard production line and equipments.