Polypropylene Synthetic Fiber - China

PP Plastic Fiber Polypropylene Synthetic Fiber

Material: 100% Polypropylene

Colour: white

Melting Point: From 165 to 175 degrees Celsius

Fiber Length: 25mm, 30mm, 50mm, 65mm Polypropylene Synthetic Fiber

Polypropylene synthetic fibers such as polypropylene fibers made from propylene, a by-product of petroleum refining.

It is a concrete fiber made from propylene as raw material by polymerization and melt spinning.

Polypropylene staple fiber is a kind of fiber, polypropylene staple fiber can very well improve the mortar/concrete crack resistance, impermeability, impact resistance, frost resistance, anti-blast ability and improve the concrete compatibility.

Tens of millions of fibers are evenly distributed in the mortar/concrete, which plays a good role in micro reinforcement, thus well maintaining the integrity of the structure, avoiding the structure from being scattered into many pieces when it is damaged by impact, preventing the corrosion of reinforcement in the structure, greatly extending the service life of the project and reducing the maintenance cost of the project.

The main function of polypropylene fiber

1 - Improve the fire resistance of concrete; 2 - Improve the durability of concrete, anti-aging properties; 3 - Improve the impact resistance, bending resistance, fatigue resistance and earthquake resistance of concrete; 4 - Improve the freeze-thaw resistance of concrete; 5 - Improve the penetration resistance of concrete; 6 - Prevent concrete cracks.

Technical parameters-sheet 1

Material 100% Polypropylene

Use CONCRETE

Density 0.9 g/mL at 25 °C(lit.

)

Melting Point 189 °C(lit.

)

Fiber Length 3mm

Elastic Modulus 3500

Tensile Strength 550Mpa

Ignition Points 160-180

Elongation At Break 10% Min

Acid, Alkali & Salt Resistance Strong

Place of Origin China, Shandong

Brand Name jinhongyao

Product name polypropylene fiber

Application Concrete Road

Shape Curved

Type Monofilament Pp Fiber

Melting Point 160 - 170

Elastic Modulus 3500MPa

Tensile Strength 450MPa

Ignition Points 280-350

Elongation At Break 15%-25%

Acid, Alkali & Salt Resistance 95% Strong

If the polypropylene concrete fiber parameters you need are not available here, please contact us and we will get back to you as soon as possible.

Technical parameters-sheet 2

Name Concrete fiber

Material polypropylene plastic fiber

colour white

Melting Point From 165 to 175 degrees Celsius

Fiber Length 25mm, 30mm, 50mm, 65mm

Tensile Strength >=690Mpa, More than 250 mpa

Min order 1TON

Transport information Size 60mm*40mm*20mm Gross weight 1kg Delivery time 5

Sample quantity for each time 5 20kg package paper box plastic box

Customized service LOGO customized accept accept Outside package customized accept accept Picture customized accept accept Application areas of polypropylene fiber

1 - Cement mortar interior (exterior) wall painting, aerated concrete plaster, interior decorative putty and insulation mortar.

2 - Anti-explosive, fire-resistant projects human defense military engineering, oil platforms, chimneys, refractory materials, etc.

3 - Shotcrete tunnel, culvert lining, thin-walled structure, slope reinforcement, etc.

4 - Concrete rigid self-waterproof structure basement floor, side wall, roof, roof cast-in-place floor, cistern, etc.

Crack resistance, impact resistance, abrasion resistance, demanding projects, water conservancy projects, subways, airport runways, port terminals, overpass viaduct decks, piers, extra-long structures, etc.

Applications of polypropylene synthetic fiber

PP plastic fiber is used in anti-cracking putty powder, insulation mortar, concrete, building engineering level, wall, floor, pool, basement, and access bridge project, with anti-cracking and anti-permeability, wear resistance, improve toughness, improve impact, explosion-proof, also has a tear resistance, improve the old and new interface bonding force.

Shandong Jinhongyao mainly produce PP fiber, PVA fiber and other concrete fibers, and we are very pleased to reach cooperation with you.

Company Contact:

• Posted By: Shandong Jinhongyao Engineering Materials Co., Ltd.

• Phone: 15169889082

• Address: Yangli Street, Laiwu Driect, Jinan , Shandong Sheng, China

• Email:

• Business Description: Shandong Jinhongyao Engineering Materials Co., Ltd. is located at the foot of Mount Tai; it is adjacent to the spring city of Jinan in the north, and the hometown of Confucius and Mencius in the south; it is in Bole, Tailai, and Jinan-Qingdao highway passing by, with convenient transportation and extending in all directions.
  
  The company integrates product research, development, design, and manufacturing.
  
  It has strong technical force and a complete range of products.
  
  It has established close cooperative relations with many scientific research units, universities, and design institutes across the country.
  
  The company mainly produces PP fiber , PVA fiber , steel fiber JK-7 spiral polyvinyl alcohol fiber, copper waterstop, copper waterstop, copper waterstop, The production and sales of copper sheets, T2 copper strips, and copper plates have the characteristics of high strength, long life, corrosion resistance, and aging resistance.
  
  Their products are mainly used in infrastructure projects such as water conservancy, railways, tunnels, landfills, artificial lakes, etc.
  
  , Have been unanimously praised by users and experts.
  
  Has won a good market reputation.