Flooring Panel - China

CANEX Birch Plywood for Flooring Base This birch plywood is used to make

multi-layer composite flooring, it can be platform (cross band without

f/b veneers) or with f/b veneers.

Material for this plywood is

recommended with birch, eucalyptus, pine or poplar etc.

Due to its

strict requirement on quality, we take care of each step from choosing

material till delivery, so our quality is 100% ensured! Do not worry

about the moisture content of our plywood, we give drying to each veneer

and keep the rate being within 10% for finished products!

T&G (Tongue & Groove) Plywood

The tongue and groove joint is widely used for re-entrant angles.

The effect of wood shrinkage is concealed when the joint is beaded or otherwise moulded.

In expensive cabinet work, glued dovetail and multiple tongue and groove are used.

Tongue and groove or T&G is a method of fitting similar objects together, edge to edge, used mainly with wood: flooring, parquetry, panelling, and similar constructions.

Tongue and groove joints allow two flat pieces to be joined strongly together to make a single flat surface.

Before plywood became common, tongue and groove boards were also used for sheathing buildings and to construct concrete formwork.

Characteristics:

CANEX T&G (Tongue & Groove) Plywood is considered easy T&G's tongue and groove is designed to:

• Enable fast, problem-free installation

• Prevent buckling by accommodating panel expansion due to moisture changes

• Prevent wedging action that exert damaging splitting forces

• Accommodate field applied adhesives

• Provide a uniform, ridge-free surface

Applications:

Floor and heavy roof sheathing for residential, commercial and industrial construction.

Storage and Handling

The CANEX T&G profiles are sturdily built and designed to engage even when wet.

But dry, undamaged panels install faster and easier, so maximize the time you can save by following these suggestions on the job site:

Cover plywood bundles with plastic or tarp.

Use three supports as dunnage to prevent sagging.

Engineered Flooring

Engineered Flooring with Wood Veneer, Big Bevel Maple and Three-layer Base

Engineered wood, too, is real wood.

It is a sandwich of 1/16' to 1/8' of finish wood on top and non-finish plywood underneath.

It's actually better to have plywood underneath.

The middle layer of plywood is laid cross-ways to the finish layer, providing additional strength to the flooring.

So, what you're looking at is 100% genuine wood.

Characteristics:

The advantage of engineered wood flooring versus laminate is that engineered wood can be sanded after scratches and dings develop.

Two catches, though:

·Limited Sanding - Engineered flooring cannot be sanded more than 1-3 times (depending on the thickness of the finish layer).

Professional Sanding Recommended

Because of the low tolerance for failure with sanding engineered wood, I seriously recommend that you have a professional do the sanding.

It is very easy to gouge your engineered wood floor, revealing the plywood underneath.

Key Specifications/Special Features:

Material: white oak wood

Tongue and groove: big bevel

3-layer base with wood veneer

Smooth

Thickness: 8 to 21mm

Width: 70 to 200mm

Length: 300 to 1, 830mm

Flooring Panel

Thank you in advance for your consideration

Company Contact:

• Posted By: CANEX Birch Plywood Co.

• Phone: 862288385862

• Address: CHONGQING , Tianjin , China

• Email:

• Business Description: As a leading manufacture of birch plywood, we serving users of birch plywood and other wood products since 1998; our team of professionals has years of experience in the wood products industry.
  
  We can get the right product for your application; because our Birch Plywood Industry is independently owned and operated, we can be flexible in our policies and procedures.
  
  This gives us many options when it comes to servicing our customers.
  
  Because of well taken development strategy became the major exporter of Birch Plywood and other plywood products in EU market.
  
  In addition we export to Middle East, North America and Asian countries.
  
  By taking advantage of the best characteristics of birch and other material, our modern production methods as well as the knowledge and experience of our customers; our aim is to build long term partnerships with our customers.
  
  With their support, we aim to maximize the potential of our business, through a combination of enhanced quality of service, quality of goods, creative marketing, competitive pricing and cost efficiency.
  
  At the same time, we'll pursue profitable growth by migrating our customers to reliable products and services.
  
  Our corporate identity defines the kind of company we are now and the one we need to be in the future.
  
  Canex's mission is to be the premier resource of choice for product and service solutions to targeted wood markets.
  
  We will also continue with this principle, continue to promote ourselves to service you better and better.