Astm A335 P11 Alloy Steel Pipe - China

ASTM A335 P11 is the part of ASTM A335, the pipe shall be suitable for

bending, flanging, and similar forming operations, and for fusion

welding.

The steel material shall conform to chemical composition,

tensile property, and hardness requirements.

Each length of pipe shall

be subjected to the hydrostatic test.

Also, each pipe shall be examined

by a non-destructive examination method in accordance to the required

practices.

ASTM A335 P11 alloy steel pipe

The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.

Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Outer Dimensions: 19.05mm -114.3mm

Wall Thickness: 2.0mm - 14 mm

Length: max 16000mm

Steel grade: ASTM A335 P11

Packing:

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test.

Surface treatment:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.

Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

ASTM A335 P11 Chemical Compositions(%)

Compositions Data

UNS Designa-tion K11597

Carbon 0.05-0.60

Manganese 0.30-0.60

Phosphorus(max.

) 0.025

Sulfur(max.

) 0.025

Silicon 0.50-1.00

Nickel …

Chromium 1.00-1.50

Molybdenum 0.44-0.65

Other Elements …

Mechanical properties for ASTM A335 P11

Properties Data

Tensile strength, min, (MPa) 415 Mpa

Yield strength, min, (MPa) 205 Mpa

Elongation, min, (%), L/T 30/20

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

A / N+T

N+T / Q+T

N+T

Mechanical Tests Specified

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test

For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot.

For small lots, at least one pipe shall be tested.

For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Hardness Test:

P11 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].

Notes for Bend Test:

For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.

Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.

The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Company Contact:

• Posted By: Sunny Steel Tubosacero ltd.

• Phone: 862133780199

• Address: No.273, Siping Road, Shanghai , Shanghai , China

• Email:

• Website: https://www.sunnysteel.com

• Business Description: Sunny Steel provide a wide range of steel products as Steel pipes,
  
  Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite
  
  steel pipe used in the construction industry.
  
  We provide a wide range of steel products used in the construction industry:
  
  Steel pipes
  
  Seamless tube
  
  seamless pipes
  
  Alloy pipes
  
  Pipe fittings
  
  Composite steel pipe
  
  Contact us today to arrange a quote or estimate.
  
  Our steel fabrication products are real trusted and most affordable choice.
  
  Factory and industrial products
  
  In addition to our steel products for construction, we also offer a variety of steel fabrication products for use in industry.
  
  We provide local factories with steel cutting, fabricating, and distributing pipe fittings anc composite pipes.
  
  Our versatility ensures we will be able to provide you with the steel products you require to to complete a project, from start to finish.
  
  Contact us today to arrange a quote or estimate
  
  As a long established steel fabrication company in China, we can be trusted to deliver what you need, in the time you need it.
  
  We understand that in the construction industry time frame is often important.
  
  Whilst providing a quality, trusted service, we also place a high premium on quality craftsmanship.
  
  Our steel products are long lasting, and always meet our clients exact specifications.
  
  Our team
  
  Our team are highly trained and experienced in servicing and producing all types of steel supplies.
  
  Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.
  
  Call us today to discuss your project's needs and find out what options are available.