Samsung 5260 Development Platform - China

Brief introduction:

CUP: Samsung Exynos 5260, based on 6 core processor: dual- core Cortex- A15 + quad- core Cortex- A7, the Cortex- A15 frequency is up to 1.7 GHz and supports 32 KB ( Instruction) / 32 KB ( Data) Cache and 1MB L2Cache; Cortex- A7 frequency is 1.3 GHz and supports 32 KB ( Instruction) / 32 KB ( Data) Cache and 512 KB L2 Cache

Hardware:

  CPU: Samsung Exynos 5260, six- core processor: dual- core Cortex- A15+quad- core Cortex- A7 - Cortex- A15 frequency is up to 1.7GHz, supporting 32KB( Instruction) / 32KB( Data) Cache and 1MB L2 cache; Cortex- A7 is 1.3GHz, supporting 32KB( Instruction) / 32KB( Data) Cache and 1MB L2 cache.

This processor supports dual- channel 32 LPDDR3/ DDR3（1600Mbps）

  3D Accelerator: ARM Mali- T628 MP3 Core

  Memory: 2GB DDR3

  eMMC: Standard 16GB eMMC, optional 4GB、8GB、16GB� �€32GB eMMC

  PMIC: Samsung S2MPA01, with 10- channel DC/ DC and 26- channel LDO output power, intelligent and low power consumption

  3G: HUAWEI MU509B Module

  WiFi: Standard 802.11b/ g/ n

  GPS: The highest sensitivity, - 165dBm tracking sensitivity, - 148dBm capture capacity

  Bluetooth: Onboard Bluetooth module, supporting 2.1 + EDR protocol

  MIPI Camera interface: 2- channel MIPI- CSI Camera, standard with Samsung 800- megapixel camera module

  USB 2.0 HOST: 1- channel, through USB HUB, 4- channel USB 2.0 HOST interface which can extend to 8- channel USB 2.0 HOST Interface

  USB HSIC: 1- channel HSIC signal

  USB 3.0 HOST: 1- channel USB 3.0 HOST/ Device interface, supporting SS ( 5Gbps)

  SD/ HSMMC: 1- channel SDIO 3.0, 2- channel SD2.0 for EMMC and MMC/ SD, with a SD / MMC card slot

  UART: 4- channel UART interface at 115200bps baud rate, for connection with GPS, print debug information, etc

  eDP interface: eDP interface,  standard 9.7 inches display screen, the maximum resolution up to 2560* 1600

  MIPI interface: Reserved MIPI screen interface, the maximum resolution up to 1920 * 1200

  Ethernet: 1- channel 10M/ 100M cable interface

  Audio: Wolfs selection WM8976, audio input / output, with audio output amplifier, which can be accessed in speaker

  HDMI: HDMI 1.4 ( 1080P/ 60Hz)

  Function keyboard: Power button, reset button, interrupt key, etc

  LED: 2 GPIO controlled LED

  Acceleration: ±2g to ±16g, I2C interface

  Gyroscope: 16bit ADC, I2C interface

  Battery: Round lithium battery ( 3V) for RTC,

  Power: 12V/ 3A DC power supply with the power switch and indicator light

  Core board interface socket: 0.635mm chip socket of Molex, stable and reliable

  Expansion interface: Elicits a signal based on the user' s needs, including C2C, EF- NAND, EBI Port connector, etc

Software:

  Operating system: Google Android 4.4.2

  Linux Kernel: Linux 3.4.39

  Bootloader: U- boot 2012.07

  Terminal: DNW V1.01( XP) , Minicom( Ubuntu)

  Cross compiler: Arm- 2009q3 ( gcc 4.4.1)

  File system: Ramdisk, Ext4

  GUI: Android 4.4.2

  WiFi module: Supports 802.11b/ g/ n

  3G module: 3G driver for web browsing, message sending and receiving

  Bluetooth module: Supports Serial Bluetooth Driver( RDA)

  Camera module: Supports MIPI Camera driver and functions include preview, photographs, video, etc ( S5K3H7 camera module)

  GPS module: Supports SIF Ⅲ

  Ethernet module: 10M/ 100M adaptive network port driver and Ethernet function

  HDMI display: Supports HDMI output for both picture and sound

  Audio driver: Supports external amplifier and headphone

  LCD display: Supports 9.7- inch LCD display

  TOUCH driver: Supports multi- point capacitive touch

  I2C driver: For Audio, Camera, HDMI, PMIC

  USB HSIC driver: Host driver, supporting mouse, keyboard, U disk, Bluetooth, etc

  USB OTG driver: Host function for USB devices like USB external mouse; Device function for  ADB and MTP

  USB 3.0 driver: HOST/ Device driver

  Keypad driver: Modified sound volume ( 2 buttons) , the reset button ( 1 button) , the terminal button ( 1 button)

  MMC driver: Supports high- speed SD/ MMC card and SDIO card

  MFC driver: Multi- Format Video Codec

  UART driver: Serial communication

  JPEG driver: JPEG codec

  2D driver: 2D hardware acceleration

  3D driver: 3D hardware acceleration ( Mali- T628 MP3)

  FIMC driver: Supports V4L2 video image processing

  GPIO driver: Provides an interface to connect external GPIO and interrupt

  IRDA driver: Supports serial IR

  RTC driver: Supports real- time clock

  G- Sensor driver: Supports gravity sensor drive

  SPI driver: Supports SPI protocol

  Operating system: Linux 3.4.39

  File system: Ext4

  GUI: QT4.8.5

  Audio driver: Supports Audio play

  Touch driver: Supports single- point capacitive touch

  I2C driver: For audio communication

Company Contact:

• Posted By: Shenzhen Haitianxiong Electronic Co., Ltd

• Phone: 862885123126

• Address: 4th Floor, Sangtai Building, Lishan Road,Taoyuan Street, Nanshan District, Shenzhen,China., Shenzhen , China

• Email:

• Website: http://en.nrisc.com/qiye/

• Business Description: Shenzhen Haitianxiong electronic Co., Ltd., established in 2008, is a high-tech enterprise integrating R&D, production and sales of embedded system products.
  
  It owns an experienced development team full of skills, innovation and passion.
  
  Haitianxiong has two departments: the embedded business department and the teaching equipment department.
  
  The embedded business department provides embedded solutions for enterprises from various industries, including consumer, medical treatment, industrial control, communication, finance and many other areas.
  
  We established firmly cooperation with world renowned manufactures from over 30 countries due to our OEM and ODM services which are based on profound industry background and characterized by high quality.
  
  The teaching equipment department focuses on R&D of embedded teaching platform and IoT teaching platform.
  
  The teaching equipment we launched is the integration of mature product solution and advanced technologies including embedded technology, wireless communication technology and sensor technology.
  
  We have already collaborated with many universities to foster embedded IoT talents with practical skills.
  
  It is our permanent pursue to provide high-quality products and sincere service.
  
  It is our continuously effort to develop high-tech products and thorough solutions.
  
  It is our genuine wish to promote development of embedded system with you, our client and partner.