24 Port Asterisk Analog Telephony Pci Card Fxo Fxs - China

SinoV-1600P is a 16 fxs/fxo PCI asterisk card

SinoV-2000P is a 20 fxs/fxo PCI asterisk card

SinoV-2400P is a 24 fxs/fxo PCI asterisk card

SinoV-2400P PCI card is a 16-24 port FXS/FXO analog Asterisk

PCI card which is mainly applied to PSTN environment.

It

supports all the functions of Asterisk PBX systems

needed.

* High security: It adopt tertiary thunder preventing

technology, can prevent the thunder and lightning from

striking effectively.

* World Wide Usable: Configurable line interface to meet

global telephone line interface requirements.

* User could choose any of combinations of FXO_200 or

FXS_200 modules according to their requirements.

* 32 bit bus master DMA data exchanges across PCI interface

at 132Mbytes/sec for minimum host processor intervention.

* The high stability firmware is exported / imported with

DMA data exchange, so it accelerated and reduced CPU load

greatly.

Under the environment of the same hardware, CPU

rate of utilization is equal to CPU rate of utilization of

using 4 port analog card.

* It supports all the functions of Asterisk PBX systems

* Humanization is designed: The module socket that should be

nipped is all

adopted and stuck to one slice of sockets, can prevent

stabing users finger

effectively.

now function:

* Easy to install , this card can use all same as DIGIUM

company TDM800P

* if use Trixbox/Elastix/Freeiris2 IPPBX software, can

automatic recognition our cards , not neet to install any

drivers.

Product Spotlight

SinoV-2400P is a new analog card.

It can be used for

connecting analog telephones and analog POTS lines through a

PC.

It delivers the superior voice quality on both FXO and

FXS interfaces in all 16 ports.

· Adjustable Interrupt Routing Design

· Interrupts Frequency Adjustment

· Up to 16 Simultaneous PSTN Calls (Per PCI Slot)

· Compatible with All Commercially Available Motherboards

· 3-Month “No Question Asked” Return Policy

· Lifetime Warranty

Overview

SINOV-2400P is a new generation analog card with

interchangeable FXS_200 and FXO_200 modules.

It can

eliminate the requirement for separate channel banks or

access gateways.

The SINOV-2400P contains 12 module banks.

Each bank supports

one analog interface.

The module banks may be filled with up

to FXO_200 or FXS_200 modules enabling the creation of any

combination of ports.

Scaling of an analog card solution is

accomplished by simply adding additional cards.

SINOV-2400P works with Asterisk®, Elastix®, FreeSWITCH™, PBX

in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well

as other Open Source and proprietary PBX, Switch, IVR, and

VoIP gateway applications.

Target Applications

· Channel Bank Replacement / Alternative

· Small Office Home Office (SOHO) applications

· Small and Medium Business (SMB) applications

· Gateway Termination to analog telephones/lines

Services and Features

· Caller ID and Call Waiting Caller ID

· ADSI Telephones

· Loopstart Signaling Support

Technical Specifications

· Up to 24 ports through a combination of FXS_200 and

FXO_200 modules

· Full-length analog card

· Up to 2 quad FXS or FXO modules

· RJ45 connector

· 32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible

with all commercially available motherboards, and proper

sharing of PCI interrupts

· 32 bit bus master DMA data exchanges across PCI

interface at 132 Mbytes/sec

· Autosense compatibility with 5 V and 3.3 V PCI busses

compatible

· Power: 8.21W Minimum, 88.24W Maximum at 3.3 V or 5 V.

· Operation temperature: 0°C to 50 °C

· Storage temperature: -40°C to 125°C

Operating Systems

· Linux (all versions, releases and distributions from 1.0

up)

Minimum Hardware Requirement

· 800-Mhz Pentium III

· 128MB RAM

· Available PCI Slot

Company Contact:

• Posted By: sinovoip co., ltd.

• Phone: 8675526475332

• Address: 5/F, Comprehensive Building of Zhongxing Industry , Shenzhen , China

• Email:

• Website: http://www.sinovoip.com.cn

• Business Description: SinoVoip Co.
  
  Ltd was founded in 2004, is located in Nanshan District,
  
  Shenzhen Zhongxing Road Venture integrated five story North Building.
  
  Since its inception, following the world's most advanced network technology, combined with practical application in China, to develop their own intellectual property rights of new voice, data, images integrated IP access products, and strive to become the broadband IP line of video and audio terminals first class products and platform provider program.
  
  Company's existing products include: POE Switch, VOIP products , wirless products IPTV products, HTPC products, primarily serves the telecommunications operators, private network users (including government departments, schools, banking) and business users.
  
  Rely on the strong R & D capability, the source of a communication software to provide customers with the secondary development can provide a complete IP phone, IAD, GW technology, allows customers to speed with its own product line.
  
  Create our source of "market led technology, technology driven market, customer service, " the concept of autonomy through continuous research and development, now has a number of varieties of products.
  
  In accordance with their own advantages and characteristics of the company, we have the next ten years the development objectives are: to become the domestic first class IT enterprises, fully into the international market, develop into an international brand influence.
  
  To this end, the company's development strategy is: a market leading, technology driven, take their own R & D and technical cooperation in a combination of roads, on the one hand, closely integrated with customers, research and development for the communications products in China; on the other hand, with the international advanced technology companies and individuals to cooperate and jointly develop domestic and international communications markets.
  
  In the majority of customer care and support, Shenzhen SinoVoip Co., Ltd. will be fully working and make unremitting efforts to create "a source" of the national brand in China market, trustworthy company.
  
  Through continuous innovation, we are willing to provide customers with better products, better technology, better service, and create greater customer value.
  
  In order to meet the company's development needs, and further production capacity and product quality.
  
  Sources Communication shareholders decided to invest in new plant to build their own, the new factory site is located in manholes and covers an area of more than 4000 square meters, equipped with full range of production equipment and high quality technical management personnel .
  
  We have complete SMT production lines, plug ins production line, assembly line, production line testing.
  
  The new production plant for the source of a communication capacity of the product and product quality to provide a strong protection, the source of a communication will continue to provide customers with a steady flow of high quality product.
  
  Whole series of products have passed CE, FCC certification.
  
  welcome customers to our company to review our discussion cooperation and the factory.
  
  We can customize and develop kinds of products according to the demand of customers.
  
  And OEM&ODM are both welcomed.