16e1 4 10 100m Fiber Optical Multiplexer With Snmp Management And Lcd - China

16E1 fiber optical multiplexer, is use the PDH fiber transmission

technologies.

The 2M (E1) interfaces can connect with the exchanger,

light loop device and multi-diplexer directly to form the mircomidi or

the special network.

Complete alarm function for 16E1, it is stable and

easy to maintenance, install and small in size.

It has one digital

service telephone.

product character

Provides 16 E1 transparent transmission ;

Support 1+1 Fiber uplink protection for option;

With char 16*2 LCD display and SNMP agent inside.

support ALS function(Automatic Laser Shutdown)

Provide Console manage interface(RS232)

Provide 4 100M line Ethernet channel, support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.

;

Provice one hotline channel for option;

Provide two fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.

The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100KM;

E1 interface code is HDB3, E1 vibration characteristic conforms to ITU-T G.

703, G.

823 and G.

742;

Ethernet port supports full/half duplex, 10M/100M auto-ataptable;

Ethernet port supports VLAN function and has 4 division mode for user selection;

Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;

Has complete alarm function and can monitor remote device status;

Supports E1 loop from remote so as to detect and manage device conveniently;

The combination AC220V and DC-48V for redundant

Optical interface

Optical wavelength: 850nm/1310nm for multi- mode optical interface,

1310nm/1550nm for single-mode optic interface

Optical interface: SC/FC

Receiving and dispatching module: >-6dBm

Optical receiver receiving sensitivity <-36 (BER<10):

Dynamic range receiving: >-30dB

Transmitting range: Multi-mode 2 Km, single-mode 40Km, single-mode 60 Km, single-mode 120Km

Vibration characteristic: Satisfies G.

742 and the G.

823 standard

E1 interface

Interface code: HDB3 code

Line speed: 2.048Mbp/S ą50ppm

Interface standard: ITU-T G 703

Interface impedance: 75ohm/unbalanced or 120ohm/ balanced

Interface characteristic: supports rack (19 inches, 6U high), can reach up to 24 directions

10/100M Base-T interface:

Interface rate: 10/100Mbps

Interface characteristic: satisfies IEEE802.3, IEEE802.1Q

Connector: RJ45

RS232/Console port

Rate: 9600Kbps (Asynchronous)

Interface characteristic: Satisfies ITU-T V.

24 standard

Connector: RJ45

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

option I DC-48V, range DC-36V~DC-72C

option II AC220V, range AC165V~AC240V

Power Consumption: <=10 Watts

environment condition

Operating temperature: 0C~+50 C

Storage temperature: -20 C~+70 C

Relative temperature: 95% (uncondensed)

Company Contact:

• Posted By: Shanghai Baudcom Communication Device Co,.Ltd

• Phone: 862137709251

• Address: 519A,BuildingA,Lianming RD 389,Minhang District,Shanghai, Shanghai , China

• Email:

• Business Description: Shanghai Baudcom Communication Device Co., Ltd. is the leading
  
  manufactures and exporters from Shanghai, China.
  
  It is a high tech
  
  company that specializes in researching, developing, manufacturing and
  
  marketing data communication products.
  
  Baudcom products include 10/100M Managed Media Converter, 10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer, Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer, E1/V35/RS232 Fiber modems, voic10/100M+V.
  
  35/4E1/RS23 2/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter, V.
  
  35 to 10/100M converter, E1/V35/Ethernet G.
  
  SHDSL modem, TDM over IP, 8/16 channels CWDM platform, SFP modules, SFF transceiver, 1x9 transceiver and so on.