Outdoor Telecom Cabinet Pole Installed - China
price: contact company for price
The Telecommunication equipment cabinet is small form, low profile
outdoor telecommunication cabinet which is applicable for installation
of 6U equipment.
Technical specification of the outdoor cabinet:
General
The outdoor cabinet, for ETSI market, is intended to be used as enclosure for one 1U, or 2U, or 3U, or 4U (depending on the RL type) indoor unit of the Radio Link and/or other telecommunication equipment.
Functional design
The outdoor cabinet supports the following functions:
Standard 19” rack mountable option
6U space inside the cabinet for installing telecom equipment
4 Cooling (fans)
Heating system containing 1 Heater, 1 Heater Fan and thermostat
Cable interface
Support for mast installation
Grounding
The outdoor cabinet has a connection for protective earth.
Mounting options
The outdoor cabinet has two mounting options:
To be mounted on the wall
To be mounted to a pole (mast) with a diameter of 50 -120mm with adapters
Cable bushings (holes)
There are 6 (six) cable bushings (holes), in the bottom of the cabinet, for the following types of cables:
One shielded DC cable
One AC cable
Two radio (IF - Intermediate Frequency) coax cables
Two shielded traffic cables
Internal space of the cabinet
Height: Standard 19” rack mountable option
Width: 6U space inside the cabinet for installing telecom equipment
Depth: 300mm
Alarms
The cabinet supports fan and door open alarms
Environmental requirements:
Temperature:
Low temperature -45 degree celsius
High temperature +45 degree celsius
Relative humidity of 8 -100% Rh
Solar intensity of max 1120W/m2
Wind
The equipment shall withstand following wind speed:
Operational: 50m/s
Survival: 70m/s
Ingress protection of enclosure, IP class
The cabinet is made of aluminum alloy and complies with Ingress Proof according to IP55 class
The parts used in the cabinet:
2 x Internal fans
2 x External fans
1 x Heater including heater fan
1 x Thermostat
1 x Control board
2 x Temperature sensors on the control board
The control board controls the rotation speed of the fans according to the cabinet’s internal temperature information collected by the temperature sensor.
The control board has fan alarm output and temperature alarm output.
Company Contact:
- Phone: 008613752765943
- Address: OFFICE ZONE, YANTAI ROAD, TANGGU, BINHAI NEW AREA,, Tianjin , China
- Email:
- Website: http://www.estel.com.cn
Published date: December 19, 2013
- Business Description: Tianjin Estel Electronic Science and Technology Co., Ltd, located in
China, is an outdoor telecom cabinet supplier.
We specialize in
design and production of telecom cabinets.
We can also provide
cooling solutions for telecom cabinets, including air to air heat
exchanger, air conditioner, etc.
We also offer OEM service.
We can
supply different types of cabinets according to each customer s
special design, drawing or requirement.
Most of the cabinets are
customized cabinets.
Our products and solutions have been deployed
all over China.
Besides, our products have been exported to Europe,
America, Asia, Africa, Australia etc.
We are a telecom cabinet
supplier for HUAWEI and EMERSON.
The outdoor telecom cabinet is
mainly used in the field of telecom, network, traffic, CATV,
electrical power etc.
It can be used under different conditions:
gale, rain, snow, hail, frost, smog, and solar radiate etc.
The main
part of the cabinet can be made of steel, aluminium alloy, or
stainless steel.
Surface treatment: outdoor powder coating, anti
corrossion.
There re three cooling choices for the cabinet: air
conditioner, heat exchanger, fan.
Customers First, Quality First is always our principle.
We will
always try our best to meet customers need and requirement.
Welcome overseas customers to make enquiry.
Website: www.
estel.
com.
cn
Tel: 0086 13752765943
Skype: fiona.
liang10
MSN: fionaliangchina@hotmail.
c om
Email: info@estel.
com.
cn
Related listings
-
Outdoor Telecom CabinetCommunications - Equipment - TIANJIN ESTEL ELECTRONIC SCIENCE AND TECHNOLOGY CO - China - December 19, 2013 - contact company for price
1. Dimensions (Height x Width x Depth): 1780 x 670 x 515 mm 2. Protection Rating: IP55 3. Equipment Load Bearing Capacity: 250 Lb 4. Equipment Rack: Standard 19” Rack with 39 U space 5. Cooling System: 80 W/K Heat Exchanger; Door Installed; Thermosta...
-
Fiber Optic Adapter FcCommunications - Equipment - Shenzhen Changxiang Photoelectric Techno - China - December 18, 2013 - contact company for price
Features: Good compatibility High precision of mechanical dimensions Good reliability & stability Ceramic or Bronze Sleeve Three types of fiber stub port:PC, APC, UPC Single mode/Muti-mode Various styles:Squareness, Circular and Square link to...
-
Fiber Polishing Machine Cx 12a 1Communications - Equipment - Shenzhen Changxiang Photoelectric Techno - China - December 18, 2013 - contact company for price
Central Pressurized Polisher 1. Overview Automatic central pressurized polisher use industry-specific microcomputer development and into. Set motor speed, time and count in an organic whole, improve the stability of the machine. Adopting advanced tec...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"