99 visiting now: 98 USA USA flag 3 Singapore Singapore flag 1 Germany Germany flag 1 Ireland Ireland flag 1 UK UK flag 1 Canada Canada flag 1 Finland Finland flag

Highlighted Companies

  • YESN-China shipping Labels manufacturer-compatible label factory (China): XIAMEN YESN-China shipping Labels manufacturer-compatible... http://www.yesnlabels.com
  • Eagle Eyes China Inspection Company (China): Eagle Eyes (CHINA) Quality Inspection Co.,Ltd. is a professional Third... https://www.china-qualityinspection.com
  • 3m 9 8ft 40gbase Qsfp To Lc Sc St Fc Connector 8 Breakout Active Optical Cable - USA

    price: 249.60 Dollar US$

    40GBASE QSFP+ to eight LC/SC/ST/FC Connector Breakout Active Optical Cable are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe.

    It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4 - QSFP+ Breakout Cable is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.

    QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect within racks and across adjacent racks.

    This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable.

    All our 40GBASE QSFP+ to LC/SC/ST/FC Connector(8) Breakout Active Optical Cable are 100% compatible with major brands like Cisco, Juniper, Enterasys, Extreme, H3C and so on.

    If you would like to order high quality compatible 40GBASE QSFP+ to LC Connector(8) Breakout Active Optical Cable and get worldwide delivery, we believe Fiber-mart.

    COM is your best choice.

    Specifications

    Connector 1: QSFP+

    Connector 2: 8 x LC/SC/ST/FC Connector

    Length: 3 meters

    Cable Type: AOC Cable

    Full duplex 4 channel 850nm parallel active optical cable

    Transmission data rate up to 10.3Gbit/s per channel

    SFF-8436 QSFP+ compliant housing and hot pluggable electrical interface.

    Management Interface and digital diagnostic monitoring(DDM) through I2C

    Support Rx output pre-emphasis

    4ch 850nm VCSEL array

    4ch PIN photo detector array

    Helix type multi-mode optical fibre cable of up to 100m

    OFNP (Optical Fibre Non-Conductive Plenum) rated cable

    Differential AC-coupled high speed data interface

    Housing isolated from connector ground

    Operating Temperature: 0 to 70℃

    RoHS 6 compliant

    3.3V power supply voltage Applications

    Infiniband transmission at 4ch SDR(2.5Gbit/s), DDR(5Gbit/s) and QDR(10Gbit/s)

    Multi-channel 10Gb Ethernet transmission up to 4 channels

    Fiber Channel transmission at 8.5Gbit/s per channel, up to 4 channels

    QSFP+ to LC/SC/ST/FC cables with MT connectors for plugging into existing cable runs or patch pannels

    Creating a breakout cable with four Duplex LC connectors for port expander applications

    SDR /DDR /QDR

    Data Centers


    Company Contact:


    • Phone: + 86 13632576201

    • Address: 118 East Melinda Lane, Phoenix, Arizona , USA

    • Email: Email


    Published date: August 23, 2018

    • Business Description: Fiber Optic Network, Fiber Transceiver,

      Bulk fiber optic cables, Fiber tester and Tools, Cable Management

    Related listings



    • 40gbase Plr4 Qsfp 1310nm 10km Mpo Transceiver For Smf
      40gbase Plr4 Qsfp 1310nm 10km Mpo Transceiver For Smf
      Communications - Equipment - Fiber-MART.LLC - USA - August 23, 2018 - 715.00 Dollar US$

      QSFP-40G-PLR4-10 Fiber-Ma rt 40GBASE-PLR4 QSFP+ Module supports link lengths of up to 10km over a standard pair of G.652 single-mode fiber with MPO connectors.The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultipl...

    • Cisco 10gbase Cwdm Sfp 1310nm 40km Compatible Transceiver
      Cisco 10gbase Cwdm Sfp 1310nm 40km Compatible Transceiver
      Communications - Equipment - Fiber-MART.LLC - USA - August 23, 2018 - 280.00 Dollar US$

      CWDM-SFP10G-40 The CWDM-SFP10G-40 series optical transceiver is designed for fiber communications application up to 10G, which fully compliant with the specification of SFP+ MSA SFF-8431.This module is designed for single mode fiber and operates at a...

    • 30dbm Output Compact Full Functional High Power Fiber Amplifier Module
      30dbm Output Compact Full Functional High Power Fiber Amplifier Module
      Communications - Equipment - Fiber-MART.LLC - USA - August 23, 2018 - 3783.00 Dollar US$

      30dBm Output Compact Full Functional High Power Fiber Amplifier Module This Compact Full Functional High Power Fiber Amplifier Module is a kind of C-Band, high power and full-function optical fiber amplifier module. The key components of the product ...



    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"