16e1 To 4ethernet Convergence Protocol Converter - China

The 16E1 to 4 ethernet convergence protocol converter is multi-E1

convergency type bridge communication equipement, which bandwidth can be

divided into 1~16channels according to user’s requirement.

The device

support point to multipoint application and point to point application.

Functions

BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement.

The device can be used as 16E1 to 4FE access gateway.

The convergence converter’s bandwidth can be divided into 1~16channels according to user’s requirement.

One or multi-E1 lines are divided into one channel which carries the Ethernet data transparently.

This device supports 16 channels E1 and 4ethernet multiplexing, realizing the interconnection between E1 and GFP Ethernet.

Back LCAS, LAPS, and any 16E1 binding transmission, equipped with ITU-T G.

813 NE timing, VC-12 cross connection and channel protection functions.

The convergency converter can support point to multi-point application (one 16E1 converter can work with 8E1 to Ethernet converter, 4E1 to Ethernet converter and E1 to Ethernet converter).

The device also can be used as point to point application, two 16E1 converter work together.



The device support SNMP management.

By the network management, the user can bind any E1 lines and divide them into 1~16channels.

The convergency converter is based on unifying network management platform and designed according to ITU-T standard, achieving network resource, device configuration, alarm and performance management.

Features

Offer 16 channels E1 service interfaces；the 16E1 lines can be divided into different channels.



Support ITU-T G.

813 net element timing, and automatically realize the shift between serval timing resources;

Offer a pair of clock interfaces, and can input 2M clock signal according to your needs;

Most 4 channels 10/100Base-Tx interfaces, support GFP/LAPS encapsulation;

Support point to multi-point application and point to point to point application;

Support 2 management modes SNMP network management, CONSOLE local terminal；

Dual power modules, -48V DC or 220V AC.

E1 Interface

Rate 2.048Mb/s±50ppm

Coding HDB3

Standard ITU-T G.

703

Connector RJ45（120ΩA 289;，BNC（75 Ω）

Impedance 75Ω/unbalanced, 120Ω/balanced

Jitter Compliant with ITU-T G.

823

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

option I – DC-48V, range DC-36V~DC-72C

option II – AC220V, range AC165V~AC240V

Power Consumption: <=5 Watts

Dimension

1U/19”: 483（W）̸ 2; 140（L）̸ 2; 44（H）mm

environment condition

Operating temperature: -10C~+50 C

Storage temperature: -40 C~+70 C

Relative temperature: 95% (uncondensed)

Company Contact:

• Posted By: Shanghai Baudcom Communication Device Co,.Ltd

• Phone: 862137709251

• Address: 519A,BuildingA,Lianming RD 389,Minhang District,Shanghai, Shanghai , China

• Email:

• Business Description: Shanghai Baudcom Communication Device Co., Ltd. is the leading
  
  manufactures and exporters from Shanghai, China.
  
  It is a high tech
  
  company that specializes in researching, developing, manufacturing and
  
  marketing data communication products.
  
  Baudcom products include 10/100M Managed Media Converter, 10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer, Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer, E1/V35/RS232 Fiber modems, voic10/100M+V.
  
  35/4E1/RS23 2/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter, V.
  
  35 to 10/100M converter, E1/V35/Ethernet G.
  
  SHDSL modem, TDM over IP, 8/16 channels CWDM platform, SFP modules, SFF transceiver, 1x9 transceiver and so on.